Category: ruthenium-catalysts

10049-08-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Ruthenium(III) chloride, cas is 10049-08-8,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

[(1S,3R)-1-(Methoxycarbonylamino-methyl)-3-methyl-cyclopentyl]-acetic acid ((1S,3R)-1-Benzyl-3-methyl-cyclopentylmethyl)-carbamic acid methyl ester (2.6 g, 9.9 mmol) and sodium periodate (29.8 g, 140 mmol) were stirred together in carbon tetrachloride (30 mL), acetonitrile (30 mL), and water for 6 hours. The mixture was cooled to 0¡ã C., and ruthenium(III) chloride (0.04 g, 0.2 mmol) was added to the reaction mixture. The reaction was allowed to warm to room temperature and stirred for 20 hours. Diethyl ether (50 mL) was added, and the mixture was then extracted with saturated aqueous sodium hydrogen carbonate (200 mL). The aqueous layer was acidified to pH 1 with 4N hydrochloric acid and re-extracted with ethyl acetate (200 mL), dried (MgSO4), and the solvent was evaporated under reduced pressure. The residue was purified by chromatography (silica gel, eluding with a gradient of heptane to 1:1 heptane:ethyl acetate) to give 0.32 g (14percent) of [(1S,3R)-1-(methoxycarbonylamino-methyl)-3-methyl-cyclopentyl]-acetic acid; Rf (heptane-ethyl acetate, 8:2) 0.30; IR thin film (cm-1) 3338 (NH), 1712 (C=O); 1H-NMR (400 MHz; CDCl3): delta 9.29 (1H, s, COOH), 5.17 (1H, bs, NH), 3.71 (3H, s, OMe), 3.30 (1H, dd, J 14.4, 7.1, CHAHBNH2), 3.17 (1H, dd, J 14.4, 6.6, CHAHBNH2), 2.37 (2H, s, CH2COOH), 2.20-1.00 (7H, m), 1.01 (3H, d, J 6.4, CHMe); MS (ES+) m/z 230 (M+H, 63percent), 481 (M+Na,100).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Ruthenium(III) chloride, 10049-08-8

Reference£º
Patent; Bryans, Justin Stephen; Blakemore, David Clive; Williams, Sophie Caroline; US2003/69438; (2003); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

301224-40-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, cas is 301224-40-8,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

2.0 g of catalyst RuCl2(sIMes)(CH-o-CPrO)C6H4) (C627) (3.2 mmol) and 1.46 g of sIMes (4.8 mmol) were placed in a round bottomed flask under nitrogen, in 10 ml of anhydrous toluene. The reaction mixture was heated in a water bath at 45 C and stirred for 3 h and another 16 h at room temperature. The formed suspension was filtered and washed with MeOH. C933Bis was obtained as a light pink solid in 40% yield. Purity: 99+% by HPLC. NMR (CD2CI2): delta 20.04 (s, 1 H), 8.46 (d, J = 10 Hz, 1 H), 7.17 (t, J = 8 Hz, 1 H), 7.1 – 6.3 (b, 6 H), 6.40 (t, J = 7 Hz, 1 H), 6.21 (d, J = 8 Hz, 1 H), 6.1 – 5.7 (b, 2 H), 4.07 (septet, J = 6 Hz, 1 H), 3.7 – 3.3 (b, 8 H), 2.7 – 1.7 (b, 36 H), 1.48 (d, J = 6 Hz, 6 H). 13C NMR (CD2CI2): delta 289.16 (m, Ru=CH), 220.80, 148.12, 142.58, 139.0 – 135.0 (b, m), 134.43, 130.15 (b), 129.33, 119.53, 119.78, 70.08, 55.0 – 52.0 (b), 23.40, 21.46, 19.47, 20.0 – 18.0 (b).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, 301224-40-8

Reference£º
Patent; MATERIA, INC.; WANG, Li-sheng; TRIMMER, Mark, S.; (86 pag.)WO2018/35319; (2018); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

50982-12-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichloro(cycloocta-1,5-diene)ruthenium(II), cas is 50982-12-2,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

Next, 31.56 g of this (eta-1,5-cyclooctadiene)ruthenium(II) dichloride, 34.97 g of sodium carbonate, 28 mL of 2,4-pentanedione and 100 mL of N,N-dimethylformamide were placed in a nitrogen-flushed three-neck flask and stirred at 140 C. for 1 hour. Following reaction completion, the solution was cooled to room temperature, then alumina column chromatography (developing solvent: diethyl ether) was carried out. The resulting solution was concentrated, after which 120 mL of water was added and the solution was left at rest for 3 hours. The crystals that precipitated out were collected by filtration, and after being washed with water, were dried in vacuo. 46.53 g of bis(2,4-pentanedionato)(eta-1,5-cyclooctadiene)ruthenium(II) was obtained as an orangey-yellow solid. The yield was 94 wt %.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Dichloro(cycloocta-1,5-diene)ruthenium(II), 50982-12-2

Reference£º
Patent; JSR Corporation; US2012/282414; (2012); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

It is a common heterocyclic compound, the ruthenium-catalysts compound, Dichloro(cycloocta-1,5-diene)ruthenium(II), cas is 50982-12-2 its synthesis route is as follows.

Dichloro(1,5-cyclooctadiene)ruthenium (4.0 g, 0.014 moles), tricyclohexylphosphine (8.4 g, 0.030 moles), degassed triethylamine (2 mL), and degassed sec-butanol (60 mL) were combined in a pressure bottle under argon. The pressure bottle was purged with hydrogen gas, pressurized to 60 psi, and the mixture heated to 80 C. for 18 hours (the bottle was repressurized as needed to maintain 60 psi hydrogen). The reaction mixture was then allowed to cool down and the hydrogen gas was vented off. Degassed methanol (60 mL) was added to the orange slurry and the filtrate decanted off via stick filtration under argon to leave an orange solid in the bottle, which was washed with degassed methanol (60 mL). Degassed toluene (60 mL) was added to the orange solid and the orange slurry cooled to 0 C. Degassed 3-chloro-3-methyl-1-butyne (1.7 mL, 0.015 moles) was added dropwise via syringe at 0 C. The orange slurry progressively turned to a maroon slurry, while gas bubbled away. The mixture was stirred at room temperature for 2 hours after addition was complete. Ligand precursor [ 2] (18 g, 0.102 moles) was then charged and the mixture was heated to 80 C. and sparged with argon for 3 days (degassed toluene was added as needed). The brown slurry was allowed to cool to room temperature and a mixture of 30 mL methanol and 10 mL of concentrated hydrochloric acid was added in air with mixing. After stirring for 15 minutes at room temperature, the two phases were allowed to separate and the methanol phase was decanted off. Trituration with methanol (2¡Á50 mL) gave a solid, which was collected on a frit and washed with more methanol (2¡Á20 mL). The brown solid was then washed with hexanes (2¡Á20 mL) and dried to give [ 8] (5.1 g, 0.085 moles) in 61% yield.

50982-12-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,50982-12-2 ,Dichloro(cycloocta-1,5-diene)ruthenium(II), other downstream synthetic routes, hurry up and to see

Reference£º
Patent; MATERIA, INC.; Pederson, Richard L.; Woertink, Jason K.; Haar, Christopher M.; Gindelberger, David E.; Schrodi, Yann; (13 pag.)US9504997; (2016); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

50982-12-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichloro(cycloocta-1,5-diene)ruthenium(II), cas is 50982-12-2,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

The catalyst precursor, preferably [RuCI2(COD)]m (1 eq.), 1 ,4-bis(diphenylphosphino)butane (1 .0-1 .2 eq., preferably 1 .0 eq.) and 2- quinolinylmethylamine (1.0-1 .4 eq., preferably 1.225 eq.) were dissolved in one of the above mentioned solvents, preferably cyclohexanone (10- 20 ml/g Ru-precursor, preferably 20 ml/g). The mixture was heated at 130 C for 1 hour and then cooled to ambient temperature. The solid precipitate was filtered off and washed with the same solvent that was used for the reaction. A person skilled in the art can determine the cis-/trans- isomeric ratio by NMR. The diastereomeric ratios generated by this method are usually in the range of d.r. (diastereomeric ratio) >98% towards the cis isomer. The same results can be achieved starting with [RuCI2(dmso-KS)3(dmso-KO)], [RuCI2(dmso-KS)4]or [RuCI2(bicyclo[2.2.1]hepta-2,5-diene)]m as precursor

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Dichloro(cycloocta-1,5-diene)ruthenium(II), 50982-12-2

Reference£º
Patent; SYNGENTA PARTICIPATIONS AG; LOTHSCHUETZ, Christian; SAINT-DIZIER, Alexandre Christian; WO2014/166777; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

50982-12-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Dichloro(cycloocta-1,5-diene)ruthenium(II), cas is 50982-12-2,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The following common procedure was followed for the synthesesof complexes 1-5: A mixture of the ligand (0.36 mmol) and Ru(1,5-cod)Cl2(0.36 mmol) was dissolved in dry ethanol (10 ml) and the resultingmixture was refluxed for 2 h. The reaction volume was concentratedto a third of its original volume and the suspension was keptat 4 C overnight to give brick red solid which was filtered off,washed with cold ethanol and then diethyl ether. The solid wasdissolved in chloroform and excess of n-hexane was added toinduce the precipitation of the brick red solid product.

The chemical industry reduces the impact on the environment during synthesis,50982-12-2,Dichloro(cycloocta-1,5-diene)ruthenium(II),I believe this compound will play a more active role in future production and life.

Reference£º
Article; Thangavel, Saravanan; Rajamanikandan, Ramar; Friedrich, Holger B.; Ilanchelian, Malaichamy; Omondi, Bernard; Polyhedron; vol. 107; (2016); p. 124 – 135;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

246047-72-3, A 50 mL two-necked flask was purged with argon and then the ligand 7q (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with an argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After completion of the reaction, silica gel was added to the filtrate after filtration, and the crude product was obtained by silica gel column chromatography, and then washed with methanol or pentane-DCM to obtain a green solid product 8q. Yield: 59%.

As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

General procedure: 1c (154 mg, 519 lmol) and [RuCl2(PPh3)3] (498 mg,519 lmol) were dissolved in CHCl3 (3 mL). The orange solutionwas stirred for 10 min at room temperature and then filteredthrough Celite. After four days, orange crystals, suitable for single-crystal X-ray diffraction, were obtained by vapor diffusion ofEt2O into the filtrate. The supernatant was decanted, the solidwas washed with Et2O (2 mL) and dried in vacuo. Yield: 312 mg(343 lmol, 66%).

15529-49-4, The synthetic route of 15529-49-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Gericke, Robert; Wagler, Joerg; Polyhedron; vol. 125; (2017); p. 57 – 67;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A 50 ml three-necked flask equipped with a stirring reflux device was charged with 1 mmol of 2-diphenylphosphineaniline,1.1 mmol of p-methylbenzyl alcohol, 1 mmol of 2-diphenylphosphinophenyl ether, 1 mmol of RuCl2 (PPh3) 3, 1.4 mmol of triethylamine and 20 ml of dioxane were added and the mixture was heated at 110 C for 12 h under a nitrogen atmosphere.After cooling and filtering, the resulting solid was recrystallized from a mixed solvent of CH 2 Cl 2 and petroleum ether to give product 14 in a yield of 86%.

15529-49-4, 15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Patent; Luoyang Normal College; Li Hongmei; Xu Chen; Zu Enpu; Xiao Zhiqiang; Han Xin; (12 pag.)CN104804048; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 52 Synthesis of Ru complex 6a To a 50 mL two-necked round bottom flask, after filling with Ar atmosphere, were added ligand 5a (l .Ommol) and CuCl (3.0mmol, 3eq) and 30 mL dry DCM, followed by refilling with Ar three times and protected with Ar balloon in close system. Ru complex lb (l.Ommol) was added under Ar protection, and the mixture was stirred for 0.5 hr at room temperature. After the reaction was complete, the solution was filtered and the filtrate was concentrated and slurred with silica gel. The crude was obtained by silica gel column chromatography and washed with methanol or pentane-DCM to obtain 453mg of yellow-green solid product 6a, yield: 79%. Ru complex (6a) 1HNMR (400 MHz, CDC13): delta 18.53 (s, 1H, Ru=CH), 8.59 (s, 1H), 7.28-6.49 (m, 11H), 4.160 (s, 4H, NCH2CH2N), 2.50 (s, 12H), 2.42 (s, 6H)., 246047-72-3

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ZANNAN SCITECH CO., LTD.; ZHAN, James Zheng-Yun; WO2011/79439; (2011); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI