Category: ruthenium-catalysts

246047-72-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

A 50 mL two-necked flask was purged with argon and the ligands 3cy (10mmol), CuCl (30mmol, 3eq) and 30mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to produce sand after filtration. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain 4cy green solid product in a yield of 70%.

The chemical industry reduces the impact on the environment during synthesis,246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

Complex 1 (2.0 grams) was dissolved in toluene (10 mL), and 4-phenylpyridine (1.50 grams, 4 mol equivalents) was added. The reaction flask was purged with argon and the reaction mixture was stirred for approximately 12 hours at about 20 C. to about 25 C. during which time a color change from dark purple to dark green was observed. The reaction mixture was transferred into 75 mL of cold (about 0 C.) pentane, and a dark green solid precipitated. The precipitate was filtered, washed with 420 mL of cold pentane, and dried under vacuum to afford (IMesH2)(C11H9N)2(Cl)2Ru-CHPh 13 as a dark green powder (2.0 grams, 97% yield). [00135] 1H NMR (500 MHz, CD2Cl2): d19.23 (s, 1H, CHPh), 8.74 (br. s, 2H, pyridine), 7.91 (br. s, 2H, pyridine), 7.70-7.08 (multiple peaks, 19H, ortho CH, para CH, meta CH, pyridine), 6.93 (br. S, 2H, Mes CH) 6.79 (br. s, 2H, Mes CH), 4.05 (br. s, 4H, NCH2CH2N), 2.62-2.29 (multiple peaks, 18H, Mes CH3).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, 246047-72-3

Reference£º
Patent; California Institute of Technology; Cymetech, LLP; US6759537; (2004); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

After a 50 mL two-necked flask was purged with argon, the ligand 3be (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to produce sand after filtration. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain 4be green solid product in a yield of 48%.

The chemical industry reduces the impact on the environment during synthesis,246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

Under argon dichlorotris(triphenylphosphine)ruthenium(II) (0.53 g, 0.55 mmol) is added to a solution of 2-(diphenylphosphino)-N-(2-(methylthio)benzylidene)ethanamine (0.20 g, 0.55 mmol) in toluene (15 ml). After stirring for 20 h at 110 C. the reaction mixture is cooled to room temperature and evaporated under vacuo to a volume of 5 ml. To this red suspension hexane (20 ml) is added. After stirring for 15 min the suspension is filtered and washed with hexane (4 ml). The red filter cake is dried under vacuo for 19 h and then suspended in diethyl ether (6 ml). The suspension is filtered, washed with diethyl ether (4¡Á4 ml) and the filter cake is dried under vacuo. Complex 8 is obtained as a light-red solid (0.29 g, 67%). Analytical data: 1H-NMR (400 MHz, CDCl3): 8.78 (d, J=8.84, 1H), 8.33 (m, 1H), 7.70 (m, 3H), 7.54-7.06 (m, 25H), 4.59 (m, 1H), 4.53 (m, 1H), 2.55 (m, 2H), 1.83 (d, J=2.53, 3H). 31P-NMR (500 MHz, CDCl3): 40.62 (d, J=32.27, 1P), 36.72 (d, J=32.37, 1P). MS (ESI): 797.18 (62%, M+), 762.12 (100%, [M-Cl]+).

The chemical industry reduces the impact on the environment during synthesis,15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),I believe this compound will play a more active role in future production and life.

Reference£º
Patent; GIVAUDAN SA; GEISSER, Roger Wilhelm; OETIKER, Juerg Daniel; SCHROeDER, Fridtjof; (17 pag.)US2016/326199; (2016); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 246047-72-3, its synthesis route is as follows.

Grubbs second generation catalyst (100 mg, 0.117 mmol), 2-[(2,4,6-trimethylphenylimino)methyl]phenol (pKa: 8.84+/- 0.30) (0.117 mmol), silver (I) carbonate (16.27 mg, 0.058 mmol), and THF (2 ml) were reacted at room temperature during 2 h. The solvent was evaporated and crude reaction product purified on chromatography column to give an orange-brown complex. Yield 30%.

246047-72-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,246047-72-3 ,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Telene SAS; EP2151446; (2010); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

A mixture of HL1 (80mg, 0.20mmol), triethylamine (20mg, 0.20mmol) and 1[Ru(PPh3)3Cl2] (192mg, 0.20mmol) were stirred in tetrahydrofuran (20mL) for 6h at room temperature, during which the color of solution changed from brown to dark red. After removal of solvents in vacuo, dichloromethane (20mL) was added and the solution was filtered. The filtrate was concentrated and the residue was washed with diethyl ether (5mL¡Á2) and hexane (5mL¡Á2) to give the desired product. Recrystallization from dichloromethane/hexane (1:3) afforded dark red block crystals of [Ru(L1)(PPh3)2Cl] (1) suitable for X-ray diffraction in three days. Yield: 140mg, 66% (based on ruthenium). IR (KBr disc, cm-1): nuC=N 1568 (m), nuC-O 1304 (s), nuC-S 744 (w), nuPPh3 1433(m), 1091(s) and 694 (w), nuC-Br 564 and 529 (s); 31P NMR (CDCl3, 162MHz): delta 17.0 (s, PPh3) ppm. 1H NMR (CDCl3, 400MHz): delta 9.82 (s, 1H, CH=N), 7.91-7.52 (m, 30H, PPh3), 7.21-7.10 (m, 2H, Ar-H), 6.35-6.20 (m, 4H, Ar-H), 2.17 (s, 3H, SCH3) ppm. MS (FAB): m/z 1061 [M+], 1026 [M+-Cl], 799 [M+-PPh3], 537 [M+-2PPh3], 513 [Ru(L1)]+. Anal. Calc. for C50H40NOP2ClBr2SRu: C, 56.59; H, 3.80; N, 1.32%. Found: C, 56.54; H, 3.83; N, 1.36%.

The chemical industry reduces the impact on the environment during synthesis,15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),I believe this compound will play a more active role in future production and life.

Reference£º
Article; Ji, Jiao; Chen, Xin; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 494; (2019); p. 105 – 111;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO96,mainly used in chemical industry, its synthesis route is as follows.,15529-49-4

2-Methyl-acrylic acid 3-trimethoxysilane propyl ester (87 mg, 0.35 mmol) in dry THF was treated with triethylamine (0.20 mL) and the mixture was stirred for 30 min at ambient temperature under air. [RuCl2(PPh3)3] (335 mg, 0.35 mmol) was added and the reaction mixture was stirred at reflux for 2 h, during which there was a color residue was washed with diethyl ether and hexane. Recrystallization from CH2Cl2/hexane afforded dark green crystals of 1 in a week. Yield: 128 mg, 47% (based on Ru). IR (KBr disc, cm-1): nu(C=C) 1623 (s), nu(OCO) 1504 (s) and 1472 (s). MS (FAB): m/z = 781 [M]+, 746 [M-Cl]+, 711 [M-2Cl]+. mueff = 1.93 muB. Anal. for C40H35O2Cl2P2Ru: calcd. C 61.46, H 4.51%; found C 61.41, H 4.48%.

With the complex challenges of chemical substances, we look forward to future research findings about Dichlorotris(triphenylphosphino)ruthenium (II),belong ruthenium-catalysts compound

Reference£º
Article; Gu, Jiling; Shi, Li-Miao; Ma, Xiu-Fang; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 466; (2017); p. 382 – 388;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3, it is a common heterocyclic compound, the ruthenium-catalysts compound, its synthesis route is as follows.,246047-72-3

A suspension of 1.00 g (1.18 mmol) of [RuCl2(PCyS Xlm^MesXphenylmethylene)] (commercially available from Sigma- Aldrich Inc., St. Louis, USA), 0.13 g (1.30 mmol) of copper chloride and 0.36 g (1.30 mmol) of l-morpholine-4-yl-2-[((E,Z)-2-propenyl)-phenoxy]- propan-1-one as a 4:1 mixture ofE/Z-isomers in 75 ml of dichloromethane was stirred for 30 min at 400C. The reaction mixture was evaporated to dryness at 400C/ 10 mbar. The residue was stirred in 250 ml of ethyl acetate for 30 min at room temperature. The dark green suspension was filtered and the filtrate was evaporated to dryness at 40C/10 mbar. The crude title product was purified by silica gel chromatography (cyclo-hexane/ethyl acetate 1 :2) to yield 0.38 g (45% yield) of the title compound as a green powder.MS: 725.2 (M+). Anal, calcd. for C35H43Cl2N3O3Ru ? 1Z2 CH2Cl2: C, 55.51; H, 5.77; N, 5.47; Cl, 13.85. Found: C, 54.75; H, 5.76; N, 5.30; Cl, 13.71.Crystals of the title compound suitable for X-ray crystal structure analysis were grown by vapor diffusion of pentane into a solution of 10 mg of [RuCl2(=CH(o-OCH(Me)CO-JV- Morpho IuIe)Ph)(ImH2MeS)] in 0.5 ml of dichloromethane at room temperature.Fig. 2 shows a labeled view of the complex of formula F.

246047-72-3 is used more and more widely, we look forward to future research findings about (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; WO2009/124853; (2009); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4, it is a common heterocyclic compound, the ruthenium-catalysts compound, its synthesis route is as follows.,15529-49-4

cis-cis- 1,3,5-triaminocyclohexane (30.0 nig, 0.232 mmol) was added to an ampoule charged with dichlorotris(triphenylphosphane)ruthenium(II) (196 mg, 0.204 mmol) dissolved in dichloromethane (20 mL), causing an instant colour change from black to orange. The solution was stirred at 50C for 4 days in the sealed vessel, during whichtime the solution changed colour to yellow and a white precipitate formed. The precipitate was removed by filtration and the filtrate reduced in volume to approx. 1 mL in vacuo. The product was precipitated by addition of pentane (20 mL) as an orange powder, and washed twice with pentane (20 mL). Yield: 115 mg (86.8 %, 0.177 mmol of RuCl2(K3-c -tach)(PPh3).CH2Cl2). NMR Spectroscopy Cs minor plane H NMR (CD2C12, 399.8 MHz, 293K) delta 7.85 (app t, HH = 7.5 Hz, VHP = 5.8 Hz, VHH = 1.5 Hz, 6H, P/Vz3, Ar2), 7.36 (m, 9H, Rho/>Lambda3, Ar3 + Ar4), 4.77 (s, 2H, NH2, N1), 3.90 (bs, 1Eta, CH, Cy1), 2.92 (s, 2Eta, CH, Cy2), 2.65 (d, VHH = 10.6 Hz, 2H, N N2), 1.92 (s, 4H, CH2, Cy3), 1.85 (d, HH = 10.6 Hz, 2H, NH2, N2), 1.62 (d, VHH = 15.3 Hz, 1H, CH2, Cy4), 1.00 (d, VHH = 15.3 Hz, 1H, CH2, Cy4); 31Rho{} NMR (CD2C12, 161.8 MHz, 293 ) delta 66.0 (s, IP, PPh3); “Ci’H} NMR (CD2C12, 100.5 MHz, 293K) delta 136.2 (d, ‘Jpc = 36.0 Hz, VPh3, Ar1), 134.2 (d, VPC = 10.1 Hz, VPh3, Ar2), 129.5 (d, VPC = 1.85 Hz, ?P 3, Ar4), 128.8 (d, VPC = 8.7 Hz, ?Ph3, Ar3), 44.0 (s, CH, Cy1), 43.8 (s, CH, Cy2), 35.0 (s, CH2, Cy3), 33.6 (s, CH2, Cy4).Mass Spectrometry ESI-MS: m/z 569.1186 ([RuCl(NCMe)( 3-c i-tach)(PPh3)l+. Calc 569.1173, 100 %), 528.0919 ([RuCl(K3-c-tach)(PPh3)]+; 528.0907, 25), 246.5607 ([RU(K3-CW- tach)(PPh3)]2+, 246.5608, 10). Infra-Red Spectroscopy ATR-IR: (cm 1) 3462, 3283, 3240, 3050, 2888, 1649, 1588, 1480, 1432 (P-Ph), 1367, 1346, 1270, 1211, 1183, 1156, 1089, 1027, 968, 905. Elemental Analysis CH2C12 c / % H / % N / % Found 46.25 4.92 6.43 0 51.15 5.37 7.46 1 46.31 4.97 6.48 Table 0.1: CHN Elemental analysis for RuCl2(K3-cw-tach)(PPh3)

With the rapid development of chemical substances, we look forward to future research findings about Dichlorotris(triphenylphosphino)ruthenium (II)

Reference£º
Patent; UNIVERSITY OF YORK; GAMBLE, Aimee, Joanna; LYNAM, Jason, Martin; WALTON, Paul, Howard; WO2013/38134; (2013); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is Dichlorotris(triphenylphosphino)ruthenium (II), as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 15529-49-4, its synthesis route is as follows.,15529-49-4

A solution of RuCl2(PPh3)3 (0.200g; 0.21mmol) and ligand 1 (0.135g; 0.42mmol) in benzene (5mL) was stirred at 60C for 2h under the nitrogen atmosphere. Yellow crystals formed. The precipitate was filtered, washed with a small portion of hexane and dried. (0.154g; 90%). 1H NMR (400MHz, CD2Cl2): delta=11.45 (s, 2H, NH), 7.71-7.60 (m, J=11.6, 7.9Hz, 4H, Ph), 7.60-7.51 (m, J=7.6Hz, 2H, Ph), 7.52-7.43 (m, J=6.5Hz, 4H, Ph), 7.39-7.33 (m, 8H, ArH and CH), 7.34-7.26 (m, 4H, Ph), 7.26-7.17 (m, J=7.3Hz, 4H, Ph), 7.03-6.92 (m, J=5.4Hz, 6H, Ph), 6.81-6.70 (m, J=7.3Hz, 4H, Ph), 6.40-6.28 (m, J=8.7Hz, 6H, Ph), 3.77-3.61 (m, 2H, CH2), 3.45-3.31 (m, 2H, CH2), 1.46 (s, 18H, CH3); 13C NMR was not obtained due to the low solubility of this complex; 31P NMR (162MHz, CDCl3): delta=67.9 (s, 2P, ligand 1) ppm; C40H46Cl2N4P2Ru: calcd. C 58.82, H 5.68, N 6.86; found C 58.91, H 5.86, N 6.46.

With the complex challenges of chemical substances, we look forward to future research findings about Dichlorotris(triphenylphosphino)ruthenium (II)

Reference£º
Article; Alshakova, Iryna D.; Korobkov, Ilya; Kuzmina, Lyudmila G.; Nikonov, Georgii I.; Journal of Organometallic Chemistry; vol. 853; (2017); p. 68 – 73;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI