Category: ruthenium-catalysts

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A 50 mL two-necked flask was purged with argon and the ligands 3cy (10mmol), CuCl (30mmol, 3eq) and 30mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to produce sand after filtration. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain 4cy green solid product in a yield of 70%.

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

RuCl2 (PPh3) 3 (800 mg, 0.83mmol) and (1R, 2R) -1, 2-diphenylethylenediamine (195 mg, 0.92 mmol) are weighed and charged into a 20-mL Schlenk flask. The flask was reduced pressure to degas therein and then nitrogen gas was introduced into the flask. Dichloromethane (8 mL) was added thereto through a syringe, and the mixture was stirred under nitrogen atmosphere at room temperature for 3 hours. The reaction solution was then Celite-filtered, and the Celite layer was washed with dichloromethane (2mL). The filtrate obtained was concentrated under reduced pressure to a volume of about 2 mL; hexane (16 mL) was added thereto; and the mixture was stirred at room temperature for 1 hour. The precipitate was collected by filtration under nitrogen atmosphere, and the powder obtained was dried under reduced pressure (1 mmHg), to give 531 mg of a desired product (yield: 70%).

15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Patent; Takasago International Corporation; EP1970360; (2008); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

A 50 mL two-necked flask was purged with argon and then the ligand 7e (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with an argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to produce sand. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain a green solid product 8e with a yield of 74%.

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

To a dry 100 mL round-bottom flask containing a magnetic stirbar, under argon, was added 1.79 g (2.1 mmol, 1.0 equiv) [5], CuCl (521 mg, 5.28 mmol, 2.51 equiv), and 25 mL of anhydrous CH2Cl2. Ligand precursor [2] (403 mg, 2.1 mmol, 1.0 equiv) was added to the reddish solution in 20 mL of CH2Cl2 at room temperature. A reflux condenser was added and the mixture was heated for 70 minutes, under argon. The crude product was concentrated and loaded onto silica gel and eluted with 2:1 pentane:CH2Cl2 then 1:1 pentane:CH2Cl2 to remove a dark green band. The column was washed with CH2Cl2, then Et2O. The green and yellow bands were combined and concentrated under reduced pressure to yield a dark green solid. The solvents are removed under reduced pressure and the solid was crystallized from hexane to yield 1.07 g (1.70 mmol, 85%) of [6]. 1H NMR (300 MHz, CDCl3) delta: 16.56 (s, 1H, Ru=CHAr), 7.48 (m, 1H, aromatic CH), 7.07 (s, 4H, mesityl aromatic CH), 6.93 (dd, J=7.4 Hz, 1.6 Hz, 1H, aromatic CH), 6.85 (dd, J=7.4 Hz, 1H, aromatic CH), 6.79 (d, J=8.6 Hz, 1H, aromatic CH) 4.90 (septet, J=6.3 Hz, 1H, (CH3)2CHOAr), 4.18 (s, 4H, N(CH2)2N), 2.48 (s, 12H, mesityl o-CH3), 2.40 (s, 6H, mesityl p-CH3), 1.27 (d, J=5.9 Hz, 6H, (CH3)2CHOAr. 13C NMR (75 MHz, CDCl3) delta: 296.8 (q, J=61.5 Hz), 211.1, 152.0, 145.1, 145.09, 138.61, 129.4 (d, JNC 3.9 Hz), 129.3, 129.2, 122.6, 122.1, 122.8, 74.9 (d, JOC 10.7 Hz), 51.4, 30.9, 25.9, 21.01.

246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Patent; MATERIA, INC.; Pederson, Richard L.; Woertink, Jason K.; Haar, Christopher M.; Gindelberger, David E.; Schrodi, Yann; (13 pag.)US9504997; (2016); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 3 – Synthesis of the complex 3 according to the invention The commercially available complex G (200 mg, 0.24 mmol) was placed in a flask, to which methylene chloride was added (6 ml). This was followed by adding the compound of the formula: (63 mg, 0.47 mmol) and tricyclohexylphosphine (132 mg, 0.47 mmol). The resulting solution was stirred at a temperature of 40C for 5 hours. The reaction mixture was introduced at the top of a chromatographic column packed with silica gel (eluent: ethyl acetate/cyclohexane, 0 to 10 vol.%). After evaporating the solvents, the complex 3 was obtained as a green solid (140 mg, 72% yield). 3 H NMR (500 MHz, CD2Cl2) delta ppm: 15.85 (s, 1H), 7.07 (s, 1H), 7.00-6.96 (m, 3H), 6.66 (d, J = 8.4 Hz, 1H), 6.44 (dd, J = 7.7, 1.4 Hz, 1H), 6.24 (s, 1H), 6.20 (t, J = 7.2 Hz, 1H), 4.01-3.96 (m, 1H), 3.83-3.70 (m, 2H), 3.64-3.59 (m, 1H), 2.63 (s, 3H), 2.54 (s, 3H), 2.50 (s, 3H), 2.35 (s, 3H), 2.27 (s, 3H), 1.66-1.50 (m, 13H), 1.29 (s, 3H), 1.11-0.70 (m, 20H). 13C NMR: (125 MHz, CD2CI2) delta ppm: 281.36, 222.21, 221.66, 180.31, 148.30, 139.54, 139.17, 138.78, 137.63, 137.32, 136.98, 134.69, 130.23, 130.05, 129.70, 129.00, 122.38, 116.17, 111.26, 32.52, 32.39, 29.45, 28.92, 28.23, 28.15, 28.12, 28.04, 27.34, 27.03, 21.33, 21.14, 19.40, 18.92, 18.66, 16.76. 31P NMR (124.5 MHz, CDCI3) delta ppm: 29.11.

246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Patent; APEIRON SYNTHESIS S.A.; SKOWERSKI, Krzysztof; BIENIEK, Micha?; WO2014/16422; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Under argon dichlorotris(triphenylphosphine)ruthenium(II) (0.94 g, 0.99 mmol) is added to a solution of 2-(diphenylphosphino)-N-(2-(methylthio)benzyl)ethanamine (0.36 g, 0.99 mmol) in toluene (20 ml). After stirring for 19 h at 110 C. the reaction mixture is cooled to room temperature and evaporated under vacuo to a volume of 5 ml. To this suspension hexane (20 ml) is added. After stirring for 15 min the suspension is filtered and washed with hexane (4 ml) and diethyl ether (2¡Á4 ml). The light-brown filter cake is dried under vacuo for 19 h and then suspended in diethyl ether (5 ml). After stirring for 15 min the suspension is filtered, washed with diethyl ether (3¡Á1 ml) and the filter cake is dried u nder vacuo. Complex 9 is obtained as a light-brown solid (0.76 g, 96%). Analytical data: 1H-NMR (400 MHz, CDCl3): 7.80 (m, 6H), 7.69 (m, 1H), 7.47 (m, 3H), 7.31-7.01 (m, 17H), 6.88 (dt, J=2.02, 7.58, 1H), 7.18 (d, J=7.33, 1H), 5.48 (bs, 1H), 5.23 (d, J=12.63, 1H), 4.11 (m, 1H), 3.89 (m, 1H), 3.00 (m, 1H), 2.07 (m, 1H), 1.12 (m, 1H), 1.08 (s, 3H). 31P-NMR (500 MHz, CDCl3): 49.83 (d, J=27.74, 1P), 37.96 (d, J=27.74, 1P). Anal. calcd. for C40H39Cl2NP2RuS: C, 60.07%; H, 4.92%; N, 1.75%. Found: C, 60.36%; H, 4.79%; N, 1.47%.

15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Patent; GIVAUDAN SA; GEISSER, Roger Wilhelm; OETIKER, Juerg Daniel; SCHROeDER, Fridtjof; (17 pag.)US2016/326199; (2016); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

301224-40-8, (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: In a glove box, a flask was charged with Ru complex 4 or 5 and Ag salt 3. Anhydrous degassed CH2Cl2 was then added and the resulting mixture was stirred at room temperature for 3h in the dark. The solids were filtered off through a Celite layer and washed with anhydrous (2mL). The solution was diluted with anhydrous hexane (10mL) and remaining precipitated Ag salt was again filtered off. Evaporation of the solvents on a rotary vacuum evaporator (40C, 1h, 25kPa) and finally at oil pump vacuum (25C, 1h, 1kPa) gave the products 1 or 2. 4.8 [1,3-Bis(2,4,6-trimethylphenyl)imidazolidin-2-ylidene](2-isopropoxybenzylidene)-bis[perfluoro(2-methyl-3-oxahexanoyl)oxy]ruthenium(IV)(1a) (0038) According to the general procedure, silver salt 3a (20mg, 0.047mmol) and complex 4 (HG2, 11.6mg, 0.019mmol) gave the target complex 1a (22mg, 98%, deep violet crystals). 1H NMR (399,94MHz, CD2Cl2): delta 0.95+0.97+0.97 (3¡Ád, 3JH-H=5.9Hz, 6H, OCH(CH3)2), 2.06 (m, 6H, Ar’CH3-p), 2.43 (m, 12H, Ar’CH3-o), 4.09+4.11+4.12 (3¡Ás, 4H, CH2), 4.46 (m, 1H, OCH(CH3)2), 6.63 (m, 1H, ArH), 6.96 (m, 1H, ArH), 7.11 (dd, 3JH-H=7.6Hz, 4JH-H=1.5Hz, 1H, ArH), 7.19 (m, 4H, Ar’H), 7.37 (m, 1H, ArH), 17.58+17.63+17.68 (3¡Ábs, 1H, Ru=CH)ppm. 19F NMR (376.29MHz, CD2Cl2): delta -80.7+(-81.2) (2¡Ádm, 2JF-F=150Hz, 1F, CFFCF2CF3), -81.2+(-81.3)+(-81.6)+(-81.8) (4¡Ám, 4JF-F=13Hz, 3F, CF3CF), -81.5+(-81.7)+(-81.7) (4¡Át, 4JF-F=10Hz, 3F, CF3CF2), -83.5+(-83.6)+(84.4)+(-84.6) (4¡Ádm, 2JF-F=150Hz, 1F, CFFCF2CF3), -128.4+(-128.9) (2¡Ám, 1F, CF3CF), -129.9+(-130.2)+(-130.3) (3¡Ám, 2F, CF3CF2) ppm, 13C NMR (100.58MHz, CD2Cl2): delta 17.0 (m, 4C, Ar’CH3-o), 18.3 (m, 2C, Ar’CH3-p), 19.8+19.9+20.8 (3¡Ás, 2C, OCH(CH3)2), 50.1 (s, 2C, CH2N), 75.0+75.1+75.2 (3¡Ás, 1C, OCH(CH3)2), 106-120 (m, 22C, CF3, CF2, CF), 110.8+111.1+111.3 (3¡Ás, 1C, CArHCArOiPr), 122.2+122.3+122.3 (3¡Ás, 1C, CArH), 123.7+123.8+123.9 (3¡Ás, 1C, CArH), 129.5 (m, 4C, CArH), 130.1+130.2+130.3 (3¡Ás, 1C, CArH), 136.5+137.2+137.4 (3¡Ám, 2C, CAr’CH3), 139.0+140.2+140.7 (3¡Ám, 4C, o-CAr’CH3), 142.6+142.8+143.0 (3¡Ás, 1C, CArCH=Ru), 153.5 (s, 1C, CAr-OiPr), 159.2+159.4+162.8 (3¡Ád, 2JC-F=25Hz, 1C, COO), 209.1+209.3+209.6 (3¡Ás, 1C, NCN), 319.4 (m, CH=Ru)ppm. MS (ESI+) m/z (%): 929.2 [M+Na]+ (100), 731.2 (59), 441.3 (88). HRMS (ESI+): [M+Na]+ calcd. for C39H44F8N2NaO7Ru 929.1956, found 929.1965.

301224-40-8 (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride 11763533, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Article; Lipovska, Pavlina; Rathouska, Lucie; ?im?nek, Ond?ej; Ho?ek, Jan; Kola?ikova, Viola; Ryba?kova, Marketa; Cva?ka, Josef; Svoboda, Martin; Kvi?ala, Jaroslav; Journal of Fluorine Chemistry; vol. 191; (2016); p. 14 – 22;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Grubbs second generation catalyst (100 mg, 0.117 mmol), 2-[(2,4,6-trimethylphenylimino)methyl]phenol (pKa: 8.84+/- 0.30) (0.117 mmol), silver (I) carbonate (16.27 mg, 0.058 mmol), and THF (2 ml) were reacted at room temperature during 2 h. The solvent was evaporated and crude reaction product purified on chromatography column to give an orange-brown complex. Yield 30%.

246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Patent; Telene SAS; EP2151445; (2010); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

A mixture of HL1 (80mg, 0.20mmol), triethylamine (20mg, 0.20mmol) and 1[Ru(PPh3)3Cl2] (192mg, 0.20mmol) were stirred in tetrahydrofuran (20mL) for 6h at room temperature, during which the color of solution changed from brown to dark red. After removal of solvents in vacuo, dichloromethane (20mL) was added and the solution was filtered. The filtrate was concentrated and the residue was washed with diethyl ether (5mL¡Á2) and hexane (5mL¡Á2) to give the desired product. Recrystallization from dichloromethane/hexane (1:3) afforded dark red block crystals of [Ru(L1)(PPh3)2Cl] (1) suitable for X-ray diffraction in three days. Yield: 140mg, 66% (based on ruthenium). IR (KBr disc, cm-1): nuC=N 1568 (m), nuC-O 1304 (s), nuC-S 744 (w), nuPPh3 1433(m), 1091(s) and 694 (w), nuC-Br 564 and 529 (s); 31P NMR (CDCl3, 162MHz): delta 17.0 (s, PPh3) ppm. 1H NMR (CDCl3, 400MHz): delta 9.82 (s, 1H, CH=N), 7.91-7.52 (m, 30H, PPh3), 7.21-7.10 (m, 2H, Ar-H), 6.35-6.20 (m, 4H, Ar-H), 2.17 (s, 3H, SCH3) ppm. MS (FAB): m/z 1061 [M+], 1026 [M+-Cl], 799 [M+-PPh3], 537 [M+-2PPh3], 513 [Ru(L1)]+. Anal. Calc. for C50H40NOP2ClBr2SRu: C, 56.59; H, 3.80; N, 1.32%. Found: C, 56.54; H, 3.83; N, 1.36%.

As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

Reference£º
Article; Ji, Jiao; Chen, Xin; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 494; (2019); p. 105 – 111;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

General procedure: Diphosphine ligand (2.0 mmol) was dissolved in 10 mL of dichloromethane and the solution was added dropwise to a stirred solution of RuCl2(PPh3)3 (1.0 mmol) in 10 mL of dichloromethane. The reaction mixture was stirred approximately for 50 min at room temperature. The brown solution was filtered to remove the insoluble impurities. The solvent was reduced by a vacuum and the product was then precipitated by adding n-hexane. The yellow solid was filtered and washed three times with 20 mL of diethyl ether.

15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Article; Al-Noaimi, Mousa; Warad, Ismail; Abdel-Rahman, Obadah S.; Awwadi, Firas F.; Haddad, Salim F.; Hadda, Taibi B.; Polyhedron; vol. 62; (2013); p. 110 – 119;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI