Category: ruthenium-catalysts

Name is (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 301224-40-8, its synthesis route is as follows.

Potassium 2,4,6-triphenylthiophenolate 2d (53 mg, 0.14 mmol) was transferred to a 25 mL Schlenk flask, followed by addition of 5 mL of THF under argon, and the mixture was stirred vigorously and heated at 55 C. Hoveyda-Grubbs second generation catalyst (82 mg, 0.13 mmol) dissolved in toluene (1 mL) was then added, and the mixture stirred at 55 C. for 2.5 h. The solvents were then removed in vacuo, and the product was redissolved in 6 mL Et2O. Following filtration, 3 mL of hexane was added, and the mixture cooled to -40 C., causing precipitation of impurities. After allowing solids to settle, the solution was filtrated, and the solvents removed in vacuo to yield the crude 4d complex as a green powder (50.7 mg, 42%). 1H NMR (400.13 MHz, C6D6): delta=14.50 (s, 1H), 7.80 (d, J=6.4 Hz, 2H), 7.47 (t, J=6.7 Hz, 2H), 7.42-7.34 (m, 2H), 7.31-7.21 (m, 3H), 7.11 (t, J=7.2 Hz, 3H), 7.08-7.00 (m, 3H), 6.99-6.90 (m, 3H), 6.87 (s, 2H), 6.79-6.60 (m, 4H), 6.15 (d, J=8.2 Hz, 2H), 4.15 (sept, J=6.1 Hz, 1H), 3.38-3.20 (m, 4H), 2.47 (s, 6H), 2.38 (s, 6H), 2.29 (s, 6H), 1.15 (d, J=6.1 Hz, 3H), 0.59 (d, J=6.1 Hz, 3H). (0132) 13C NMR (100.6 MHz, CD2Cl2): delta=276.55, 210.42, 153.68, 146.72, 138.75, 138.16, 131.23, 129.58, 129.12, 128.97, 128.75, 128.31, 127.87, 127.77, 127.50, 127.23, 127.01, 125.83, 122.65, 121.72, 113.38, 76, 15, 53, 87, 51, 98, 21.54, 21.25, 20.83, 19.92, 19.04. MS (DART), m/z: 928.27512 (M+H)+; calc. for C55H56OClN2SRu: 928.27671.

301224-40-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,301224-40-8 ,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Bergen Teknologioverforing AS; Jensen, Vidar R.; Occhipinti, Giovanni; Hansen, Frederick Rosberg; US8716488; (2014); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

A 50 ml three-necked flask equipped with a stirring reflux device was charged with 1 mmol of 2-diphenylphosphineaniline,1.1 mmol of p-methylbenzyl alcohol, 1 mmol of 2-diphenylphosphinophenyl ether, 1 mmol of RuCl2 (PPh3) 3, 1.4 mmol of triethylamine and 20 ml of dioxane were added and the mixture was heated at 110 C for 12 h under a nitrogen atmosphere.After cooling and filtering, the resulting solid was recrystallized from a mixed solvent of CH 2 Cl 2 and petroleum ether to give product 14 in a yield of 86%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Dichlorotris(triphenylphosphino)ruthenium (II), 15529-49-4

Reference£º
Patent; Luoyang Normal College; Li Hongmei; Xu Chen; Zu Enpu; Xiao Zhiqiang; Han Xin; (12 pag.)CN104804048; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 246047-72-3, its synthesis route is as follows.

General procedure: The product was synthesized using in-situ generated Grubbs-Hoeyda 2nd generation catalyst.Therefore Grubbs 2nd generation catalyst (0.1 mmol, 0.02 equiv.) was dissolved in drydichloromethane (5 mL), 1-Isopropoxy-2-vinylbenzene (0.1 mmol, 0.02 equiv.) and copper(I)chloride(0.1 mmol, 0.02 equiv.) were added and the reaction mixture was stirred at reflux for 45 min until thecolour turned green. After cooling to room temperature VCP XX (5 mmol, 1 equiv.) and methylacrylate (30 mmol, 6 equiv.) were added and the reaction mixture was stirred at reflux for 16 h, afterwhich additional methyl acrylate (10 mmol, 2 equiv.) was added and stirred for another 7 h at reflux.The product was obtained via column chromatography on silica gel (5:1 petroleum ether/ethylacetate) as a white powder

246047-72-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,246047-72-3 ,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Pursley, Dominik; Plietker, Bernd; Synlett; vol. 25; 16; (2014); p. 2316 – 2318;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, and cas is 246047-72-3, its synthesis route is as follows.

General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid.

246047-72-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,246047-72-3 ,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Diphosphine ligand (2.0 mmol) was dissolved in 10 mL of dichloromethane and the solution was added dropwise to a stirred solution of RuCl2(PPh3)3 (1.0 mmol) in 10 mL of dichloromethane. The reaction mixture was stirred approximately for 50 min at room temperature. The brown solution was filtered to remove the insoluble impurities. The solvent was reduced by a vacuum and the product was then precipitated by adding n-hexane. The yellow solid was filtered and washed three times with 20 mL of diethyl ether.

The chemical industry reduces the impact on the environment during synthesis,15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),I believe this compound will play a more active role in future production and life.

Reference£º
Article; Al-Noaimi, Mousa; Warad, Ismail; Abdel-Rahman, Obadah S.; Awwadi, Firas F.; Haddad, Salim F.; Hadda, Taibi B.; Polyhedron; vol. 62; (2013); p. 110 – 119;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Diphosphine ligand (2.0 mmol) was dissolved in 10 mL of dichloromethane and the solution was added dropwise to a stirred solution of RuCl2(PPh3)3 (1.0 mmol) in 10 mL of dichloromethane. The reaction mixture was stirred approximately for 50 min at room temperature. The brown solution was filtered to remove the insoluble impurities. The solvent was reduced by a vacuum and the product was then precipitated by adding n-hexane. The yellow solid was filtered and washed three times with 20 mL of diethyl ether.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Dichlorotris(triphenylphosphino)ruthenium (II), 15529-49-4

Reference£º
Article; Al-Noaimi, Mousa; Warad, Ismail; Abdel-Rahman, Obadah S.; Awwadi, Firas F.; Haddad, Salim F.; Hadda, Taibi B.; Polyhedron; vol. 62; (2013); p. 110 – 119;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 15529-49-4, name is Dichlorotris(triphenylphosphino)ruthenium (II) This compound has unique chemical properties. The synthetic route is as follows. 15529-49-4

To a solution of N,O-LH-Cl (930?mg, 4.0?mmol) in THF (20?mL) was added [Ru(PPh3)3Cl2] (868?mg, 2.0?mmol), which was then stirred under N2 for 15?min. Triethylamine (Et3N) (404?mg, 4.0?mmol) was introduced, and the reaction mixture was stirred overnight at room temperature, during which the color of solution changed from brown to dark green. After removal of solvents in vacuo, the residue was extracted with CH2Cl2 (5?mL?*?2) and the solution was filtered. The filtrate was layered with Et2O (20?mL) at room temperature, and dark green block-shaped crystals of cis-[RuCl(PPh3)(kappa2-N,O-L-Cl)2] (1) were harvested in three days. Yield: 1187?mg, 69% (based on Ru). mueff?=?1.98?muB. IR (KBr disc, cm-1): 1592 (nuC=N), 1314 (nuC-O), 1437, 1092 and 698 (nuPPh3). MS (FAB): m/z 860 [M+], 825 [M+-Cl], 598 [M+-PPh3], 563 [Ru(kappa2-N,O-L-Cl)2]+. Anal. Calc. for C44H33N2O2Cl3PRu(%): C, 61.44; H, 3.87; N, 3.26. Found: C, 61.47; H, 3.83; N, 3.24.

With the complex challenges of chemical substances, we look forward to future research findings about 15529-49-4,belong ruthenium-catalysts compound

Reference£º
Article; Tang, Li-Hua; Wu, Fule; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 477; (2018); p. 212 – 218;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

50982-12-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.50982-12-2, Dichloro(cycloocta-1,5-diene)ruthenium(II) it is a common compound, a new synthetic route is introduced below.

A mixture of [RuCl2(COD)]n (309 mg, 1.103 mmol), PCy3 (309 mg, 1.103 mmol) and la (294 mg, 1.103 mmol) was stirred in toluene (10 ml) at 115 C for 48 h in a KONTES pressure tube. After cooling down, the brick colored precipitate was collected on a filter frit, washed with Et20 (3 x 10 ml) and vacuum dried to afford 642 mg of the crude material. To the crude material was added CH2C12 (~ 32 ml) and the obtained mixture was brought to reflux and filtered using a Whatman syringe filter (PTFE membrane, pore size 0.45 muiotaeta). Layering the obtained red-brown solution with Et20 (125 ml) afforded 327 mg (41%) of the product as a pink-brown powder after 5 days. Elem. Anal.: Calcd for C32H55Cl2N2OPRuS (718.81): C, 53.47; H, 7.71; N, 3.90%. Found: C, 53.11; H, 8.00; N, 3.86%. 31P{1H} (162 MHz, CD2C12, r.t.): delta 24.0 (s). 1H NMR (400 MHz, CD2C12, r.t.): delta 0.09 (brs, 1H), 0.92 (brs, 2H), 1.04-1.63 (m, 15H), 1.63-2.05 (m, 9H), 2.10-2.45 (brs, 3H), 2.45-2.70 (brs, 1H), 2.83-3.28 (overlapped, 7H), 3.31-3.56 (overlapped, 6H), 3.56-3.90 (overlapped, 4H), 3.98 (t, J~ 8 Hz, 1H), 5.57 (brs, NH, 1H), 7.31 (t, J~ 7 Hz, 2H), 7.38 (t, J~ 6 Hz, 1H), 8.15 (d, J~ 7 Hz, 2H). 13C{1H} selected for the coordinated NNS ligand (100.5 MHz, CD2C12, r.t.): delta 46.6 (s, 1C), 46.8 (s, 1C), 48.3 (s, 1C), 53.9 (s, 1C, overlapped with CD2C12 peak), 54.8 (s, 1C), 60.0 (s, 1C), 60.7 (s, 1C), 61.7 (s, 1C), 128.1 (s, 2Cmeta, Ph), 129.3 (s, Cpam, Ph), 134.9 (s, 2Cortho, Ph), 138.0 (s, Cipso, Ph).

With the complex challenges of chemical substances, we look forward to future research findings about 50982-12-2,belong ruthenium-catalysts compound

Reference£º
Patent; LOS ALAMOS NATIONAL SECURITY, LLC; DUB, Pavel, A.; GORDON, John, Cameron; WO2015/191505; (2015); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.246047-72-3, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium An updated downstream synthesis route of 246047-72-3 as follows., 246047-72-3

A suspension of 218 mg (0.26 mmol) of [RuCl2(PCy3) (ImH2Mes)(phenylmethy- lene)], 26 mg (0.26 mmol) copper chloride and 49 mg (0.29 mmol) 2-methyl-8-vinyl- quinoline in 17 ml methylene chloride was stirred at 300C for 90 min. The reaction mixture was evaporated to dryness and the isolated crude product purified by silica gel chromatography (hexane / ethyl acetat 7:3) and finally digested in 15 ml hexane at room temperature for 30 min to yield 157 mg (96%) of the title compound as green crystals. MS: 632.9 (M+). 1H-NMR (300 MHz, C6D6): 2.15 (s, 3H); 2.29 (s, 6H); 2.64 (s, 12H); 3.49 (s, 4H); 6.30 (d, J=8.4Hz, IH); 6.80 (t, J=7.3Hz, IH); 6.98 (s, 4H); 7.10 (d, J=8.4Hz, IH); 7.40 (d, J=8.1Hz, IH); 7.52 (d, J=7.0Hz, IH), 17.15-17.32 (br, IH). Anal, calcd. for C32H35N3Cl2Ru: C, 60.66; H, 5.57; N, 6.63; Cl, 11.19. Found: C, 60.33; H, 5.58; N, 6.27; Cl, 10.90.

With the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; WO2008/644; (2008); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.301224-40-8, (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride it is a common compound, a new synthetic route is introduced below., 301224-40-8

Potassium 2,4,6-triphenylthiophenolate 2d (53 mg, 0.14 mmol) was transferred to a 25 mL Schlenk flask, followed by addition of 5 mL of THF under argon, and the mixture was stirred vigorously and heated at 55 C. Hoveyda-Grubbs second generation catalyst (82 mg, 0.13 mmol) dissolved in toluene (1 mL) was then added, and the mixture stirred at 55 C. for 2.5 h. The solvents were then removed in vacuo, and the product was redissolved in 6 mL Et2O. Following filtration, 3 mL of hexane was added, and the mixture cooled to -40 C., causing precipitation of impurities. After allowing solids to settle, the solution was filtrated, and the solvents removed in vacuo to yield the crude 4d complex as a green powder (50.7 mg, 42%). 1H NMR (400.13 MHz, C6D6): delta=14.50 (s, 1H), 7.80 (d, J=6.4 Hz, 2H), 7.47 (t, J=6.7 Hz, 2H), 7.42-7.34 (m, 2H), 7.31-7.21 (m, 3H), 7.11 (t, J=7.2 Hz, 3H), 7.08-7.00 (m, 3H), 6.99-6.90 (m, 3H), 6.87 (s, 2H), 6.79-6.60 (m, 4H), 6.15 (d, J=8.2 Hz, 2H), 4.15 (sept, J=6.1 Hz, 1H), 3.38-3.20 (m, 4H), 2.47 (s, 6H), 2.38 (s, 6H), 2.29 (s, 6H), 1.15 (d, J=6.1 Hz, 3H), 0.59 (d, J=6.1 Hz, 3H). (0132) 13C NMR (100.6 MHz, CD2Cl2): delta=276.55, 210.42, 153.68, 146.72, 138.75, 138.16, 131.23, 129.58, 129.12, 128.97, 128.75, 128.31, 127.87, 127.77, 127.50, 127.23, 127.01, 125.83, 122.65, 121.72, 113.38, 76, 15, 53, 87, 51, 98, 21.54, 21.25, 20.83, 19.92, 19.04. MS (DART), m/z: 928.27512 (M+H)+; calc. for C55H56OClN2SRu: 928.27671.

With the synthetic route has been constantly updated, we look forward to future research findings about (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,belong ruthenium-catalysts compound

Reference£º
Patent; Bergen Teknologioverforing AS; Jensen, Vidar R.; Occhipinti, Giovanni; Hansen, Frederick Rosberg; US8716488; (2014); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI