246047-72-3| Page 116 of 122 | Ruthenium catalysts

New learning discoveries about 246047-72-3

246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various fields.

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A suspension of 218 mg (0.26 mmol) of [RuCl2(PCy3) (ImH2Mes)(phenylmethy- lene)], 26 mg (0.26 mmol) copper chloride and 49 mg (0.29 mmol) 2-methyl-8-vinyl- quinoline in 17 ml methylene chloride was stirred at 300C for 90 min. The reaction mixture was evaporated to dryness and the isolated crude product purified by silica gel chromatography (hexane / ethyl acetat 7:3) and finally digested in 15 ml hexane at room temperature for 30 min to yield 157 mg (96%) of the title compound as green crystals. MS: 632.9 (M+). 1H-NMR (300 MHz, C6D6): 2.15 (s, 3H); 2.29 (s, 6H); 2.64 (s, 12H); 3.49 (s, 4H); 6.30 (d, J=8.4Hz, IH); 6.80 (t, J=7.3Hz, IH); 6.98 (s, 4H); 7.10 (d, J=8.4Hz, IH); 7.40 (d, J=8.1Hz, IH); 7.52 (d, J=7.0Hz, IH), 17.15-17.32 (br, IH). Anal, calcd. for C32H35N3Cl2Ru: C, 60.66; H, 5.57; N, 6.63; Cl, 11.19. Found: C, 60.33; H, 5.58; N, 6.27; Cl, 10.90., 246047-72-3

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; WO2008/644; (2008); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Downstream synthetic route of 246047-72-3

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

246047-72-3, A suspension of 1.50 g (1.77 mmol) of [RuCl2(PCy3)(ImH2Mes)(phenylmethylene)] (commercially available from Sigma- Aldrich Inc., St. Louis, USA), 0.19 g (1.94 mmol) of copper chloride and 0.51 g (1.94 mmol) of N,N-diethyl-2-[((E,Z)-2-propenyl)-phenoxy]- propionamide as a 4: 1 mixture of E/Z-isomers in 1 10 ml of dichloromethane was stirred for 40 min at 400C. The reaction mixture was evaporated to dryness at 400C/ 10 mbar. The crude title product was purified by repeated digestion with ethylacetate / pentane / tetrahydrofuran to yield 0.73 g (58%) of the title compound as a green crystalline solid.MS: 711.2 (M+). Anal, calcd. for C35H45Cl2N3O2Ru: C, 59.06; H, 6.37; N, 5.90; Cl, 9.96. Found: C, 58.56; H, 6.44; N, 5.23; Cl, 9.86.Crystals of the title compound suitable for X-ray crystal structure analysis were grown by vapor diffusion of pentane into a solution of 20 mg of [RuCl2(=CH(o- OCH(Me)CONEt2)Ph)(ImH2MeS)] in 2 ml of tetrahydrofuran at room temperature.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; WO2009/124853; (2009); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Application of 246047-72-3

As the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

A common heterocyclic compound, the ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,cas is 246047-72-3, mainly used in chemical industry, its synthesis route is as follows.,246047-72-3

After a 50 mL two-necked flask was replaced by argon, the ligand 5a (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with an argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was completed, silica gel was added to the filtrate to produce sand. The crude product was obtained by silica gel column chromatography, and then washed with methanol or pentane-DCM to obtain yellow-green solid product 6a in a yield of 79%.

As the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Brief introduction of 246047-72-3

As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

After a 50 mL two-necked flask was purged with argon, the ligands 5 s (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was completed, silica gel was added to the filtrate to prepare a sand product. The crude product was obtained by silica gel column chromatography, and then washed with methanol or pentane-DCM to obtain a yellow-green solid product 6s in a yield of 37%., 246047-72-3

As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Some tips on 246047-72-3

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Grubbs’ second generation catalyst (226 mg, 1 eq) and copper (I) chloride (26 mg, 1 eq) were charged in a Schlenk tube and degassed. A degassed solution of compound C4 (26 mg, 21 eq.) in anhydrous dichloromethane (50 mL) was transferred via cannula to the solid. The mixture was heated at 30 C. for 60 min. The solvent was removed in vacuo and the residue was purified by chromatography on silica gel (PE/EA) to afford compound C5 (202 mg) as a green solid in 100% yield. 31P NMR (CDCl3, 161.8 MHz) delta (ppm) 22.88 (s, 1P); HRMS (ES+): m/z=764 (M+H+)., 246047-72-3

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Idenix Pharmaceuticals, Inc.; Parsy, Christophe Claude; Alexandre, Francois-Rene; Bonnaterre, Florence Marie-Emilie; Surleraux, Dominique; US9115095; (2015); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

New learning discoveries about 246047-72-3

246047-72-3, 246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various fields.

After a 50 mL two-necked flask was replaced by argon, the ligand 3 cu (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with an argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to prepare a sand product. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to give 4cu green solid product in a yield of 65%.

Simple exploration of 246047-72-3

246047-72-3, The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid.

246047-72-3, The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Application of 246047-72-3

As the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

Complex 1(2.0 grams) was dissolved in toluene (10 mL), and 4-phenylpyridine (1.50 grams, 4 mol equivalents) was added. The reaction flask was purged with argon and the reaction mixture was stirred for approximately 12 hours at about 20 C. to about 25 C. during which time a color change from dark purple to dark green was observed. The reaction mixture was transferred into 75 mL of cold (about 0 C.) pentane, and a dark green solid precipitated. The precipitate was filtered, washed with 4¡Á20 mL of cold pentane, and dried under vacuum to afford (IMesH2)(C11H9N)2(Cl)2RuCHPh 13 as a dark green powder (2.0 grams, 97% yield). 1H NMR (500 MHz, CD2Cl2): delta19.23 (s, 1H, CHPh), 8.74 (br. s, 2H, pyridine), 7.91 (br. s, 2H, pyridine), 7.70-7.08 (multiple peaks, 19H, ortho CH, para CH, meta CH, pyridine), 6.93 (br. S, 2H, Mes CH) 6.79 (br. s, 2H, Mes CH), 4.05 (br. s, 4H, NCH2CH2N), 2.62-2.29 (multiple peaks, 18H, Mes CH3).

As the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

Reference£º
Patent; Grubbs, Robert H.; Morgan, John P.; Love, Jennifer A.; Trnka, Tina M.; US2003/236427; (2003); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Analyzing the synthesis route of 246047-72-3

With the synthetic route has been constantly updated, we look forward to future research findings about (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,belong ruthenium-catalysts compound

As a common heterocyclic compound, it belong ruthenium-catalysts compound,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,246047-72-3,Molecular formula: C46H65Cl2N2PRu,mainly used in chemical industry, its synthesis route is as follows.,246047-72-3

A suspension of 1.50 g (1.77 mmol) of [RuCl2(PCy3)(ImH2Mes)(phenylmethylene)] (commercially available from Sigma- Aldrich Inc., St. Louis, USA), 0.19 g (1.94 mmol) of copper chloride and 0.51 g (1.94 mmol) of N,N-diethyl-2-[((E,Z)-2-propenyl)-phenoxy]- propionamide as a 4: 1 mixture of E/Z-isomers in 1 10 ml of dichloromethane was stirred for 40 min at 400C. The reaction mixture was evaporated to dryness at 400C/ 10 mbar. The crude title product was purified by repeated digestion with ethylacetate / pentane / tetrahydrofuran to yield 0.73 g (58%) of the title compound as a green crystalline solid.MS: 711.2 (M+). Anal, calcd. for C35H45Cl2N3O2Ru: C, 59.06; H, 6.37; N, 5.90; Cl, 9.96. Found: C, 58.56; H, 6.44; N, 5.23; Cl, 9.86.Crystals of the title compound suitable for X-ray crystal structure analysis were grown by vapor diffusion of pentane into a solution of 20 mg of [RuCl2(=CH(o- OCH(Me)CONEt2)Ph)(ImH2MeS)] in 2 ml of tetrahydrofuran at room temperature.

Analyzing the synthesis route of 246047-72-3

A 50 mL two-necked flask was purged with argon and the ligands 3cy (10mmol), CuCl (30mmol, 3eq) and 30mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to produce sand after filtration. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain 4cy green solid product in a yield of 70%.