Category: ruthenium-catalysts

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, and cas is 246047-72-3, its synthesis route is as follows.,246047-72-3

In order to confirm by a series of compounds obtained by reaction of, reference the known method for the synthesis of beta, beta-di fluorophenyl ethylene. Furthermore, the known method of the reference (valeant literature 3, the following formula) synthesis of the (1,3-II Yl -4,5- dihydro imidazole -2-type methylene) (three ring hexyl phosphine ) methylene dichloride difluoromethane ruthenium. The following shows the results of these evaluations. These as spectrum standard, because of the above-mentioned of the internal liquid of the (mixture) is consistent with the NMR spectrum, so that the beta, beta-difluoro styrene and (1,3-II Yl -4,5- dihydro imidazole -2-type methylene) (three ring hexyl phosphine ) difluoro methylene b chlorize the generating.

With the complex challenges of chemical substances, we look forward to future research findings about 246047-72-3,belong ruthenium-catalysts compound

Reference£º
Patent; Asahi Glass Co., Ltd.; YUSUKE, TAKAHIRA; (43 pag.)CN105517982; (2016); A;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 246047-72-3, its synthesis route is as follows.,246047-72-3

Under an argon atmosphere a carbene complex of formula 5.II, wherein L represents a NHC ligand of formula 6a.II (153 mg, 0.18 mmol),and anhydrous CuCl (18 mg, 0.18 mmol) were placed in a Schlenck tube. Then dry, deoxygenated CH2C12 (10 ml) was added followed by a solution of compound 2.1 (38 mg, 0.18 mmol) in CH2C12 (4 ml). The resulting suspension was stirred at 30C for 1 h, thereafter it was concentrated in vacuum, and purified by silica-gel column chromatography (cyclohexane / EtOAc 5:2). After removal of solvent and washing with small amount of dry n-pentane complex 1.II, wherein Mes has the meaning of a mesityl group, was obtained as green, microcrystalline solid (100 mg, 83% of yield). Rf = 0.30 (hexane/EtOAc8:2);XH-NMR (500 MHz, CD2Cl2): delta[ppm]= 16.42 (s, 1H), 8.46 (dd, 1H, J = 9.1, 2.5 Hz), 7.80 (d, 1H, J = 2.5 Hz), 7.10 (s, 4H), 6:94 (d, 1H, J = 9.1 Hz), 5.01 (sept, 1H, J = 6.1 Hz), 4.22 (s, 4H), 2.47 (2s, 18H), 1.30 (d, 6H, J = 6.1 Hz); 13C-NMR (125 MHz, CD2Cl2): delta;[ppm]= 289.1, 208.2,156.8, 150.3, 145.0, 143.5, 139.6,139.3,129.8, 124.5,117.2,113.3, 78.2, 52.0, 21.3, 21.2,19.4; IR (KBr): nu [cm-1] = 2924, 2850,1606,1521,1480,1262, 1093, 918,745; MS (ESI): m/z 636 [M-CI]+; HRMS(EI): m/z calculated for C31H37N3O3Ru: [M+.] 671.1255, found 671.1229; Elemental analysis, calculated: (%) for C31H37N3O3Ru (671.63): C 55.44, H 5.55, N 6.26; found: C 55.35; H 5.70, N 6.09.

With the complex challenges of chemical substances, we look forward to future research findings about (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

Reference£º
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is Dichlorotris(triphenylphosphino)ruthenium (II), as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 15529-49-4, its synthesis route is as follows.,15529-49-4

General procedure: To a round-bottomed flask with a stir bar was placed with [Ru(PPh3)3Cl2] (868 mg, 2.0 mmol) under the nitrogen. Pre-dried THF(10 mL) was added and the resulting mixture was stirred at room temperature. Then salen-enH2 (536 mg, 2.0 mmol) and a little excess of Et3N (252 mg, 2.5 mmol) in THF (5 mL) were added. The reaction mixture was stirred at room temperature overnight. After removal of solvents, CH2Cl2 (15 mL) was added and the solution was filtered through cilite. The filtrate was concentrated and the residue was washed with Et2O (5mL 2) and hexane (5 mL 2) to give the desired product. Recrystallization from CH2Cl2/Et2O (1:2) afforded green block-shaped crystals of [RuCl(PPh3)(salen)] (3) suitable for X-ray diffraction in three days. Yield: 1011 mg, 76% (based on Ru).

With the complex challenges of chemical substances, we look forward to future research findings about Dichlorotris(triphenylphosphino)ruthenium (II)

Reference£º
Article; Tang, Li-Hua; Wu, Fule; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 477; (2018); p. 212 – 218;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 246047-72-3, its synthesis route is as follows.,246047-72-3

After a 50 mL two-necked flask was purged with argon, the ligand 3be (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to produce sand after filtration. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain 4be green solid product in a yield of 48%.

With the complex challenges of chemical substances, we look forward to future research findings about (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 246047-72-3, its synthesis route is as follows.,246047-72-3

Example 52 Synthesis of Ru complex 6a To a 50 mL two-necked round bottom flask, after filling with Ar atmosphere, were added ligand 5a (l .Ommol) and CuCl (3.0mmol, 3eq) and 30 mL dry DCM, followed by refilling with Ar three times and protected with Ar balloon in close system. Ru complex lb (l.Ommol) was added under Ar protection, and the mixture was stirred for 0.5 hr at room temperature. After the reaction was complete, the solution was filtered and the filtrate was concentrated and slurred with silica gel. The crude was obtained by silica gel column chromatography and washed with methanol or pentane-DCM to obtain 453mg of yellow-green solid product 6a, yield: 79%. Ru complex (6a) 1HNMR (400 MHz, CDC13): delta 18.53 (s, 1H, Ru=CH), 8.59 (s, 1H), 7.28-6.49 (m, 11H), 4.160 (s, 4H, NCH2CH2N), 2.50 (s, 12H), 2.42 (s, 6H).

With the complex challenges of chemical substances, we look forward to future research findings about (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

Reference£º
Patent; ZANNAN SCITECH CO., LTD.; ZHAN, James Zheng-Yun; WO2011/79439; (2011); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, and cas is 246047-72-3, its synthesis route is as follows.,246047-72-3

After a 50 mL two-necked flask was purged with argon, the ligand 3bv (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was completed, silica gel was added to the filtrate to prepare a sand product. The crude product was obtained by silica gel column chromatography, and then washed with methanol or pentane-DCM to obtain a green solid product 4bv. Yield: 90%.

With the complex challenges of chemical substances, we look forward to future research findings about 246047-72-3,belong ruthenium-catalysts compound

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is Dichlorotris(triphenylphosphino)ruthenium (II), and cas is 15529-49-4, its synthesis route is as follows.

Add 1a (0.600g, 3.44mmol) under nitrogen protection In a 100mL three-neck bottle, Additional tris(triphenylphosphine) ruthenium dichloride (2.50 g, 2.61 mmol) and 40.0 mL of tetrahydrofuran, Stir and dissolve, then add acetyl chloride (0.22 mL, 3.13 mmol). After the addition, the mixture was heated to 73 C (external temperature: 83 C), and the reaction was stirred for 3 hours to stop the reaction. The reaction solution was concentrated under reduced pressure at 40 C. Add isopropanol / petroleum ether (1.0 mL / 20.0 mL) and stir to precipitate a solid. Filter and wash with a small amount of petroleum ether. After drying, 2.10 g of red ruthenium complex product 2a (93%) was obtained.

15529-49-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,15529-49-4 ,Dichlorotris(triphenylphosphino)ruthenium (II), other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (19 pag.)CN109134547; (2019); A;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 1c (154 mg, 519 lmol) and [RuCl2(PPh3)3] (498 mg,519 lmol) were dissolved in CHCl3 (3 mL). The orange solutionwas stirred for 10 min at room temperature and then filteredthrough Celite. After four days, orange crystals, suitable for single-crystal X-ray diffraction, were obtained by vapor diffusion ofEt2O into the filtrate. The supernatant was decanted, the solidwas washed with Et2O (2 mL) and dried in vacuo. Yield: 312 mg(343 lmol, 66%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Dichlorotris(triphenylphosphino)ruthenium (II), 15529-49-4

Reference£º
Article; Gericke, Robert; Wagler, Joerg; Polyhedron; vol. 125; (2017); p. 57 – 67;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Synthesis of the ruthenium(II) Schiff base complexes (2a-d) was accomplished according to the following procedure: To a solution of Schiff base 1a-d in methanol was added dropwise a solution of NaOH in methanol and the reaction mixture was stirred for 2hat room temperature. The deprotonated ligand mixture was transferred by cannula to a 50-mL three-necked flask fitted with a reflux condenser containing the [RuCl2(PPh3)3] precursor, stirred mixture was refluxed for 4h. A yellow precipitate was then filtered and washed with methanol and ethyl ether and then dried in a vacuum.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Dichlorotris(triphenylphosphino)ruthenium (II), 15529-49-4

Reference£º
Article; Afonso, Maria Beatriz A.; Cruz, Thais R.; Silva, Yan F.; Pereira, Joao Clecio A.; Machado, Antonio E.H.; Goi, Beatriz E.; Lima-Neto, Benedito S.; Carvalho-Jr, Valdemiro P.; Journal of Organometallic Chemistry; vol. 851; (2017); p. 225 – 234;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is Dichlorotris(triphenylphosphino)ruthenium (II), as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 15529-49-4, its synthesis route is as follows.

PPh3)3RuCI2 (1 eq., 0.575 g, 0.6 mmol) and 1 ,1-bis-2-methylphenyl-prop-2-yn-1-ol (compound C, 1 .5 eq., 0.213 g, 0.9 mmol) were added in 4 ml HCI/dioxane solution (0.15 mol/l). The solution was heated to 90C for 3 hour, after which the solvent was removed under vacuum. Hexane (20 ml) was added to the flask and the solid was ultrasonically removed from the wall. The resulting suspension was filtered and washed two times using hexane (5 ml). The remaining solvent was evaporated affording a red-brown powder; 0.52 g (Yield: 95 %). The product was characterized by NMR spectra H and P. 1H NMR (300 MHz, CDCI3, TMS): delta 7.56 (dd, 1 1 H), 7.37 (t, 6 H), 7.21-7.31 (m, 13 H), 7.09 (tetra, 3 H), 6.95 (t, 3 H), 6.47 (t, 1 H), 6.14 (s, 1 H), 2.20 (s, 3 H), 1.66 (s, 3 H). 31 P NMR (121.49 MHz, CDCI3): delta 29.33.

15529-49-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,15529-49-4 ,Dichlorotris(triphenylphosphino)ruthenium (II), other downstream synthetic routes, hurry up and to see

Reference£º
Patent; GUANG MING INNOVATION COMPANY (WUHAN); W.C. VERPOORT, Francis; YU, Baoyi; WO2014/108071; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI