246047-72-3| Page 100 of 122 | Ruthenium catalysts

The important role of 246047-72-3

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, 246047-72-3

246047-72-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

After a 50 mL two-necked flask was purged with argon, the ligand 3 cp (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with an argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After completion of the reaction, silica gel was added to the filtrate after filtration, and the crude product was obtained by silica gel column chromatography, and then washed with methanol or pentane-DCM to obtain a green solid product 4cp, yield: 68%.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Introduction of a new synthetic route about 246047-72-3

The chemical industry reduces the impact on the environment during synthesis,246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,I believe this compound will play a more active role in future production and life.

To a solution of 1-isopropoxy-4-(perfluorodecyl)-2-vinylbenzene (35.5mg, 0.052mmol) in dry CH2Cl2 (4 mL) was added Grubbs 2nd generation (48.75 mg, 0.057 mmol) and CuCl (I) (8.2 mg, 0.083 mmol) under N2 at 35C and stirred for 3 h. The reaction mixture was concentrated in vacuo, and the residue was purified by column chromatography on silica gel (hexane / CH2Cl2 = 1 / 1) to give 1a (39.5mg, 65%).

Reference£º
Article; Kobayashi, Yuki; Inukai, Sae; Kondo, Natsuki; Watanabe, Tomoko; Sugiyama, Yuya; Hamamoto, Hiromi; Shioiri, Takayuki; Matsugi, Masato; Tetrahedron Letters; vol. 56; 11; (2015); p. 1363 – 1366;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Analyzing the synthesis route of 246047-72-3

246047-72-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,246047-72-3 ,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, other downstream synthetic routes, hurry up and to see

It is a common heterocyclic compound, the ruthenium-catalysts compound, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3 its synthesis route is as follows.

A suspension of 1.50 g (1.77 mmol) of [RuCl2(PCy3)(ImH2Mes)(phenylmethylene)] (commercially available from Sigma- Aldrich Inc., St. Louis, USA), 0.19 g (1.94 mmol) of copper chloride and 0.51 g (1.94 mmol) of N,N-diethyl-2-[((E,Z)-2-propenyl)-phenoxy]- propionamide as a 4: 1 mixture of E/Z-isomers in 1 10 ml of dichloromethane was stirred for 40 min at 400C. The reaction mixture was evaporated to dryness at 400C/ 10 mbar. The crude title product was purified by repeated digestion with ethylacetate / pentane / tetrahydrofuran to yield 0.73 g (58%) of the title compound as a green crystalline solid.MS: 711.2 (M+). Anal, calcd. for C35H45Cl2N3O2Ru: C, 59.06; H, 6.37; N, 5.90; Cl, 9.96. Found: C, 58.56; H, 6.44; N, 5.23; Cl, 9.86.Crystals of the title compound suitable for X-ray crystal structure analysis were grown by vapor diffusion of pentane into a solution of 20 mg of [RuCl2(=CH(o- OCH(Me)CONEt2)Ph)(ImH2MeS)] in 2 ml of tetrahydrofuran at room temperature.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; WO2009/124853; (2009); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Downstream synthetic route of (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, and cas is 246047-72-3, its synthesis route is as follows.

After a 50 mL two-necked flask was replaced with argon, the ligands 3bx (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was completed, silica gel was added to the filtrate to produce sand. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain 4bx as a green solid, yield: 65%.

Application of 246047-72-3

After a 50 mL two-necked flask was replaced by argon, the ligand 5a (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with an argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was completed, silica gel was added to the filtrate to produce sand. The crude product was obtained by silica gel column chromatography, and then washed with methanol or pentane-DCM to obtain yellow-green solid product 6a in a yield of 79%.

The important role of (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

After a 50 mL two-necked flask was purged with argon, the ligand 3cw (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with an argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate after filtration to obtain sand. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain a green solid product 4cw, yield: 85%.

Share a compound : 246047-72-3

Name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 246047-72-3, its synthesis route is as follows.

After a 50 mL two-necked flask was purged with argon, the ligands 5 s (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was completed, silica gel was added to the filtrate to prepare a sand product. The crude product was obtained by silica gel column chromatography, and then washed with methanol or pentane-DCM to obtain a yellow-green solid product 6s in a yield of 37%.

Some tips on 246047-72-3

General procedure: The product was synthesized using in-situ generated Grubbs-Hoeyda 2nd generation catalyst.Therefore Grubbs 2nd generation catalyst (0.1 mmol, 0.02 equiv.) was dissolved in drydichloromethane (5 mL), 1-Isopropoxy-2-vinylbenzene (0.1 mmol, 0.02 equiv.) and copper(I)chloride(0.1 mmol, 0.02 equiv.) were added and the reaction mixture was stirred at reflux for 45 min until thecolour turned green. After cooling to room temperature VCP XX (5 mmol, 1 equiv.) and methylacrylate (30 mmol, 6 equiv.) were added and the reaction mixture was stirred at reflux for 16 h, afterwhich additional methyl acrylate (10 mmol, 2 equiv.) was added and stirred for another 7 h at reflux.The product was obtained via column chromatography on silica gel (5:1 petroleum ether/ethylacetate) as a white powder

Reference£º
Article; Pursley, Dominik; Plietker, Bernd; Synlett; vol. 25; 16; (2014); p. 2316 – 2318;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Downstream synthetic route of (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid.

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

The important role of (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

With the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.246047-72-3, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium An updated downstream synthesis route of 246047-72-3 as follows., 246047-72-3

A suspension of 218 mg (0.26 mmol) of [RuCl2(PCy3) (ImH2Mes)(phenylmethy- lene)], 26 mg (0.26 mmol) copper chloride and 49 mg (0.29 mmol) 2-methyl-8-vinyl- quinoline in 17 ml methylene chloride was stirred at 300C for 90 min. The reaction mixture was evaporated to dryness and the isolated crude product purified by silica gel chromatography (hexane / ethyl acetat 7:3) and finally digested in 15 ml hexane at room temperature for 30 min to yield 157 mg (96%) of the title compound as green crystals. MS: 632.9 (M+). 1H-NMR (300 MHz, C6D6): 2.15 (s, 3H); 2.29 (s, 6H); 2.64 (s, 12H); 3.49 (s, 4H); 6.30 (d, J=8.4Hz, IH); 6.80 (t, J=7.3Hz, IH); 6.98 (s, 4H); 7.10 (d, J=8.4Hz, IH); 7.40 (d, J=8.1Hz, IH); 7.52 (d, J=7.0Hz, IH), 17.15-17.32 (br, IH). Anal, calcd. for C32H35N3Cl2Ru: C, 60.66; H, 5.57; N, 6.63; Cl, 11.19. Found: C, 60.33; H, 5.58; N, 6.27; Cl, 10.90.

With the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; WO2008/644; (2008); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI