Category: 246047-72-3

246047-72-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, 246047-72-3

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

It is a common heterocyclic compound, the ruthenium-catalysts compound, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3 its synthesis route is as follows.

To a solution of 9 (59.7 mg, 0.098 mmol) in anhydrous CH2Cl2 (6.0 ml) was added 2ndgeneration Grubbs catalyst (75.3 mg, 0.088 mmol) and CuCl (I) (19.8 mg, 0.20 mmol)under nitrogen at 30 C and stirred for 3 h. The reaction mixture was concentrated invacuo, and the residue was purified by column chromatography on silica gel (hexane /CH2Cl2 = 1 / 1) to give 2j (43.2 mg, 41%).Green crystals; mp 153-157 C; 1H NMR (270 MHz, CDCl3) delta 2.38 (s, 6H), 2.45 (s,12H), 4.21 (s, 1H), 4.90-4.82 (m, 1H), 6.62 (d, J = 12.4 Hz, 1H), 7.07 (s, 5H), 16.22 (s,1H); 19F NMR (466 MHz, CDCl3) delta -80.6 (3F), -106.3 (1F), -108.5 (2F), -121.4 (2F),-121.5 (2F), -122.6 (4F), -125.9 (2F); 13C NMR (68 MHz, CDCl3) delta 19.4, 20.9, 51.4,77.5, 102.8, 103.2, 122.3, 129.4, 139.1, 141.8, 155.8, 155.9, 158.3, 162.1, 209.2, 291.7;IR (FT) 3905, 3857, 3747, 3642, 3569, 2971, 2918, 2363, 2342, 1837, 1723, 1691, 1612,1586, 1486, 1424, 1293, 1213, 1156, 1104, 1029, 915, 846 cm-1; HRMS (FAB) m/z[M+H]+ calcd for C39H37Cl2F18N2ORu 1064.1039; found 1064.1049.

246047-72-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,246047-72-3 ,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Kobayashi, Yuki; Suzumura, Naoki; Tsuchiya, Yuki; Goto, Machiko; Sugiyama, Yuya; Shioiri, Takayuki; Matsugi, Masato; Synthesis; vol. 49; 8; (2017); p. 1796 – 1807;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, Adding a certain compound to certain chemical reactions, such as: 246047-72-3, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 246047-72-3

To a solution of 1-isopropoxy-4-(perfluorodecyl)-2-vinylbenzene (35.5mg, 0.052mmol) in dry CH2Cl2 (4 mL) was added Grubbs 2nd generation (48.75 mg, 0.057 mmol) and CuCl (I) (8.2 mg, 0.083 mmol) under N2 at 35C and stirred for 3 h. The reaction mixture was concentrated in vacuo, and the residue was purified by column chromatography on silica gel (hexane / CH2Cl2 = 1 / 1) to give 1a (39.5mg, 65%).

246047-72-3, As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Reference£º
Article; Kobayashi, Yuki; Inukai, Sae; Kondo, Natsuki; Watanabe, Tomoko; Sugiyama, Yuya; Hamamoto, Hiromi; Shioiri, Takayuki; Matsugi, Masato; Tetrahedron Letters; vol. 56; 11; (2015); p. 1363 – 1366;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials.246047-72-3, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium A new synthetic method of this compound is introduced below.

General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid.

246047-72-3, As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

After a 50 mL two-necked flask was purged with argon, the ligand 3m (10 mmol), 30 mL of CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate after filtration to obtain sand. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain a green solid product 4m. The yield was 84%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, 246047-72-3

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

It is a common heterocyclic compound, the ruthenium-catalysts compound, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3 its synthesis route is as follows.

General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid.

246047-72-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,246047-72-3 ,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

Grubbs second generation catalyst (100 mg, 0.117 mmol), 2-[(2,6-dimethylphenylimino)methyl]phenol (pKa: 8.85+/- 0.30) (0.117 mmol), silver (I) carbonate (16.27 mg, 0.058 mmol), and THF (2 ml) were reacted at room temperature during 2 h. The solvent was evaporated and crude reaction product purified on a chromatography column to give an orange-brown complex. Yield 22%.

The chemical industry reduces the impact on the environment during synthesis,246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Telene SAS; EP2151446; (2010); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

Example 4 – Synthesis of the complex 3 according to the invention The commercially available complex G (1.0 g, 1.18 mmol) was placed in a flask, to which methylene chloride was added (24 ml). This was followed by adding the compound of the formula: (141 mg, 1.17 mmol) and tricyclohexylphosphine (330 mg, 1.18 mmol). The resulting solution was stirred at a temperature of 40C for 5 hours. The reaction mixture was introduced at the top of a chromatographic column packed with silica gel (eluent: ethyl acetate/cyclohexane, 0 to 10 vol. ). After evaporating the solvents, the complex 3 was obtained as a green solid (797 mg, 82% yield). The NMR data are consistent with Example 3.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, 246047-72-3

Reference£º
Patent; APEIRON SYNTHESIS S.A.; SKOWERSKI, Krzysztof; BIENIEK, Micha?; WO2014/16422; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, and cas is 246047-72-3, its synthesis route is as follows.

Example 5 – Synthesis of the complex 4 according to the invention The commercially available complex G (200 mg, 0.24 mmol) was placed in a flask, to which methylene chloride was added (6 ml). This was followed by adding the compound of the formula: (78 mg, 0.47 mmol) and tricyclohexylphosphine (132 mg, 0.47 mmol). The resulting solution was stirred at a temperature of 40C for 1 hour. The reaction mixture was introduced at the top of a chromatographic column packed with silica gel (eluent: ethyl acetate/cyclohexane, 0 to 10 vol.%). After evaporating the solvents, the complex 4 was obtained as a brown solid (104 mg, 50% yield). 4 H NMR (500 MHz, CD2CI2) delta ppm: 16.42 (s, 1H), 8.00 (dd, J = 9.3, 2.7 Hz, 1H), 7.53 (d, J = 2.1 Hz, 1H), 7.12 (s, 1H), 7.06 (s, 2H), 6.69 (d, J = 9.3 Hz, 1H), 6.22 (s, 1H), 4.07- 4.03 (m, 1H), 3.88-3.77 (m, 2H), 3.73-3.67 (m, 1H) , 2.64 (s, 3H), 2.56 (s, 3H), 2.51 (s, 3H), 2.39 (s, 3H), 2.27 (s, 3H), 1.64-1.50 (m, 13H), 1.46 (m, 3H), 1.12-0.75 (m, 20H). 13C NMR: (125 MHz, CD2CI2) delta ppm: 282.23 (d), 220.27, 219.73, 184.63 (d), 145.82, 139.23 (d), 139.08, 138.89, 137.46, 136.76, 136.69, 134.24, 134.00, 130.55, 130.36, 129.41 (d), 125.78, 117.59, 115.27, 52.14 (d), 51.63 (d), 34.52, 32.77, 32.64, 29.40, 28.91, 28.00 (m), 26.90 (d), 22.73, 21.34, 21.01, 19.41, 18.63, 18.53, 17.10, 14.21.

246047-72-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,246047-72-3 ,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; APEIRON SYNTHESIS S.A.; SKOWERSKI, Krzysztof; BIENIEK, Micha?; WO2014/16422; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, and cas is 246047-72-3, its synthesis route is as follows.

In order to confirm by a series of compounds obtained by reaction of, reference the known method for the synthesis of beta, beta-di fluorophenyl ethylene. Furthermore, the known method of the reference (valeant literature 3, the following formula) synthesis of the (1,3-II Yl -4,5- dihydro imidazole -2-type methylene) (three ring hexyl phosphine ) methylene dichloride difluoromethane ruthenium. The following shows the results of these evaluations. These as spectrum standard, because of the above-mentioned of the internal liquid of the (mixture) is consistent with the NMR spectrum, so that the beta, beta-difluoro styrene and (1,3-II Yl -4,5- dihydro imidazole -2-type methylene) (three ring hexyl phosphine ) difluoro methylene b chlorize the generating.

246047-72-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,246047-72-3 ,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Asahi Glass Co., Ltd.; YUSUKE, TAKAHIRA; (43 pag.)CN105517982; (2016); A;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI