Category: ruthenium-catalysts

203714-71-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 203714-71-0, name is Dichloro(2-isopropoxyphenylmethylene)(tricyclohexylphosphine)ruthenium (II) This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

NHC ligand precursor 21 (9 mg, .03 mmol), KOz-Bu(F6) (6 mg, .03 mmol), and ruthenium complex 911 (13 mg, .02 mmol) were all combined in CgDbeta in a screw cap NMR tube in a glove box. The NMR tube was removed and heated at 600C for 2.5 hour in a fume hood. Conversion to catalyst 22 was determined to be 14% by proton NMR. 1H NMR (300 MHz, CDCl3) delta 17.19 (IH, s).

203714-71-0, 203714-71-0 Dichloro(2-isopropoxyphenylmethylene)(tricyclohexylphosphine)ruthenium (II) 10941020, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Patent; MATERIA, INC.; CALIFORNIA INSTITUTE OF TECHNOLOGY; WO2007/75427; (2007); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials.246047-72-3, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium A new synthetic method of this compound is introduced below.

General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid.

246047-72-3, As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

301224-40-8, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 301224-40-8, name is (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride This compound has unique chemical properties. The synthetic route is as follows.

HII 65 HII (200mg) and P(0’Pr)3 (5eq) were stirred in for 72h. The crude 65 was recrystallised from DCM/pentane. (400MHz, 298K): 16.05 (d, 1 H, J = 35.3 Hz, C=CH), 10.24 (d, 1 H, J = 9.7 Hz, Ph-H), 6.87-6.83 (m, 2H, Ph-H), 6.78 (s, 1 H, Ph-H), 6.61 (s, 1 H, Ph-H), 6.19-6.16 (m, 2H, Ph- H), 4.67 (brs, 2H, PO-CH-CH3), 4.09-4.06 (m, 1 H, Ph-0-CH-CH3), 4.04 (brs, 1 H, PO- CH-CH3), 3.43-3.40 (m, 1 H), 3.16-3.02 (m, 3H), 2.89 (s, 3H, Mes-CH3), 2.58 (s, 3H, CH3), 2.46 (s, 3H, CH3), 2.42 (s, 3H, CH3), 2.18 (s, 3H, CH3), 1.92 (s, 3H, CH3), 1.48- 0.80 (m, 24H, PO-CH-CH3).31P{1H} (121.49MHz, 298K): 128.7 (s)

With the complex challenges of chemical substances, we look forward to future research findings about 301224-40-8,belong ruthenium-catalysts compound

Reference£º
Patent; UNIVERSITY COURT OF THE UNIVERSITY OF ST ANDREWS; CAZIN, Catherine; WO2011/117571; (2011); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

301224-40-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 301224-40-8, name is (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Take Grubbs-HoveydaII catalyst (464.0mg, 0.74mmol),Compound II (201.0 mg, 0.9 mmol,) prepared in Example 1 was placed in a 25 mL round bottom flask.Add 15 mL of dry THF and stir at 800 r / min at room temperature for 30 min.After the reaction was completed, the solvent was dried with a vacuum pump to obtain a brown-red solid.Add n-hexane to the solid and stir thoroughly. At this time, the color of n-hexane will turn red. Centrifuge the mixture, discard the liquid, and dry the solid.Compound III (385 mg, yield: 70.6%) was obtained as a brown solid powder.

301224-40-8, As the paragraph descriping shows that 301224-40-8 is playing an increasingly important role.

Reference£º
Patent; Jilin Chemical College; Yu Xiaobo; Geng Shudong; Liu Guanchen; (14 pag.)CN110563769; (2019); A;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.15529-49-4, name is Dichlorotris(triphenylphosphino)ruthenium (II) An updated downstream synthesis route of 15529-49-4 as follows., 15529-49-4

General procedure: Diphosphine ligand (2.0 mmol) was dissolved in 10 mL of dichloromethane and the solution was added dropwise to a stirred solution of RuCl2(PPh3)3 (1.0 mmol) in 10 mL of dichloromethane. The reaction mixture was stirred approximately for 50 min at room temperature. The brown solution was filtered to remove the insoluble impurities. The solvent was reduced by a vacuum and the product was then precipitated by adding n-hexane. The yellow solid was filtered and washed three times with 20 mL of diethyl ether., 15529-49-4

15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Article; Al-Noaimi, Mousa; Warad, Ismail; Abdel-Rahman, Obadah S.; Awwadi, Firas F.; Haddad, Salim F.; Hadda, Taibi B.; Polyhedron; vol. 62; (2013); p. 110 – 119;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 301224-40-8, name is (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below., 301224-40-8

A further example of a synthesis producing an NHC containing cis complex is shown below. [0088] HII (200 mg) and P(OiPr)3 (5 eq) were stirred in for 72 h. The crude 65 was recrystallised from DCM/pentane. [0089] 1H (400 MHz, 298K): 16.05 (d, 1H, J=35.3 Hz, C?CH), 10.24 (d, 1H, J=9.7 Hz, Ph-H), 6.87-6.83 (m, 2H, Ph-H), 6.78 (s, 1H, Ph-H), 6.61 (s, 1H, Ph-H), 6.19-6.16 (m, 2H, Ph-H), 4.67 (brs, 2H, PO-CH-CH3), 4.09-4.06 (m, 1H, Ph-O-CH-CH3), 4.04 (brs, 1H, PO-CH-CH3), 3.43-3.40 (m, 1H), 3.16-3.02 (m, 3H), 2.89 (s, 3H, Mes-CH3), 2.58 (s, 3H, CH3), 2.46 (s, 3H, CH3), 2.42 (s, 3H, CH3), 2.18 (s, 3H, CH3), 1.92 (s, 3H, CH3), 1.48-0.80 (m, 24H, PO-CH-CH3). [0090] 31P{1H} (121.49 MHz, 298K): 128.7 (s)

301224-40-8, As the paragraph descriping shows that 301224-40-8 is playing an increasingly important role.

Reference£º
Patent; University Court of the University of St. Andrews; Cazin, Catherine; US2014/228563; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

A mixture of [RuCl2(PPh3)3] (50 mg, 0.052 mmol) and bipy (10mg, 0.06 mmol) were charged in a two necked round bottomed flask and kept under vacuum for 15 min. 20 mL of dry acetone was then added and the brown mixture was stirred under argon atmosphere for approximately 30 min. A light yellowish-brown solid was precipitated that was filtered off, washed with diethylether (2 5 mL) and subsequently dried in vacuo. Yield: 90 %(40 mg). UV-Vis (e, Mu1 cm1): kmax (CH2Cl2) = 490 (5370), 350(9640).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Dichlorotris(triphenylphosphino)ruthenium (II), 15529-49-4

Reference£º
Article; Zacharopoulos, Nikolaos; Kolovou, Evgenia; Peppas, Anastasios; Koukoulakis, Konstantinos; Bakeas, Evangelos; Schnakenburg, Gregor; Philippopoulos, Athanassios I.; Polyhedron; vol. 154; (2018); p. 27 – 38;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

20759-14-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ruthenium(III) chloride hydrate, cas is 20759-14-2,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 1 Synthesis of (2,4-dimethylpentadienyl) (ethylcyclo-pentadienyl) Ruthenium and Heat Decomposition Properties Thereof 400 g of zinc was weighed into a four-necked flask. After purging the container with argon, 205 ml of 2,4-dimethyl-1,3-pentadiene was added thereto to give a suspension. Then a solution of 30 g of ruthenium trichloride n-hydrate (n: about 3) dissolved in 1000 ml of methanol was dropped thereinto at room temperature over 40 minutes. After the completion of the dropping, the mixture was stirred at room temperature for 30 minutes, then heated to 60 C. and stirred for additional 2 hours. The mixture was once cooled by allowing to stand and then 12 ml of ethylcyclopentadiene was added thereto. The resultant mixture was stirred as such at room temperature for 30 minutes, then heated to 60 C. and stirred for additional 2 hours. After the completion of the reaction, the mixture was cooled to room temperature and the unreacted zinc was removed with the use of a glass filter. Next, it was extracted with hexane (750 ml*1, 300 ml*4). The extracts were concentrated under reduced pressure and the oily product thus obtained was distilled under reduced pressure to thereby give 25.4 g of target (2,4-dimethylpentadienyl) (ethylcyclo-pentadienyl) ruthenium (yield: 76.3%). Oily yellow product: 1H-NMR (500 MHz, CDCl3, deltappm) 5.38 (s, 1H), 4.63 (t, J=2.0 Hz, 2H), 4.52(t, J=2.0 Hz, 2H), 2.70 (d, J=2.5 Hz, 2H), 2.15 (q, J=7.5 Hz, 2H), 1.93 (s, 6H), 1.12 (t, J=7.5 Hz, 3H), -0.09 (d, J=2.5 Hz, 2H) IR (neat, cm-1)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Ruthenium(III) chloride hydrate, 20759-14-2

Reference£º
Patent; TOSOH CORPORATION; US2003/88116; (2003); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

After a 50 mL two-necked flask was purged with argon, the ligand 3m (10 mmol), 30 mL of CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate after filtration to obtain sand. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain a green solid product 4m. The yield was 84%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, 246047-72-3

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

It is a common heterocyclic compound, the ruthenium-catalysts compound, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3 its synthesis route is as follows.

General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid.

246047-72-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,246047-72-3 ,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI