Month: May 2021

Synthetic Route of 246047-72-3, Children learn through play, and they learn more than adults might expect. Science experiments are a great way to spark their curiosity, get their minds active, and encourage them to do something that doesn’t involve a screen. 246047-72-3, C46H65Cl2N2PRu. A document type is Article, introducing its new discovery.

Ladder-shaped polyether (LSP) toxins represented by brevetoxins and Ciguatoxins are thought to bind to transmembrane (TM) proteins. To elucidate the interactions of LSPs with TM proteins, we have synthesized artificial ladder-shaped polyethers (ALPs) containing 6/7/6/6 tetracyclic, 6/7/6/6/7/6/6 heptacyclic, and 6/7/6/6/7/6/6/7/6/6 decacyclic systems, based on the convergent method via alpha-cyano ethers. The ALPs possessing the simple iterative structure with different numbers of rings would be useful for structure-activity relationship studies on the molecular length, which is supposed to be important when naturally occurring LSPs elicit their toxicity. Two series of ALPs were prepared to evaluate the hydrophilic or hydrophobic effects of the side chains: (i) both sides were functionalized as diols (A series), and (ii) one side remained as diol and the other side was protected as benzyl ethers (B series). To examine the interaction of these ALPs with TM proteins, dissociation of glycophorin A (GpA) dimers into monomers was evaluated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The heptacyclic ether (ALP7B) elicited the most potent activity in the presence of 2% SDS buffer, whereas the decacyclic ether (ALP10A) exhibited an intriguing phenomenon to induce precipitation of GpA in a dose-dependent manner, under the low concentration of SDS (0.03%). ALP10A also induced precipitation of integrin alpha 1beta1, a TM protein known to form heterodimers in the lipid bilayer membranes. The different activities among the ALPs can be accounted for by the concept of “hydrophobic matching” that is, lengths of the hydrophobic region including the side chains of ALP7B and ALP10A are ca. 25 A, which match the lengths of the hydrophobic region of alpha-helical TM proteins, as well as the hydrophobic thickness of lipid bilayer membranes. The concept of the hydrophobic matching would be a clue to understanding the interaction between LSPs and TM proteins, and also a guiding principle to design ALPs possessing potent affinities with TM proteins.

If you are hungry for even more, make sure to check my other article about 246047-72-3. Synthetic Route of 246047-72-3

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Electric Literature of 32993-05-8. Chemistry is an experimental science, and the best way to enjoy it and learn about it is performing experiments.Introducing a new discovery about 32993-05-8, Name is Chlorocyclopentadienylbis(triphenylphosphine)ruthenium(II)

The dinuclear dicationic vinylidene complex {[Ru]=C-C(Ph)CH 2C(CH2CN)=C=[Ru]}2+ (7a, [Ru] = Cp(PEt 3)2Ru) is prepared from the reaction of ICH2CN with {[Ru]=C=C(Ph)CH2C?C[Ru]}+ (6a). Deprotonation of 7a by n-Bu4NOH is followed by a cyclization process yielding the stable complex 9a, containing a five-membered carbocyclic ring ligand, which is fully characterized by 2D-NMR analysis and a single-crystal X-ray diffraction analysis. Similarly deprotonation of {[Ru]=C=C(Ph)CH2C(CH 2-COOEt)=C=[Ru]}2+ (8a) gave the stable product lia containing a bridging ligand also with a similar five-membered carbocyclic ring. The cyclization process is affected by an ancillary ligand on the Ru metal center. Thus the analogous dinuclear complex 9b, with a bistriphenylphosphine ligand on one metal, which is prepared in a similar manner from {[Ru]=C=C(Ph)CH2C(CH2CN)=C=[Ru?]}2+ (7b, [Ru?] = Cp(PPh3)2Ru), is unstable, undergoing isomerization to give the dinuclear complex 10b, containing a cyclopropenyl ligand.

If you are hungry for even more, make sure to check my other article about 32993-05-8. Electric Literature of 32993-05-8

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

A catalyst don’t appear in the overall stoichiometry of the reaction it catalyzes, but it must appear in at least one of the elementary reactions in the mechanism for the catalyzed reaction. 37366-09-9, Name is Dichloro(benzene)ruthenium(II) dimer, molecular formula is C12H12Cl4Ru2. In a Article，once mentioned of 37366-09-9, Safety of Dichloro(benzene)ruthenium(II) dimer

Reaction of <(eta6-C6H6)RuCl2>2 with pyrazole (Hpz) in appropriate molar ratio at room temperature in H2O/CH3OH yields the products <(eta6-C6H6)Ru(mu-Cl)(mu-pz)2Ru(eta6-C6H6)>Cl (1a) and <(eta6-C6H6)Ru(mu-Cl)2(mu-pz)Ru(eta6-C6H6)>Cl (2a), the structure of which were established by an X-ray study.Analogous binuclear complexes 3a and 4a were prepared with 4-methylpyrazole (4MepzH).The facile Cl-/OH- exchange in these complexes has been studied by 1H NMR spectroscopy to elevated temperatures.The hydroxo-bridged complexes <(eta6-C6H6)Ru(mu-OH)(mu-pz)2Ru(eta6-C6H6)>Cl (1b) and <(eta6-C6H6)Ru(mu-OH)2(mu-pz)Ru(eta6-C6H6)>Cl (2c) were also be prepared directly from <(eta6-C6H6)RuCl2>2 and pyrazole by refluxing in H2O/CH3OH solution.Reaction of <(eta6C6H6)RuCl2>2 with 6-azauracil (6auraH)Ru(eta6-C6H6)>Cl (6), the crystal structure of which is reported.A chloro-bridged binuclear complex could not be prepared; the analogous reaction in methanol alone gives <(eta6-C6H6)RuCl2(6auraH2)> (7).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data.Safety of Dichloro(benzene)ruthenium(II) dimer, If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 37366-09-9, in my other articles.

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature.15746-57-3, Name is Cis-Dichlorobis(2,2′-bipyridine)ruthenium(II), molecular formula is C20H16Cl2N4Ru. In a Article，once mentioned of 15746-57-3, Formula: C20H16Cl2N4Ru

The diketonate group of the peripheral position in chlorophyll derivatives 1 and 2 coordinated ruthenium bisbipyridine to give direct linkages 3-5 of the chlorin ring with the Ru(II) complex. Zinc metalation of the central position in the chlorin ring of free base 3 afforded the Ru-Zn binuclear complex 3-Zn. Because the diketonate group at the C3 position of chlorophyll derivatives coordinated to bulky Ru(bpy)22+, the plane of the diketonate group was twisted from the chlorin pi ring in synthetic 3-5 and 3-Zn to lead to a partial deconjugation and a slight blue shift of the longest wavelength electronic absorption band in dichloromethane. A broad metal-to-ligand charge-transfer absorption band derived from the Ru complex was observed around 500 nm, in addition to visible absorption bands from the chlorophyll moiety. Chlorophyll derivatives 3-5 and 3-Zn directly coordinating the ruthenium complex were less fluorescent in dichloromethane than chlorophyll-diketonate ligands 1, 2, and 1-Zn due to the heavy atom effect of the ruthenium in a molecule. The coordination to the ruthenium complex moiety at the peripheral position shifted the electrochemical reduction of the chlorin part in acetonitrile to a negative potential, and the coordination to zinc at the central position decreased the redox potentials. Chemical modification of the bipyridine and diketonate ligands of the ruthenium complexes greatly affected the redox potentials of Ru(II)/(III) and/or Ru(II)/(I) but minimally the redox properties of the chlorin moiety. Substitution with electron-donating groups shifted the former to a negative potential but only barely shifted the latter. The zinc metalation caused no apparent shifts for the redox potentials of the Ru center.

Note that a catalyst decreases the activation energy for both the forward and the reverse reactions and hence accelerates both the forward and the reverse reactions.Formula: C20H16Cl2N4Ru, you can also check out more blogs about15746-57-3

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

A catalyst don’t appear in the overall stoichiometry of the reaction it catalyzes, but it must appear in at least one of the elementary reactions in the mechanism for the catalyzed reaction. 10049-08-8, Name is Ruthenium(III) chloride, molecular formula is Cl3Ru. In a Article，once mentioned of 10049-08-8, category: ruthenium-catalysts

Chemical and electrochemical behavior of some fission elements and components of fuel elements and structural materials in salt melts based on alkali metal chlorides was studied. Possible ways of incorporation of impurity elements into the cathodic deposit were analyzed as influenced by the position of the elements in the electromotive series, current density, and composition of the gaseous phase over the melt. The effect of impurities on electrochemical crystallization of UO2 was evaluated. The composition and structure of the cathodic deposit at formation of solid solutions were studied in relation to the content of impurity elements in the melts.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data.category: ruthenium-catalysts, If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 10049-08-8, in my other articles.

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Electric Literature of 37366-09-9. Chemistry is an experimental science, and the best way to enjoy it and learn about it is performing experiments.Introducing a new discovery about 37366-09-9, Name is Dichloro(benzene)ruthenium(II) dimer

The selective dehydrogenation of aqueous solutions of HCOOH/HCOONa to H2 and CO2 gas mixtures has been investigated using RuCl3·3H2O as a homogeneous catalyst precursor in the presence of different monoaryl-biaryl or alkyl-biaryl phosphines and aryl diphosphines bearing sulfonated groups. All catalytic systems were used in water without any additives and proved to be active at 90 C, giving high conversions and good TOF values. As an alternative Ru(II) metal precursor, the known dimer [Ru(eta6-C6H6)Cl2]2 was also tested as in situ catalyst with selected phosphines as well as an isolated Ru(II)-catalyst with one of them. By using high-pressure NMR (HPNMR) techniques, indications on the nature of the active species involved in the catalytic cycles were obtained.

If you are hungry for even more, make sure to check my other article about 37366-09-9. Electric Literature of 37366-09-9

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Related Products of 246047-72-3, Children learn through play, and they learn more than adults might expect. Science experiments are a great way to spark their curiosity, get their minds active, and encourage them to do something that doesn’t involve a screen. 246047-72-3, C46H65Cl2N2PRu. A document type is Article, introducing its new discovery.

Density functional theory calculations are reported concerning the dissociative mechanism for alkene metathesis by ruthenium dichloride catalysts, including both bisphosphine and diaminocarbene/phosphine complexes. The calculations use a hierarchy of models, ranging from [(L)(PH3)Ru(Cl) 2(CH2)] (L = PH3 or diaminocarbene) through the larger [(L)(PMe3)Ru(Cl)2(CHPh)] to the “real” [(L)(PCy3)Ru(Cl)2(CHPh)]. Calculations show that the rate-limiting step for metathesis is either ring closing from an alkene complex to form a ruthena-cyclobutane, or ring-opening of the latter intermediate to form an isomeric alkene complex. The higher efficiency of the diaminocarbene based catalysts is due to the stabilization of the formal +IV oxidation state of the ruthenium centre in the metallacycle. This effect is partly masked in the smaller model systems due to a previously unnoticed stereoelectronic effect. The calculations do not reproduce the experimental observation whereby the initiation step, phosphine dissociation, is more energetically demanding and hence slower for the diaminocarbene-containing catalyst system than for the bisphosphine. Further calculations on the corresponding bond energies using a variety of DFT and hybrid DFT/molecular mechanics methods all find instead a larger phosphine dissociation energy for the bisphosphine catalyst. This reversed order of binding energies would in fact be the one expected based on the stronger trans influence of the diaminocarbene ligand. The discrepancy with experiment is small and could have a number of causes which are discussed here. The Royal Society of Chemistry 2005.

If you are hungry for even more, make sure to check my other article about 246047-72-3. Related Products of 246047-72-3

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

10049-08-8, Name is Ruthenium(III) chloride, molecular formula is Cl3Ru, belongs to ruthenium-catalysts compound, is a common compound. In a patnet, once mentioned the new application about 10049-08-8, COA of Formula: Cl3Ru

Three ruthenium(III) complexes containing 1H-1,2,4-triazole (Htrz), viz., (H2trz)[cis-RuCl4(Htrz)2], 1, (H 2trz)[trans-RuCl4(Htrz)2], 2, and (Ph 3PCH2Ph)[trans-RuCl4(Htrz)2], 3, have been synthesized by reaction between RuCl3 and excess of the triazole in 2.38 M HCl (1 and 2), while 3 was obtained by metathesis of 2 and [Ph3PCH2Ph]Cl in water. The products were characterized by IR, UV-vis, electrospray mass spectrometry, cyclic voltammetry, and X-ray crystallography (1 and 3). X-ray diffraction study revealed cis and trans arrangements of the triazole ligands in 1 and 3, correspondingly, and unprecedented monodentate coordination of the triazole through N2 and stabilization of its 4H tautomeric form, which is the disfavored one for the free triazole. The cytotoxicity of 1 and 2 has been assayed in three human carcinoma cell lines SW480, HT29 (colon carcinoma), and SK-BR-3 (mammary carcinoma). Both compounds exhibit antiproliferative activity in vitro. Time-dependent response of all three lines to 1 and 2 and a structure-activity relationship, i.e., higher activity of the trans-isomer 2 than that of cis-species 1, have been observed.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law.COA of Formula: Cl3Ru. In my other articles, you can also check out more blogs about 10049-08-8

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

32993-05-8, Name is Chlorocyclopentadienylbis(triphenylphosphine)ruthenium(II), molecular formula is C41H35ClP2Ru, belongs to ruthenium-catalysts compound, is a common compound. In a patnet, once mentioned the new application about 32993-05-8, Application In Synthesis of Chlorocyclopentadienylbis(triphenylphosphine)ruthenium(II)

Ruthenium complexes [(eta5-C5H5) Ru(PPh3)(kappa2-paa)]PF6 (paa = pyridine-2-carbaldehyde azine) and [(eta5-C5H 5)Ru(kappa1-dppm)-(kappa2-paa)]BF 4 [dppm = bis(diphenylphosphanyl)methane] have been employed as a synthon in the synthesis of homo/hetero bi-/trimetallic complexes. It is the uncoordinated N,N-donor site on paa in complex [(eta5-C 5H5)Ru(PPh3)-(kappa2-paa)]PF 6, and N,N-donor site on paa and pendant phosphorus in [(eta5-C5H5)Ru(kappa1-dppm) (kappa2-paa)]BF4 that allows for their incorporation into bi-/trimetallic systems. The resulting complexes have been characterized by analytical, spectral and electrochemical studies. Molecular structures of homobimetallic complex [(PPh3)(theta5-C 5H5)Ru(mu-paa)Ru(theta6-C 10H14)Cl](PF6)2 and hetero-bimetallic complex [(PPh3)(theta5-C 5H5)-Ru(mu-paa)Rh(theta5-C 5Me5)Cl](PF6)2 have been authenticated crystallographically. Complexes exhibit absorptions throughout the visible region and complicated electrochemical behaviour. Metal-based Ru II/RuIII oxidations in the bimetallic complexes do not vary as in the trimetallic complexes. Wiley-VCH Verlag GmbH & Co. KGaA, 2008.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law.Application In Synthesis of Chlorocyclopentadienylbis(triphenylphosphine)ruthenium(II). In my other articles, you can also check out more blogs about 32993-05-8

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature.246047-72-3, Name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, molecular formula is C46H65Cl2N2PRu. In a Article，once mentioned of 246047-72-3, COA of Formula: C46H65Cl2N2PRu

Abstract The activity and selectivity of silica-supported Hoveyda-Grubbs (HG) complex for the cross-metathesis of methyl oleate with 1-hexene to obtain 1-decene, methyl 9-tetradecenoate, 5-tetradecene and methyl 9-decenoate were studied in a batch reactor. The HG complex loading was varied between 0.87 and 11.6 wt%. Competitive secondary reactions were the self-metathesis of methyl oleate and the self-metathesis of 1-hexene. The yield to cross-metathesis products (etaC-M) was 47% when a 1-hexene/methyl oleate reactant ratio (RC6/MO) of one was employed. The etaC-M value increased with increasing 1-hexene initial concentration, reaching 87% for RC6/MO = 7. The selectivity to terminal olefins also increased at the expense of internal olefins among the cross-metathesis products when the concentration of 1-hexene was increased.

The reactant in an enzyme-catalyzed reaction is called a substrate. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.I hope my blog about 246047-72-3 is helpful to your research., COA of Formula: C46H65Cl2N2PRu

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI