Category: ruthenium-catalysts

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, and cas is 301224-40-8, its synthesis route is as follows.

cis-RuC12(slMes)(CHC6H4O1-Pr)(Ph2P(OMe)), cis-C843: C627 (35.0 g, 56 mmol) was dissolved in degassed CH2C12 (2000 mL) in an 1-neck round-bottomed flask under nitrogen, to which methyl diphenylphosphinite (50 g, 231 mmol) was syringed. The flask was connected to a Friedrich condenser, which was in turn attached to vacuum/nitrogen line. The mixture was degassed by vacuum/nitrogen 3-times. An oil bath was used to heat the flask. The oil bath temperature was kept at 50 C for 40 h and then cooled to room temperature. The solvent was removed under high vacuum. The residue was dissolved in a minimum amount of CH2C12 and loaded on top of Si02 gel column (4 x 3 in, D x H) and eluted with CH2C12. A red band which stuck on column was rinsed down by methanol. The solvent was removed by rotary evaporator and a green solid was obtained. The solid was further purified by recrystallization from CH2C12 /Hexanes. Yield: 15 g (32%). ?H NMR (400 MHz, C6D6, ppm): oe 16.45 (d, J = 24 Hz, RuCH, 1H), 10.11 (dd, J = 8 Hz, J = 2Hz, 1H), 7.55 (t, J = 9Hz, 2H), 7.20 (ddd, J = 9Hz, J = 7 Hz, J = 2 Hz, 1H), 7.000 (m, 3H), 6.87 (dt, J = 2 Hz, J = 8 Hz, 2H), 6.79 (t, J = 8 Hz, 1H), 6.75 – 6.65 (m, 3H), 6.61 (d, J = 10Hz), 6.20 (m, 2H), 4.11 (septet, J = 6Hz, -OCHIVIe2, 1H), 3.50-3.06 (m, 4H),3.38 (d, J = 10Hz, -OCH3, 3H), 2.92 (s, 3H), 2.51 (s, 3H), 2.45 (s, 3H), 2.33 (s, 3H), 1.95 (s, 3H),1.91 (s, 3H), 1.25 (d, J = 6Hz, 3H, OCH(CH3)(CH3), 3H), 0.97 (d, J = 6Hz, 3H, OCH(CH3)(CH3), 3H). 3?P NMR (162 MHz, C6D6, ppm): oe 140.9 (b).

301224-40-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,301224-40-8 ,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; MATERIA, INC.; GIARDELLO, Michael, A.; TRIMMER, Mark, S.; WANG, Li-Sheng; DUFFY, Noah, H.; JOHNS, Adam, M.; RODAK, Nicholas, J.; FIAMENGO, Bryan, A.; PHILLIPS, John, H.; (127 pag.)WO2017/53690; (2017); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

cis-cis- 1,3,5-triaminocyclohexane (30.0 nig, 0.232 mmol) was added to an ampoule charged with dichlorotris(triphenylphosphane)ruthenium(II) (196 mg, 0.204 mmol) dissolved in dichloromethane (20 mL), causing an instant colour change from black to orange. The solution was stirred at 50C for 4 days in the sealed vessel, during whichtime the solution changed colour to yellow and a white precipitate formed. The precipitate was removed by filtration and the filtrate reduced in volume to approx. 1 mL in vacuo. The product was precipitated by addition of pentane (20 mL) as an orange powder, and washed twice with pentane (20 mL). Yield: 115 mg (86.8 %, 0.177 mmol of RuCl2(K3-c -tach)(PPh3).CH2Cl2). NMR Spectroscopy Cs minor plane H NMR (CD2C12, 399.8 MHz, 293K) delta 7.85 (app t, HH = 7.5 Hz, VHP = 5.8 Hz, VHH = 1.5 Hz, 6H, P/Vz3, Ar2), 7.36 (m, 9H, Rho/>Lambda3, Ar3 + Ar4), 4.77 (s, 2H, NH2, N1), 3.90 (bs, 1Eta, CH, Cy1), 2.92 (s, 2Eta, CH, Cy2), 2.65 (d, VHH = 10.6 Hz, 2H, N N2), 1.92 (s, 4H, CH2, Cy3), 1.85 (d, HH = 10.6 Hz, 2H, NH2, N2), 1.62 (d, VHH = 15.3 Hz, 1H, CH2, Cy4), 1.00 (d, VHH = 15.3 Hz, 1H, CH2, Cy4); 31Rho{} NMR (CD2C12, 161.8 MHz, 293 ) delta 66.0 (s, IP, PPh3); “Ci’H} NMR (CD2C12, 100.5 MHz, 293K) delta 136.2 (d, ‘Jpc = 36.0 Hz, VPh3, Ar1), 134.2 (d, VPC = 10.1 Hz, VPh3, Ar2), 129.5 (d, VPC = 1.85 Hz, ?P 3, Ar4), 128.8 (d, VPC = 8.7 Hz, ?Ph3, Ar3), 44.0 (s, CH, Cy1), 43.8 (s, CH, Cy2), 35.0 (s, CH2, Cy3), 33.6 (s, CH2, Cy4).Mass Spectrometry ESI-MS: m/z 569.1186 ([RuCl(NCMe)( 3-c i-tach)(PPh3)l+. Calc 569.1173, 100 %), 528.0919 ([RuCl(K3-c-tach)(PPh3)]+; 528.0907, 25), 246.5607 ([RU(K3-CW- tach)(PPh3)]2+, 246.5608, 10). Infra-Red Spectroscopy ATR-IR: (cm 1) 3462, 3283, 3240, 3050, 2888, 1649, 1588, 1480, 1432 (P-Ph), 1367, 1346, 1270, 1211, 1183, 1156, 1089, 1027, 968, 905. Elemental Analysis CH2C12 c / % H / % N / % Found 46.25 4.92 6.43 0 51.15 5.37 7.46 1 46.31 4.97 6.48 Table 0.1: CHN Elemental analysis for RuCl2(K3-cw-tach)(PPh3)

The chemical industry reduces the impact on the environment during synthesis,15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),I believe this compound will play a more active role in future production and life.

Reference£º
Patent; UNIVERSITY OF YORK; GAMBLE, Aimee, Joanna; LYNAM, Jason, Martin; WALTON, Paul, Howard; WO2013/38134; (2013); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is Dichlorotris(triphenylphosphino)ruthenium (II), and cas is 15529-49-4, its synthesis route is as follows.

To a slurry of HtimAr (42 mg, 0.20 mmol) and MeONa (10.8 mg, 0.20 mmol) in THF (5 mL) was added a solution of [Ru(PPh3)3Cl2] (96 mg, 0.10 mmol) in THF (10 mL). The mixture was stirred for 4 h at room temperature. The solvent was removed in vacuo and the residue was washed with hexane and further recrystallized from CH2Cl2/hexane at room temperature. Block orange crystals of 2 suitable for X-ray diffraction were obtained in a week. Yield: 76 mg, 73% (based on Ru).

15529-49-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,15529-49-4 ,Dichlorotris(triphenylphosphino)ruthenium (II), other downstream synthetic routes, hurry up and to see

Reference£º
Article; Zhu, Hang; Ma, Qing; Jia, Ai-Quan; Chen, Qun; Leung, Wa-Hung; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 405; (2013); p. 427 – 436;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, and cas is 246047-72-3, its synthesis route is as follows.

Under an argon atmosphere a carbene complex of formula 5.II, wherein L represents a NHC ligand of formula 6a.II (153 mg, 0.18 mmol),and anhydrous CuCl (18 mg, 0.18 mmol) were placed in a Schlenck tube. Then dry, deoxygenated CH2C12 (10 ml) was added followed by a solution of compound 2.1 (38 mg, 0.18 mmol) in CH2C12 (4 ml). The resulting suspension was stirred at 30C for 1 h, thereafter it was concentrated in vacuum, and purified by silica-gel column chromatography (cyclohexane / EtOAc 5:2). After removal of solvent and washing with small amount of dry n-pentane complex 1.II, wherein Mes has the meaning of a mesityl group, was obtained as green, microcrystalline solid (100 mg, 83% of yield). Rf = 0.30 (hexane/EtOAc8:2);XH-NMR (500 MHz, CD2Cl2): delta[ppm]= 16.42 (s, 1H), 8.46 (dd, 1H, J = 9.1, 2.5 Hz), 7.80 (d, 1H, J = 2.5 Hz), 7.10 (s, 4H), 6:94 (d, 1H, J = 9.1 Hz), 5.01 (sept, 1H, J = 6.1 Hz), 4.22 (s, 4H), 2.47 (2s, 18H), 1.30 (d, 6H, J = 6.1 Hz); 13C-NMR (125 MHz, CD2Cl2): delta;[ppm]= 289.1, 208.2,156.8, 150.3, 145.0, 143.5, 139.6,139.3,129.8, 124.5,117.2,113.3, 78.2, 52.0, 21.3, 21.2,19.4; IR (KBr): nu [cm-1] = 2924, 2850,1606,1521,1480,1262, 1093, 918,745; MS (ESI): m/z 636 [M-CI]+; HRMS(EI): m/z calculated for C31H37N3O3Ru: [M+.] 671.1255, found 671.1229; Elemental analysis, calculated: (%) for C31H37N3O3Ru (671.63): C 55.44, H 5.55, N 6.26; found: C 55.35; H 5.70, N 6.09.

246047-72-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,246047-72-3 ,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, other downstream synthetic routes, hurry up and to see

Reference£º
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

RuCl2(PPh3)3 (1 g, 1 .04 mmol) and the ligand of formula (IVg) (obtained from Example 1 ) (231 .4 mg, 1 .1 mmol) were placed in a 25 mL Schlenk tube under argon atmosphere, and dissolved in dry diglyme (2 mL). The reaction mixture was heated to 165C for 2 h, allowed to cool down to room temperature and stored at -18C to precipitate further overnight. Cold Et2O (2 mL) was added while cooling with a dry ice//so-propa- nol bath. The precipitate was filtrated by cannula, and washed with Et2O (5 times 2 mL). The orange powder was dried in vacuo, affording 530 mg (79%) of Ru(6-MeNN- SEt)(PP i3)Cl2 as an orange powder. An equilibrium of two conformations of Ru(6- MeNNSEt)(PPh3)Cl2 are existent in solution, delivering a doubled set of signals in NMR. For1H-NMR only data of the major conformation is given due to overlapping signals.1H-NMR (300 MHz, CD2CI2): delta 7.67-7.16 (m, 17H, CHarom), 7.01 (d, 1 H, J = 7.8, CHarom), 5.65 (m, 2H), 4.47 (m, 1 H), 3.5 (m, 1 H), 3.34 (m, 1 H), 3.22 (d, 1 H, J = 1 1 .1 ), 2.98 (m, 1 H), 2.59 (m, 1 H), 1 .53 (m, 2H), 0.87 (t, 3H, J = 7.5) ppm.31P-NMR (122 MHz, CD2CI2): delta 48.8, 45.8 ppm.HRMS (ESI+): calculated for C29H32CI2N2PRUS (M+H): 644.0518; found 644.0518 (M+H), 667.0412 (M+Na)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Dichlorotris(triphenylphosphino)ruthenium (II), 15529-49-4

Reference£º
Patent; DSM IP ASSETS B.V.; BELLER, Matthias; BONRATH, Werner; DE VRIES, Johannes, Gerardus; FAN, Yuting; HUeBNER, Sandra; LEFORT, Laurent; MEDLOCK, Jonathan, Alan; PUYLAERT, Pim; VAN HECK, Richard; (49 pag.)WO2017/194663; (2017); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

Example B2: Preparation of [(CI)2Ru(Pphenyl3)(ligand L2)], K2tolueneyl 272.5 mg (0.284 mmol) of dichlorotris(triphenylphosphine)ruthenium(ll) and 160.0 mg (0.296 mmol) of ligand L2 are placed in a 10 ml Schlenk tube and admixed with 6.5 ml of dry toluene under argon. The dark suspension is stirred overnight at room temperature, resulting in a colour change to orange-red. After addition of 4 ml of dry pentane, the stirrer is switched off and the supernatant orange solution is filtered off with suction from the orange solid. The solid is washed five times with 4 ml each time of pentane and dried in a high vacuum. This gives 244 mg (88% of theory) of the title compound as an orange powder. 31P-NMR (C6D6, 121.5 MHz, ppm): 49.7 (d, J = 40), 61.2 (d, J = 40).

The chemical industry reduces the impact on the environment during synthesis,15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),I believe this compound will play a more active role in future production and life.

Reference£º
Patent; SOLVIAS AG; WO2007/104690; (2007); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 246047-72-3, its synthesis route is as follows.

In a flame dry Schlenk tube 2nd generation Grubbs catalyst(98 mg, 0.11 mmol), CuCl (12.0 mg, 0.12 mmol) and ligand precursor 7 (35.0 mg, 0.11 mmol) were placed. Then, dry DCM was addedunder atmosphere of argon and a mixture was heated to 30 C. The progress of the reaction was monitored by TLC (c-Hex:EtOAc, 2:1).After 20 min the reaction mixture was cooled down to RT and thesolvent was evaporated. Purification by silica-gel chromatography(c-Hex:EtOAc, 10:1, followed by c-Hex:EtOAc, 3:2) yielded brick-redsolid (48%). A single crystal of compound 11 suitable for X-raydiffraction studies was grown at a temperature of 5 C from atrichloromethane/n-hexane solution. 1H NMR (400 MHz, CD2Cl2): delta= 17.9 (s, 1H, Ru]CHAr), 8.50 (d, 1H, J 12.0, Ar-H), 7.87 (dd, 1H,J 16.0, 8.0, Ar-H), 7.45-6.88 (m, 10H, Ar-H), 4.28-4.04 (m, 4H,CH2 2), 2.67-2.34 (br, 15H, CH3 5), 2.01 (s, 3H, CH3); 13C NMR(125 MHz, CD2Cl2): delta=303.9, 210.9, 142.8, 140.3, 136.8, 134.5, 132.7,130.5, 129.5, 128.7, 128.0, 125.7, 125.0, 123.0, 116.6, 77.5, 52.2, 51.1,20.9, 19.9, 19.8, 18.4, 17.6; IR (film from CH2Cl2): n 2913, 1607,1481, 1414,1258, 1013, 924, 849, 806, 763, 645, 576, 552 cm1; Anal.Calcd. for C34H36BrCl2N4ORu: C, 53.13; H, 4.72; N, 7.29; Found: C,53.81; H, 4.76; N, 7.27, m/z 791.0, [MNa].

246047-72-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,246047-72-3 ,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Szwaczko, Katarzyna; Czelu?niak, Izabela; Grela, Karol; Journal of Organometallic Chemistry; vol. 847; (2017); p. 146 – 153;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The reaction of 2,6-diacetylpyridine mono(4-methoxyphenylthiosemicarbazone) ligand, HL1, prepared as described in reference 35, with RuCl2(PPh3)3 in 1:1M ratios was carried out, in presence of Et3N, in degassed toluene for 3hat room temperature under nitrogen atmosphere. The resulting brown solution was filtered and evaporated to dryness. The solid residue was washed with pentane and dried in vacuo. Further purification by recrystallization from DMSO led to single crystals which were studied by X-ray diffraction techniques.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Dichlorotris(triphenylphosphino)ruthenium (II), 15529-49-4

Reference£º
Article; Matesanz, Ana I.; Hernandez, Carolina; Perles, Josefina; Souza, Pilar; Journal of Organometallic Chemistry; vol. 804; (2016); p. 13 – 17;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is Dichlorotris(triphenylphosphino)ruthenium (II), and cas is 15529-49-4, its synthesis route is as follows.

Solid [Ru(PPh3)3Cl2] (200 mg, 0.21 mmol) was added to a methanol solution (30 ml) of H2L1 (153 mg, 0.42 mmol) and NaOAc(35 mg, 0.42 mmol). The mixture was boiled under reflux for 1 h and then cooled to room temperature. The red solid deposited was collected by filtration and dried in air. This material was dissolved in minimum amount of dichloromethane and transferred to a silica gel column packed with dichloromethane. The first yellow band moved with the eluent 1 : 4 mixture of dichloromethane/ n-hexane was discarded. The following red band containing the complex 1 was eluted with a 2 : 3 mixture of dichloromethane/ n-hexane. The red solution thus obtained was evaporated to dryness and the complex was collected as a dark red solid. The yield was 220 mg (78 %).

15529-49-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,15529-49-4 ,Dichlorotris(triphenylphosphino)ruthenium (II), other downstream synthetic routes, hurry up and to see

Reference£º
Article; Nagaraju, Koppanathi; Pal, Samudranil; Inorganica Chimica Acta; vol. 413; (2014); p. 102 – 108;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

301224-40-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, cas is 301224-40-8,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In a glove box, a flask was charged with Ru complex 4 or 5 and Ag salt 3. Anhydrous degassed CH2Cl2 was then added and the resulting mixture was stirred at room temperature for 3h in the dark. The solids were filtered off through a Celite layer and washed with anhydrous (2mL). The solution was diluted with anhydrous hexane (10mL) and remaining precipitated Ag salt was again filtered off. Evaporation of the solvents on a rotary vacuum evaporator (40C, 1h, 25kPa) and finally at oil pump vacuum (25C, 1h, 1kPa) gave the products 1 or 2.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, 301224-40-8

Reference£º
Article; Lipovska, Pavlina; Rathouska, Lucie; ?im?nek, Ond?ej; Ho?ek, Jan; Kola?ikova, Viola; Ryba?kova, Marketa; Cva?ka, Josef; Svoboda, Martin; Kvi?ala, Jaroslav; Journal of Fluorine Chemistry; vol. 191; (2016); p. 14 – 22;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI