Category: ruthenium-catalysts

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

In a flame dry Schlenk tube 2nd generation Grubbs catalyst(98 mg, 0.11 mmol), CuCl (12.0 mg, 0.12 mmol) and ligand precursor 7 (35.0 mg, 0.11 mmol) were placed. Then, dry DCM was addedunder atmosphere of argon and a mixture was heated to 30 C. The progress of the reaction was monitored by TLC (c-Hex:EtOAc, 2:1).After 20 min the reaction mixture was cooled down to RT and thesolvent was evaporated. Purification by silica-gel chromatography(c-Hex:EtOAc, 10:1, followed by c-Hex:EtOAc, 3:2) yielded brick-redsolid (48%). A single crystal of compound 11 suitable for X-raydiffraction studies was grown at a temperature of 5 C from atrichloromethane/n-hexane solution. 1H NMR (400 MHz, CD2Cl2): delta= 17.9 (s, 1H, Ru]CHAr), 8.50 (d, 1H, J 12.0, Ar-H), 7.87 (dd, 1H,J 16.0, 8.0, Ar-H), 7.45-6.88 (m, 10H, Ar-H), 4.28-4.04 (m, 4H,CH2 2), 2.67-2.34 (br, 15H, CH3 5), 2.01 (s, 3H, CH3); 13C NMR(125 MHz, CD2Cl2): delta=303.9, 210.9, 142.8, 140.3, 136.8, 134.5, 132.7,130.5, 129.5, 128.7, 128.0, 125.7, 125.0, 123.0, 116.6, 77.5, 52.2, 51.1,20.9, 19.9, 19.8, 18.4, 17.6; IR (film from CH2Cl2): n 2913, 1607,1481, 1414,1258, 1013, 924, 849, 806, 763, 645, 576, 552 cm1; Anal.Calcd. for C34H36BrCl2N4ORu: C, 53.13; H, 4.72; N, 7.29; Found: C,53.81; H, 4.76; N, 7.27, m/z 791.0, [MNa]., 246047-72-3

As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Reference£º
Article; Szwaczko, Katarzyna; Czelu?niak, Izabela; Grela, Karol; Journal of Organometallic Chemistry; vol. 847; (2017); p. 146 – 153;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

15529-49-4, Compound 5 (300.0 mg, 0.68 mmol) and degassed morpholine (10 mL) were placed in a 100-mL Young-Schlenk container substituted with argon gas. Thereafter, the Young-Schlenk container was placed in an oil bath, and heated to 120 C. while stirring the components in the Young-Schlenk container, thereby causing a reaction. The progress of the reaction was confirmed by thin-layer chromatography (TLC), and the heating was stopped after two hours. Subsequently, the morpholine in the reaction mixture restored to room temperature (25 C.) was removed after collection with a liquid nitrogen trap under reduced pressure (0.1 to 2 mmHg). At this time, the reaction mixture was sufficiently stirred, and the Young-Schlenk container was immersed in water at room temperature (25 C.) to prevent cooling of the Young-Schlenk container by the heat of vaporization. After sufficiently removing the morpholine, dichlorotris(triphenylphosphino)ruthenium (II) (648.6 mg, 0.68 mmol) and dehydrated toluene (15 mL) were added while introducing argon gas into the container, and the mixture was heated to 110 C. using an oil bath, thereby causing a reaction. The heating was stopped after two hours, and the reaction mixture was restored to room temperature (25 C.). Subsequently, dehydrated hexane (40 mL) was added to the reaction mixture in an argon gas atmosphere. Thereafter, the whole mixture, including the hexane layer and the toluene layer, in the Young-Schlenk container was stirred and completely mixed. After leaving the mixture unattended for an hour, the generated purple substance was filtered out in an argon atmosphere while being washed with dehydrated diethylether, thereby obtaining a crude product. Subsequently, the resulting crude product was subjected to column chromatography (developing solvent: chloroform/ethyl acetate=5/1) in which silica gels are accumulated to about 10 cm, thereby removing a compound with high polarity. The effluent was collected to a flask and the collection was continued until the color of the purple liquid was slightly diluted. After this operation, the solution collected in the recovery flask was rapidly concentrated by an evaporator, thereby obtaining 204.3 mg (0.35 mmol, 51%)of substantially pure Compound 2b (RUPIP2) as a purple substance. The spectral data of Compound 2b (RUPIP2) is shown below. 1H NMR (600 MHz, CDCl3): delta 7.89 (d, 2H, J=8.3 Hz, C10H6N2), 7.69 (t, 2H, J=7.6 Hz, C10H6N2), 7.59 (d, 2H, J=8.3 Hz, C10H6N2), 3.89 (d, 4H, J=7.6 Hz, PCH2), 2.67-2.78 (m, 4H, CH(CH3)2), 1.35-1.43 (m, 24H, CH(CH3)2). 13C NMR (151 MHz, CDCl3): delta 163.3, 158.3, 134.4, 121.9, 120.0, 42.1 (d, 1JPC=20.2 Hz), 25.4, 20.5, 19.4. 31P{1H} NMR (243 MHz, CDCl3): delta 60.6. HRMS (ESI, (M-Cl)+) Calcd for C24H38ClN2P2Ru+: 553.1242. Found m/z=553.1240.

As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

Reference£º
Patent; National University Corporation Nagoya University; Saito, Susumu; Noyori, Ryoji; Miura, Takashi; Naruto, Masayuki; Iida, Kazuki; Takada, Yuki; Toda, Katsuaki; Nimura, Sota; Agrawal, Santosh; Lee, Sunkook; (42 pag.)US9463451; (2016); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A suspension of 1.00 g (1.18 mmol) of [RuCl2(PCy3)(ImH2Mes)(phenylmethylene)](commercially available from Sigma- Aldrich Inc., St. Louis, USA), 0.13 g (1.30 mmol) of copper chloride and 0.38 g (1.30 mmol) oflambda/-phenyl-2-[((E,Z)-2-propenyl)-phenoxy]- propionamide as a 4:1 mixture ofE/Z-isomers in 75 ml of dichloromethane was stirred for 30 min at 400C. The reaction mixture was evaporated to dryness at 400C/ 10 mbar. The residue was stirred in 75 ml of ethyl acetate for 30 min at room temperature. The dark green suspension was filtered and the filtrate was evaporated to dryness at 40C/10 mbar. The crude title product was purified by silica gel chromatography (cyclohexane/ethyl acetate 4:1) to yield 0.75 g (88% yield) of the title compound as a green powder.MS: 731.1 (M+). Anal, calcd. for C37H4ICl2N3O2Ru ? V3 C6Hi2: C, 61.65; H, 5.97; N, 5.53; Cl, 9.33. Found: C, 61.83; H, 6.71; N, 5.35; Cl, 8.93.

246047-72-3, 246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; WO2009/124853; (2009); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 246047-72-3, its synthesis route is as follows.,246047-72-3

After a 50 mL two-necked flask was replaced by argon, the ligand 3cr (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with an argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to produce sand after filtration. The crude product was obtained by silica gel column chromatography and was then washed with methanol or pentane-DCM to obtain 4cr as a green solid product in a yield of 59%.

With the complex challenges of chemical substances, we look forward to future research findings about (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

The catalyst precursor 620g and alkenyl ligands340g was added to a 10L reactor was added dichloromethane solvent 5L, cuprous chloride was added 150g, it was heated under nitrogen at 30 until starting material disappeared the reaction was cooled to room temperature, filtered impurities.The filtrate was distilled off under reduced pressure and toluene was added 100mL of methylene chloride and methanol to precipitate the product catalyst 5L solid was filtered and dried to give the final catalyst 330g, 65% yield.

246047-72-3, As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Reference£º
Patent; Shanghai Keqin Technology Co., Ltd.; Zhang Wei; Wu Jiang; Zhu Chunyin; (26 pag.)CN106939026; (2017); A;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4, it is a common heterocyclic compound, the ruthenium-catalysts compound, its synthesis route is as follows.,15529-49-4

Wilkinson prepared cis-RuCl2(PPh3)2(NCPh)2 by the reaction of RuCl2(PPh3)3 with NCPh in acetone and characterized it by elemental analysis and infrared spectroscopy [1]. In our hands this compound can also be obtained by the reaction in toluene. A 0.099 g (0.10 mmol) sample of RuCl2(PPh3)3 was added to 0.032 mL (0.033 g, 0.32 mmol) of NCPh in 2 mL toluene. The resulting mixture was stirred rapidly for several seconds and immediately filtered. After 3-6 h at room temperature yellow crystals began to form. After about 24 h the supernatant was removed and the yellow crystalline RuCl2(PPh3)2(NCPh)2 was dried under vacuum to yield 0.093 g (0.10 mmol, 100%) of RuCl2(PPh3)2(C7H5N)2, m.p. = 186.5-187.9 C (dec), IR(KBr (cm-1): 3052 m, 2240 m, 2230 m, 2216 m, 1431 s, 1259 w, 1085 m, 1023 w, 740 s, 692 s, 512. 31P NMR (CDCl3): 25.6 s. X-ray quality crystals were obtained from a similar reaction that took place in an NMR tube in d-toluene.

With the rapid development of chemical substances, we look forward to future research findings about Dichlorotris(triphenylphosphino)ruthenium (II)

Reference£º
Article; Cruz, Santina S.; Amenta, Donna S.; Gilje, John W.; Yap, Glenn P.A.; Polyhedron; vol. 114; (2016); p. 179 – 183;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4, it is a common heterocyclic compound, the ruthenium-catalysts compound, its synthesis route is as follows.,15529-49-4

A mixture of HL1 (80mg, 0.20mmol), triethylamine (20mg, 0.20mmol) and 1[Ru(PPh3)3Cl2] (192mg, 0.20mmol) were stirred in tetrahydrofuran (20mL) for 6h at room temperature, during which the color of solution changed from brown to dark red. After removal of solvents in vacuo, dichloromethane (20mL) was added and the solution was filtered. The filtrate was concentrated and the residue was washed with diethyl ether (5mL¡Á2) and hexane (5mL¡Á2) to give the desired product. Recrystallization from dichloromethane/hexane (1:3) afforded dark red block crystals of [Ru(L1)(PPh3)2Cl] (1) suitable for X-ray diffraction in three days. Yield: 140mg, 66% (based on ruthenium). IR (KBr disc, cm-1): nuC=N 1568 (m), nuC-O 1304 (s), nuC-S 744 (w), nuPPh3 1433(m), 1091(s) and 694 (w), nuC-Br 564 and 529 (s); 31P NMR (CDCl3, 162MHz): delta 17.0 (s, PPh3) ppm. 1H NMR (CDCl3, 400MHz): delta 9.82 (s, 1H, CH=N), 7.91-7.52 (m, 30H, PPh3), 7.21-7.10 (m, 2H, Ar-H), 6.35-6.20 (m, 4H, Ar-H), 2.17 (s, 3H, SCH3) ppm. MS (FAB): m/z 1061 [M+], 1026 [M+-Cl], 799 [M+-PPh3], 537 [M+-2PPh3], 513 [Ru(L1)]+. Anal. Calc. for C50H40NOP2ClBr2SRu: C, 56.59; H, 3.80; N, 1.32%. Found: C, 56.54; H, 3.83; N, 1.36%.

As the rapid development of chemical substances, we look forward to future research findings about 15529-49-4

Reference£º
Article; Ji, Jiao; Chen, Xin; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 494; (2019); p. 105 – 111;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

Example 9: Dichloro[2-(diphenylphosphino)-N-(2-(methylthio)benzyl)ethanamine]ruthenium(ll) (9) Under argon NaBH4 (0.13 g, 3.47 mmol) is added to a solution of 2-(diphenylphosphino)-N- (2-(methylthio)benzylidene)ethanamine (0.42 g, 1.16 mmol) in ethanol (7 ml). After stirring for 20 h at 80 C the reaction mixture is cooled to room temperature and DCM (10 ml) is added, followed by saturated aqueous NH4Cl-solution. The phases were separated and 5 the organic phase is washed twice with water and once with brine. The organic phase is dried over MgSO4, filtered and concentrated under vacuo. Ligand 2-(diphenylphosphino)- N-(2-(methylthio)benzyl)ethanamine is obtained as a yellow liquid (0.36 g, 86%). Analytical data: 1H-NMR (400 MHz, CDCl3): 7.76 (m, 1H), 7.44 (m, 4H), 7.34 (m, 6H), 7.24 (m, 2H), 7.12 (m, 1H), 3.86 (s, 2H), 2.81 (m, 2H), 2.49 (s, 3H), 2.34 (m, 2H), 1.75 (bs, 1H). 13C-NMR (400 MHz, CDCl3): 138.89, 138.25, 137.70, 133.13, 129.29, 128.95, 128.82, 128.05, 126.09, 125.31, 51.88, 46.43, 29.48, 16.17. 31P-NMR (500 MHz, CDCl3): -20.60 (s, IP). GC/MS: 350 (16%, [M-15]+), 318 (40%), 200 (26%), 183 (32%), 166 (11%), 152 (19%), 137 (100%), 121 (33%), 15 108 (36%), 91 (25%), 77 (13%), 45 (28%). Under argon dichlorotris(triphenylphosphine)ruthenium(ll) (0.94 g, 0.99 mmol) is added to a solution of 2-(diphenylphosphino)-N-(2-(methylthio)benzyl)ethanamine (0.36 g, 0.99 mmol) in toluene (20 ml). After stirring for 19 h at 110 C the reaction mixture is cooled to room temperature and evaporated under vacuo to a volume of 5 ml. To this suspension 20 hexane (20 ml) is added. After stirring for 15 min the suspension is filtered and washed with hexane (4 ml) and diethyl ether (2 x 4 ml). The light-brown filter cake is dried under vacuo for 19 h and then suspended in diethyl ether (5 ml). After stirring for 15 min the suspension is filtered, washed with diethyl ether (3 x 1 ml) and the filter cake is dried under vacuo. Complex 9 is obtained as a light-brown solid (0.76 g, 96%). Analytical data: 1H-NMR (400 MHz, CDCl3): 7.80 (m, 6H), 7.69 (m, 1H), 7.47 (m, 3H), 7.31-7.01 (m, 17H), 6.88 (dt, 7=2.02, 7.58, 1H), 7.18 (d, 7=7.33, 1H), 5.48 (bs, 1H), 5.23 (d, 7=12.63, 1H), 4.11 (m, 1H), 3.89 (m, 1H), 3.00 (m, 1H), 2.07 (m, 1H), 1.12 (m, 1H), 1.08 (s, 3H). 31P-NMR (500 M Hz, CDCl3): 49.83 (d, 7=27.74, 1P), 37.96 (d, 7=27.74, 1P). Anal, calcd. for C40H39Cl2NP2R11S: C, 60.07 %; H, 4.92 %; N, 1.75 %. Found : C, 60.36 %; H, 4.79 %; N, 1.47 %., 15529-49-4

The synthetic route of 15529-49-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; GIVAUDAN SA; GEISSER, Roger Wilhelm; OETIKER, Juerg Daniel; SCHROeDER, Fridtjof; WO2015/110515; (2015); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

Grubbs second generation catalyst (100 mg, 0.118 mmol) andacrylonitrile (25 mg, 0.472 mmol) were stirred in toluene (5 mL) for15 h at room temperature. After removal of volatiles by evacuation,the brown powder was washed with pentane (3 ¡Á 5 mL) and driedunder vacuum, affording 7-CN as a brown solid in a 80% yield, 246047-72-3

246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Article; Vancompernolle, Tom; Vignon, Paul; Trivelli, Xavier; Mortreux, Andre; Gauvin, Regis M.; Catalysis Communications; vol. 77; (2016); p. 75 – 78;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4, it is a common heterocyclic compound, the ruthenium-catalysts compound, its synthesis route is as follows.,15529-49-4

To Hpytol (0.12 g,0.5 mmol) in methanol (10 mL), [RuCl2(PPh3)3] (0.23 g, 0.25 mmol) in methanol (5 mL) was added. The reaction was carried out in presence of Et3N (0.05 mL, 0.5 mmol). The mixture was heated under reflux for 1.5 h, during which a deep red precipitate was obtained. It was filtered off, washed with methanol and ether, then dried in vacuo, Yield, 88%; mp 300 C. LM inCH2Cl2 3 U1 cm2 mol1. Elemental Anal. Calcd. ForC66H60N4O4RuP2: C, 69.7; H, 5.3; N, 4.9%. Found: C, 69.5; H, 5.0; N,4.8%. IR (KBr, cm1): n (OeH) 3407(m,b), n (C]N) 1625, n (CeO)1285(s), n(PPh3) 1091(s), n(RueO) 522(m), n (RueN) 460 (m). 1HNMR (DMSO-d6,d/ppm): 8.57 (HC]N), 1H, s); 8.1(H6), 1H, s);7.33e7.44 (Ph-H, 4H, m); 5.07 (CH2, 2H, s); 4.37 (OHCH2OH, 1H, s);2.3 (CH3, 3H, s).

As the rapid development of chemical substances, we look forward to future research findings about 15529-49-4

Reference£º
Article; Elsayed, Shadia A.; Noufal, Aya M.; El-Hendawy, Ahmed M.; Journal of Molecular Structure; vol. 1144; (2017); p. 120 – 128;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI