Category: 301224-40-8

The ruthenium-catalysts compound, cas is 301224-40-8 name is (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, mainly used in chemical industry, its synthesis route is as follows.,301224-40-8

General procedure: A mixture of fluorinated acid silver salt 6 (2.2eq.) and dichlororuthenium(IV) complex 5 (1.0eq.) was first dried under vacuum (13Pa) at room temperature for 1h. Dry dichloromethane (5mL) was added and the resulting mixture was stirred at room temperature for 3h in the dark. The solids were filtered off and washed with dry dichloromethane (2mL). Evaporation of the solvent afforded the product 7-9.

With the rapid development of chemical substances, we look forward to future research findings about 301224-40-8

Reference£º
Article; Babun?k, Mario; ?im?nek, Ond?ej; Ho?ek, Jan; Ryba?kova, Marketa; Cva?ka, Josef; B?ezinova, Anna; Kvi?ala, Jaroslav; Journal of Fluorine Chemistry; vol. 161; (2014); p. 66 – 75;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.301224-40-8,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,as a common compound, the synthetic route is as follows.,301224-40-8

General procedure: A mixture of fluorinated acid silver salt 6 (2.2eq.) and dichlororuthenium(IV) complex 5 (1.0eq.) was first dried under vacuum (13Pa) at room temperature for 1h. Dry dichloromethane (5mL) was added and the resulting mixture was stirred at room temperature for 3h in the dark. The solids were filtered off and washed with dry dichloromethane (2mL). Evaporation of the solvent afforded the product 7-9.

As the paragraph descriping shows that 301224-40-8 is playing an increasingly important role.

Reference£º
Article; Babun?k, Mario; ?im?nek, Ond?ej; Ho?ek, Jan; Ryba?kova, Marketa; Cva?ka, Josef; B?ezinova, Anna; Kvi?ala, Jaroslav; Journal of Fluorine Chemistry; vol. 161; (2014); p. 66 – 75;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.301224-40-8,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,as a common compound, the synthetic route is as follows.,301224-40-8

Potassium 2,4,6-triphenylthiophenolate 2d (53 mg, 0.14 mmol) was transferred to a 25 mL Schlenk flask, followed by addition of 5 mL of THF under argon, and the mixture was stirred vigorously and heated at 55 C. Hoveyda-Grubbs second generation catalyst (82 mg, 0.13 mmol) dissolved in toluene (1 mL) was then added, and the mixture stirred at 55 C. for 2.5 h. The solvents were then removed in vacuo, and the product was redissolved in 6 mL Et2O. Following filtration, 3 mL of hexane was added, and the mixture cooled to -40 C., causing precipitation of impurities. After allowing solids to settle, the solution was filtrated, and the solvents removed in vacuo to yield the crude 4d complex as a green powder (50.7 mg, 42%). 1H NMR (400.13 MHz, C6D6): delta=14.50 (s, 1H), 7.80 (d, J=6.4 Hz, 2H), 7.47 (t, J=6.7 Hz, 2H), 7.42-7.34 (m, 2H), 7.31-7.21 (m, 3H), 7.11 (t, J=7.2 Hz, 3H), 7.08-7.00 (m, 3H), 6.99-6.90 (m, 3H), 6.87 (s, 2H), 6.79-6.60 (m, 4H), 6.15 (d, J=8.2 Hz, 2H), 4.15 (sept, J=6.1 Hz, 1H), 3.38-3.20 (m, 4H), 2.47 (s, 6H), 2.38 (s, 6H), 2.29 (s, 6H), 1.15 (d, J=6.1 Hz, 3H), 0.59 (d, J=6.1 Hz, 3H). (0132) 13C NMR (100.6 MHz, CD2Cl2): delta=276.55, 210.42, 153.68, 146.72, 138.75, 138.16, 131.23, 129.58, 129.12, 128.97, 128.75, 128.31, 127.87, 127.77, 127.50, 127.23, 127.01, 125.83, 122.65, 121.72, 113.38, 76, 15, 53, 87, 51, 98, 21.54, 21.25, 20.83, 19.92, 19.04. MS (DART), m/z: 928.27512 (M+H)+; calc. for C55H56OClN2SRu: 928.27671.

As the paragraph descriping shows that 301224-40-8 is playing an increasingly important role.

Reference£º
Patent; Bergen Teknologioverforing AS; Jensen, Vidar R.; Occhipinti, Giovanni; Hansen, Frederick Rosberg; US8716488; (2014); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belong ruthenium-catalysts compound,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,301224-40-8,Molecular formula: C31H38Cl2N2ORu,mainly used in chemical industry, its synthesis route is as follows.,301224-40-8

In a Schlenk flask, (H2IMes)Cl2Ru(CH-o-OiPrC6H4) (106 mg, 0.169 mmol, 1 eq) was dissolved in degassed CH2Cl2 (18 mL). 5,7-Dichloro-8-hydroxyquinoline (707 mg, 3.303 mmol, 19 eq) and Cs2CO3 (150 mg, 0.461 mmol, 16 eq) were added. The reaction mixture was stirred in a Schlenk flask under argon atmosphere overnight. (0099) The insoluble residue was filtered over celite. According to a TLC (CH/EE 5:1) two derivatives were formed. The products were separated via column chromatography (CH/EE 5:1) and fully characterized by NMR and crystal structure analysis. Yield=83% (46.5 mg 3 and 91 mg 4). (0100) 3: 1H-NMR (delta, 20 C., CDCl3, 300 MHz): 19.10 (s, 1H, Ru?CH), 8.09 (d J=4.04, 1H, CHhq), 7.95 (d J=8.56; j=1.43, 1H, CHhq), 7.68 (d J=8.43 j=1.30, 1H, CHPhq), 7.49 (s, 1H, CHhq), 7.17 (s, 1H, CHhq), 7.05 (m, 2H, CHhq), 6.56 (d J=8.04, 1H, CHhq), 6.48 (s, 2H, CHmes), 6.43 6,39 (?, 2H, CHph), 6.14 (s, 2H, CHmes), 6.06 (2H, CHhq+ph), 3.97 (5H, CH2+CHisoprop), 2.45 (s, 6H), 2.27 (s, 6H), 1.90 (s, 6H, CH31, 1?, 2, 2?, 3, 3?), 1.43 (d, 3H, CH3isoprop), 1.05 (d, 3H, CH3isoprop). (0101) 3: 13C-NMR (delta, 20 C., CDCl3, 75 MHz): 338.6 (1C, Ru?CH), 227.6 (1C, Ru-C), 162.6, 161.3, 149.7, 149.4, 149.0, 144.2, 143.2, 142.4, 142.3, 138.1 (Cq), 136.9 (Cq), 136.6 (Cq), 135.8 (Cq), 132.3 (CH), 131.7 (CH), 129.3 (CH), 129.2 (CH), 128.7, 127.7 (CH), 126.2, 125.8, 125.7, 122.2 (CH), 121.6 (CH), 121.0 (CH), 119.5 (CH), 118.9, 112.0, 109.2, 76.2 (1C, CHisoprop), 51.6 (2C, CH2-N), 23.1 (1C, CH3isoprop), 21.5 (1C, CH3isoprop), 20.8, 18.8, 18.5 (2C, CH3mes 7, 7?, 8, 8?, 9, 9?). (0102) 4: 1H-NMR (delta, 20 C., CDCl3, 300 MHz): 18.23 (bs, 1H, Ru?CH), 9.00 (d j=4.67 Hz, 1H, CHhq 1), 8.09 (d J=8.56 Hz, 1H, CHhq 3), 7.83 (d J=8.30 Hz, 1H, CHhq 3) 7.57 (s, 1H, CHhq 4 or 4), 7.12 (s, 1H, CHhq 4 or 4), 7.06 (q, 1H, CHhq 2), 6.94 (t, 1h; CHph 3 or 4), 6.59 (s, 2H, CHmes 3+3? or 5+5?), 6.39 (d, 1H, CHph 2 or 5), 6.26 (s, 2H, CHmes 3+3? or 5+5?), (d, 1H, CHph 2 or 5), (t, 1H, Chhq 2), 5.98 (t, 1H, CHph 3 or 4), 5.32 (d j=4.54 Hz, 1H, CHhq 1), 4.54 (m, 1H, CHisoprop), 3.92 (q, 4H, CH2mes), 2.57 (s, 6H), 2.04 (s, 6H), 1.91 (s, 6H, CH3mes 7, 7?, 8, 8?, 9, 9?), 1.53 (d, 3H, CH3isoprop), 1.31 (d, 3H, CH3isoprop). (0103) 13C-NMR (delta, 20 C., CDCl3, 75 MHz): Ru?C not observed, 209.5 (1C, Ru-C), 166.4 (Cq), 160.9 (Cq), 147.7 (Cq), 146.7 (Cq), 147.1 (Cq), 146.7 (Cq), 164.5 (CH), 146.5 (CH), 144.9 (Cq), 141.2 (CH), 137.1 (Cq), 137.0 (Cq), 136.7 (Cq), 136.5 (Cq), 119.3 (Cq), 125.8 (Cq), 132.7 (CH), 132.2 (CH), 129.2 (CH), 129.1 (2C, CH), 129.0 (CH), 128.6 (CH), 127.9 (CH), 126.4 (Cq), 120.7 (CH), 120.1 (CH), 119.7 (CH), 118.0 (Cq), 111.3 (Cq), 110.5 (CH), 106.4 (Cq), 68.7 (1C, CHisoprop) 51.7 (2C, CH2), 22.7, 22.3 (2C, CH3isoprop), 20.9, 18.9, 18.1 (6C, CH3mes 7, 7?, 8, 8?, 9?). (0104) Even if both of the catalysts possess two 5,7-dichloro-8-hydroxyquinolines, they show different NMR patterns. The different structures were revealed by X-ray diffraction. The crystals for the X-ray diffraction measurement were obtained by slow diffusion of Et2O in a saturated solution of CH2Cl2. The two derivatives exhibit a different geometry considering the 8-quinolinolate substituents. In derivative 3, the oxygen atoms of the two quinolinolates are orientated trans to each other, while in derivative 4 these trans positions are occupied by an oxygen and a nitrogen atom of the two different quinolinolates.

With the synthetic route has been constantly updated, we look forward to future research findings about (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,belong ruthenium-catalysts compound

Reference£º
Patent; Technische Universitaet Graz; Slugovc, Christian; Wappel, Julia; US8981024; (2015); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO480,mainly used in chemical industry, its synthesis route is as follows.,301224-40-8

Potassium 2,4,6-triphenylthiophenolate 2d (53 mg, 0.14 mmol) was transferred to a 25 mL Schlenk flask, followed by addition of 5 mL of THF under argon, and the mixture was stirred vigorously and heated at 55 C. Hoveyda-Grubbs second generation catalyst (82 mg, 0.13 mmol) dissolved in toluene (1 mL) was then added, and the mixture stirred at 55 C. for 2.5 h. The solvents were then removed in vacuo, and the product was redissolved in 6 mL Et2O. Following filtration, 3 mL of hexane was added, and the mixture cooled to -40 C., causing precipitation of impurities. After allowing solids to settle, the solution was filtrated, and the solvents removed in vacuo to yield the crude 4d complex as a green powder (50.7 mg, 42%). 1H NMR (400.13 MHz, C6D6): delta=14.50 (s, 1H), 7.80 (d, J=6.4 Hz, 2H), 7.47 (t, J=6.7 Hz, 2H), 7.42-7.34 (m, 2H), 7.31-7.21 (m, 3H), 7.11 (t, J=7.2 Hz, 3H), 7.08-7.00 (m, 3H), 6.99-6.90 (m, 3H), 6.87 (s, 2H), 6.79-6.60 (m, 4H), 6.15 (d, J=8.2 Hz, 2H), 4.15 (sept, J=6.1 Hz, 1H), 3.38-3.20 (m, 4H), 2.47 (s, 6H), 2.38 (s, 6H), 2.29 (s, 6H), 1.15 (d, J=6.1 Hz, 3H), 0.59 (d, J=6.1 Hz, 3H). (0132) 13C NMR (100.6 MHz, CD2Cl2): delta=276.55, 210.42, 153.68, 146.72, 138.75, 138.16, 131.23, 129.58, 129.12, 128.97, 128.75, 128.31, 127.87, 127.77, 127.50, 127.23, 127.01, 125.83, 122.65, 121.72, 113.38, 76, 15, 53, 87, 51, 98, 21.54, 21.25, 20.83, 19.92, 19.04. MS (DART), m/z: 928.27512 (M+H)+; calc. for C55H56OClN2SRu: 928.27671.

With the synthetic route has been constantly updated, we look forward to future research findings about (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,belong ruthenium-catalysts compound

Reference£º
Patent; Bergen Teknologioverforing AS; Jensen, Vidar R.; Occhipinti, Giovanni; Hansen, Frederick Rosberg; US8716488; (2014); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, cas is 301224-40-8, it is a common heterocyclic compound, the ruthenium-catalysts compound, its synthesis route is as follows.

cis-RuC12(slMes)(CHC6H4O1-Pr)(Ph2P(OMe)), cis-C843: C627 (35.0 g, 56 mmol) was dissolved in degassed CH2C12 (2000 mL) in an 1-neck round-bottomed flask under nitrogen, to which methyl diphenylphosphinite (50 g, 231 mmol) was syringed. The flask was connected to a Friedrich condenser, which was in turn attached to vacuum/nitrogen line. The mixture was degassed by vacuum/nitrogen 3-times. An oil bath was used to heat the flask. The oil bath temperature was kept at 50 C for 40 h and then cooled to room temperature. The solvent was removed under high vacuum. The residue was dissolved in a minimum amount of CH2C12 and loaded on top of Si02 gel column (4 x 3 in, D x H) and eluted with CH2C12. A red band which stuck on column was rinsed down by methanol. The solvent was removed by rotary evaporator and a green solid was obtained. The solid was further purified by recrystallization from CH2C12 /Hexanes. Yield: 15 g (32%). ?H NMR (400 MHz, C6D6, ppm): oe 16.45 (d, J = 24 Hz, RuCH, 1H), 10.11 (dd, J = 8 Hz, J = 2Hz, 1H), 7.55 (t, J = 9Hz, 2H), 7.20 (ddd, J = 9Hz, J = 7 Hz, J = 2 Hz, 1H), 7.000 (m, 3H), 6.87 (dt, J = 2 Hz, J = 8 Hz, 2H), 6.79 (t, J = 8 Hz, 1H), 6.75 – 6.65 (m, 3H), 6.61 (d, J = 10Hz), 6.20 (m, 2H), 4.11 (septet, J = 6Hz, -OCHIVIe2, 1H), 3.50-3.06 (m, 4H),3.38 (d, J = 10Hz, -OCH3, 3H), 2.92 (s, 3H), 2.51 (s, 3H), 2.45 (s, 3H), 2.33 (s, 3H), 1.95 (s, 3H),1.91 (s, 3H), 1.25 (d, J = 6Hz, 3H, OCH(CH3)(CH3), 3H), 0.97 (d, J = 6Hz, 3H, OCH(CH3)(CH3), 3H). 3?P NMR (162 MHz, C6D6, ppm): oe 140.9 (b).

As the rapid development of chemical substances, we look forward to future research findings about 301224-40-8

Reference£º
Patent; MATERIA, INC.; GIARDELLO, Michael, A.; TRIMMER, Mark, S.; WANG, Li-Sheng; DUFFY, Noah, H.; JOHNS, Adam, M.; RODAK, Nicholas, J.; FIAMENGO, Bryan, A.; PHILLIPS, John, H.; (127 pag.)WO2017/53690; (2017); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

A common heterocyclic compound, the ruthenium-catalysts compound, name is (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,cas is 301224-40-8, mainly used in chemical industry, its synthesis route is as follows.

trans-RuC12(slMes)(CHC6H4O1-Pr)(Ph2P(OMe)), trans-C843: C627 (1 .0 g,1.59 mmol) was dissolved in degassed DCM (25 mL) in an 1-neck round-bottomed flask with a magnetic stir bar under nitrogen, to which methyl diphenylphosphinite (0.379g, 1.75 mmol) was added. The flask was capped with a gas adaptor. The mixture was degassed via N2/vacuum cycle 3-times. After 1 h of stirring at room temperature, the solvent was removed under high vacuum. Degassed methanol (75mL) was added to the residue. A purple solid was collected by a frit funnel with vacuum filtration. The solid was further dried under high vacuum for 16h. Yield: 0.7 g (69%). ?H NIVIR (400 MHz, CDC13, ppm): oe 19.60 (s, RuCH, 1H), 7.95 (dd, J = 8 Hz, J = 2 Hz, 1H), 7.22 – 6.80 (b, 13H), 6.66 (b, 1H), 6.44 (d, J = 8 Hz, 1H), 6.25 (t, J = 8 Hz, 1H), 6.02 (b, 1H), 4.42 (septet, J = 6 Hz, OCHIVIe2, 1H), 4.13 – 3.78 (b, NCH2CH2N, 4H), 3.11 (d, J = 7 Hz, OCH3, 3H), 2.72 (b, 3H), 2.58 (b, 3H), 2.52 (b, 3H), 2.30 (s, 3H), 2.03 (b, 3H), 1.85 (s, 3H), 1.49 (b, 3H), 1.29 (b, 3H). 3?P NIVIR (162 IVIHz, CDC13): oe 135.7 (s).

As the rapid development of chemical substances, we look forward to future research findings about 301224-40-8

Reference£º
Patent; MATERIA, INC.; GIARDELLO, Michael, A.; TRIMMER, Mark, S.; WANG, Li-Sheng; DUFFY, Noah, H.; JOHNS, Adam, M.; RODAK, Nicholas, J.; FIAMENGO, Bryan, A.; PHILLIPS, John, H.; (127 pag.)WO2017/53690; (2017); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belong ruthenium-catalysts compound,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,301224-40-8,Molecular formula: C31H38Cl2N2ORu,mainly used in chemical industry, its synthesis route is as follows.

Take Grubbs-HoveydaII catalyst (464.0mg, 0.74mmol),Compound II (201.0 mg, 0.9 mmol,) prepared in Example 1 was placed in a 25 mL round bottom flask.Add 15 mL of dry THF and stir at 800 r / min at room temperature for 30 min.After the reaction was completed, the solvent was dried with a vacuum pump to obtain a brown-red solid.Add n-hexane to the solid and stir thoroughly. At this time, the color of n-hexane will turn red. Centrifuge the mixture, discard the liquid, and dry the solid.Compound III (385 mg, yield: 70.6%) was obtained as a brown solid powder.

With the synthetic route has been constantly updated, we look forward to future research findings about (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,belong ruthenium-catalysts compound

Reference£º
Patent; Jilin Chemical College; Yu Xiaobo; Geng Shudong; Liu Guanchen; (14 pag.)CN110563769; (2019); A;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 301224-40-8, its synthesis route is as follows.

2.0 g of catalyst RuCl2(sIMes)(CH-o-CPrO)C6H4) (C627) (3.2 mmol) and 1.46 g of sIMes (4.8 mmol) were placed in a round bottomed flask under nitrogen, in 10 ml of anhydrous toluene. The reaction mixture was heated in a water bath at 45 C and stirred for 3 h and another 16 h at room temperature. The formed suspension was filtered and washed with MeOH. C933Bis was obtained as a light pink solid in 40% yield. Purity: 99+% by HPLC. NMR (CD2CI2): delta 20.04 (s, 1 H), 8.46 (d, J = 10 Hz, 1 H), 7.17 (t, J = 8 Hz, 1 H), 7.1 – 6.3 (b, 6 H), 6.40 (t, J = 7 Hz, 1 H), 6.21 (d, J = 8 Hz, 1 H), 6.1 – 5.7 (b, 2 H), 4.07 (septet, J = 6 Hz, 1 H), 3.7 – 3.3 (b, 8 H), 2.7 – 1.7 (b, 36 H), 1.48 (d, J = 6 Hz, 6 H). 13C NMR (CD2CI2): delta 289.16 (m, Ru=CH), 220.80, 148.12, 142.58, 139.0 – 135.0 (b, m), 134.43, 130.15 (b), 129.33, 119.53, 119.78, 70.08, 55.0 – 52.0 (b), 23.40, 21.46, 19.47, 20.0 – 18.0 (b).

With the complex challenges of chemical substances, we look forward to future research findings about (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride

Reference£º
Patent; MATERIA, INC.; WANG, Li-sheng; TRIMMER, Mark, S.; (86 pag.)WO2018/35319; (2018); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

A common heterocyclic compound, the ruthenium-catalysts compound, name is (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,cas is 301224-40-8, mainly used in chemical industry, its synthesis route is as follows.

General procedure: Hoveyda-Grubbs 2nd generation catalyst (19mg; 0.03mmol) was added to a solution of dien 7 (100mg; 0.31mmol) and styrene (2.48mmol) in dichloroethane (5mL). The reaction mixture was heated at 80C for 5h. Then, another portion of H-G catalyst (19mg; 0.03mmol) was added and the reaction mixture was heated at 80C for additional 5h. Then, the solvent was evaporated and crude solid was purified by column chromatography on silica gel (mobile phase – 3% ethyl acetate in cyclohexane, Rf of products 0.18-0.25). In some cases, stated in each experiment, HPLC had to be used due to very close retention time of product and starting material (mobile phase – 0.5% ethyl acetate in cyclohexane).

As the rapid development of chemical substances, we look forward to future research findings about 301224-40-8

Reference£º
Article; Korinkova, Petra; Bazgier, Vaclav; Oklestkova, Jana; Rarova, Lucie; Strnad, Miroslav; Kvasnica, Miroslav; Steroids; vol. 127; (2017); p. 46 – 55;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI