Ruthenium catalysts

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.246047-72-3, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium An updated downstream synthesis route of 246047-72-3 as follows., 246047-72-3

Grubbs’ second generation catalyst (226 mg, 1 eq) and copper (I) chloride (26 mg, 1 eq) were charged in a Schlenk tube and degassed. A degassed solution of compound C4 (26 mg, 21 eq.) in anhydrous dichloromethane (50 mL) was transferred via cannula to the solid. The mixture was heated at 30 C. for 60 min. The solvent was removed in vacuo and the residue was purified by chromatography on silica gel (PE/EA) to afford compound C5 (202 mg) as a green solid in 100% yield. 31P NMR (CDCl3, 161.8 MHz) delta (ppm) 22.88 (s, 1P); HRMS (ES+): m/z=764 (M+H+).

With the complex challenges of chemical substances, we look forward to future research findings about 246047-72-3,belong ruthenium-catalysts compound

Reference£º
Patent; Idenix Pharmaceuticals, Inc.; Parsy, Christophe Claude; Alexandre, Francois-Rene; Bonnaterre, Florence Marie-Emilie; Surleraux, Dominique; US9115095; (2015); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.50982-12-2, Dichloro(cycloocta-1,5-diene)ruthenium(II) it is a common compound, a new synthetic route is introduced below., 50982-12-2

Separately, 200 ml of well dried tetrahydrofuran was fed to a 500 ml flask whose inside had been substituted by argon, and 5 g of dichloro(cyclooctadienyl)ruthenium was injected into the flask and well mixed with the above tetrahydrofuran to obtain a suspension. This suspension was cooled to -78 C. in a stream of argon, and 15 ml of the above synthesized tetrahydrofuran solution of trifluoromethyl cyclopentadienyl sodium was added dropwise to the suspension over 1 hour. The reaction mixture was further stirred at -78 C. for 3 hours and returned to room temperature under agitation over 12 hours. After the reaction mixture was let pass through a neutral alumina column in a stream of argon to be purified and concentrated, it was purified again by a neutral alumina column to obtain 0.2 g of bis(trifluoromethylcyclopentadienyl)ruthenium (yield rate of 30%)., 50982-12-2

As the paragraph descriping shows that 50982-12-2 is playing an increasingly important role.

Reference£º
Patent; JSR Corporation; US2006/240190; (2006); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) it is a common compound, a new synthetic route is introduced below.

General procedure: To a round-bottomed flask with a stir bar was placed with [Ru(PPh3)3Cl2] (868 mg, 2.0 mmol) under the nitrogen. Pre-dried THF(10 mL) was added and the resulting mixture was stirred at room temperature. Then salen-enH2 (536 mg, 2.0 mmol) and a little excess of Et3N (252 mg, 2.5 mmol) in THF (5 mL) were added. The reaction mixture was stirred at room temperature overnight. After removal of solvents, CH2Cl2 (15 mL) was added and the solution was filtered through cilite. The filtrate was concentrated and the residue was washed with Et2O (5mL 2) and hexane (5 mL 2) to give the desired product. Recrystallization from CH2Cl2/Et2O (1:2) afforded green block-shaped crystals of [RuCl(PPh3)(salen)] (3) suitable for X-ray diffraction in three days. Yield: 1011 mg, 76% (based on Ru).

With the complex challenges of chemical substances, we look forward to future research findings about Dichlorotris(triphenylphosphino)ruthenium (II)

Reference£º
Article; Tang, Li-Hua; Wu, Fule; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 477; (2018); p. 212 – 218;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Adding a certain compound to certain chemical reactions, such as: 246047-72-3, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 246047-72-3, 246047-72-3

After a 50 mL two-necked flask was purged with argon, the ligand 3be (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to produce sand after filtration. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain 4be green solid product in a yield of 48%.

246047-72-3, The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.50982-12-2, Dichloro(cycloocta-1,5-diene)ruthenium(II) it is a common compound, a new synthetic route is introduced below., 50982-12-2

50982-12-2, The catalyst precursor, preferably [RuCI2(COD)]m (1 eq.) (COD = cis,cis-cycloocta-1 ,5 diene), 1 ,4-bis(diphenylphosphino)butane (1.0-1 .2 eq., preferably 1.0 eq.) and 2-picolylamine (1 .0-1.4 eq., preferably 1.225 eq.) were dissolved in one of the above mentioned solvents, preferably methyl isobutylketone (10-20 ml/g Ru-precursor, preferably 20 ml/g). The mixture was heated to reflux for 3 – 5 hours and then cooled to ambient temperature. The solid precipitate was filtered off and washed with the same solvent that was used for the reaction. A person skilled in the art can determine the cis-/trans- isomeric ratio by NMR. The diastereomeric ratios generated by this method are usually in the range of d.r. (diastereomeric ratio) >98% towards the cis isomer. The same results can be achieved starting with [RuCI2(dmso-KS)3(dmso-KO)], [RuCI2(dmso-KS)4]or [RuCI2(bicyclo[2.2.1 ]hepta- 2,5-diene)]m as precursor

As the paragraph descriping shows that 50982-12-2 is playing an increasingly important role.

Reference£º
Patent; SYNGENTA PARTICIPATIONS AG; LOTHSCHUETZ, Christian; SAINT-DIZIER, Alexandre Christian; WO2014/166777; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, Adding a certain compound to certain chemical reactions, such as: 246047-72-3, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 246047-72-3

Under an argon atmosphere a carbene complex of formula 5.II, wherein L represents a NHC ligand of formula 6a.II (153 mg, 0.18 mmol),and anhydrous CuCl (18 mg, 0.18 mmol) were placed in a Schlenck tube. Then dry, deoxygenated CH2C12 (10 ml) was added followed by a solution of compound 2.1 (38 mg, 0.18 mmol) in CH2C12 (4 ml). The resulting suspension was stirred at 30C for 1 h, thereafter it was concentrated in vacuum, and purified by silica-gel column chromatography (cyclohexane / EtOAc 5:2). After removal of solvent and washing with small amount of dry n-pentane complex 1.II, wherein Mes has the meaning of a mesityl group, was obtained as green, microcrystalline solid (100 mg, 83% of yield). Rf = 0.30 (hexane/EtOAc8:2);XH-NMR (500 MHz, CD2Cl2): delta[ppm]= 16.42 (s, 1H), 8.46 (dd, 1H, J = 9.1, 2.5 Hz), 7.80 (d, 1H, J = 2.5 Hz), 7.10 (s, 4H), 6:94 (d, 1H, J = 9.1 Hz), 5.01 (sept, 1H, J = 6.1 Hz), 4.22 (s, 4H), 2.47 (2s, 18H), 1.30 (d, 6H, J = 6.1 Hz); 13C-NMR (125 MHz, CD2Cl2): delta;[ppm]= 289.1, 208.2,156.8, 150.3, 145.0, 143.5, 139.6,139.3,129.8, 124.5,117.2,113.3, 78.2, 52.0, 21.3, 21.2,19.4; IR (KBr): nu [cm-1] = 2924, 2850,1606,1521,1480,1262, 1093, 918,745; MS (ESI): m/z 636 [M-CI]+; HRMS(EI): m/z calculated for C31H37N3O3Ru: [M+.] 671.1255, found 671.1229; Elemental analysis, calculated: (%) for C31H37N3O3Ru (671.63): C 55.44, H 5.55, N 6.26; found: C 55.35; H 5.70, N 6.09., 246047-72-3

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Adding a certain compound to certain chemical reactions, such as: 246047-72-3, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 246047-72-3, 246047-72-3

Grubbs second generation catalyst (100 mg, 0.118 mmol) andacrylonitrile (25 mg, 0.472 mmol) were stirred in toluene (5 mL) for15 h at room temperature. After removal of volatiles by evacuation,the brown powder was washed with pentane (3 ¡Á 5 mL) and driedunder vacuum, affording 7-CN as a brown solid in a 80% yield

As the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

Reference£º
Article; Vancompernolle, Tom; Vignon, Paul; Trivelli, Xavier; Mortreux, Andre; Gauvin, Regis M.; Catalysis Communications; vol. 77; (2016); p. 75 – 78;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 246047-72-3, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium This compound has unique chemical properties. The synthetic route is as follows. 246047-72-3

Example 5 Synthesis of the Complex 4 According to the Invention [0081] The commercially available complex G (200 mg, 0.24 mmol) was placed in a flask, to which methylene chloride was added (6 ml). This was followed by adding the compound of the formula: (78 mg, 0.47 mmol) and tricyclohexylphosphine (132 mg, 0.47 mmol). The resulting solution was stirred at a temperature of 40 C. for 1 hour. The reaction mixture was introduced at the top of a chromatographic column packed with silica gel (eluent: ethyl acetate/cyclohexane, 0 to 10 vol. %). After evaporating the solvents, the complex 4 was obtained as a brown solid (104 mg, 50% yield). [0082] 1H NMR (500 MHz, CD2Cl2) delta ppm: 16.42 (s, 1H), 8.00 (dd, J=9.3, 2.7 Hz, 1H), 7.53 (d, J=2.7 Hz, 1H), 7.12 (s, 1H), 7.06 (s, 2H), 6.69 (d, J=9.3 Hz, 1H), 6.22 (s, 1H), 4.07-4.03 (m, 1H), 3.88-3.77 (m, 2H), 3.73-3.67 (m, 1H), 2.64 (s, 3H), 2.56 (s, 3H), 2.51 (s, 3H), 2.39 (s, 3H), 2.27 (s, 3H), 1.64-1.50 (m, 13H), 1.46 (m, 3H), 1.12-0.75 (m, 20H). 13C NMR: (125 MHz, CD2Cl2) delta ppm: 282.23 (d), 220.27, 219.73, 184.63 (d), 145.82, 139.23 (d), 139.08, 138.89, 137.46, 136.76, 136.69, 134.24, 134.00, 130.55, 130.36, 129.41 (d), 125.78, 117.59, 115.27, 52.14 (d), 51.63 (d), 34.52, 32.77, 32.64, 29.40, 28.91, 28.00 (m), 26.90 (d), 22.73, 21.34, 21.01, 19.41, 18.63, 18.53, 17.10, 14.21.

With the rapid development of chemical substances, we look forward to future research findings about (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

Reference£º
Patent; Skowerski, Krzysztof; Bieniek, Michal; US2015/158896; (2015); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 246047-72-3, its synthesis route is as follows.,246047-72-3

Complex 1 (2.0 grams) was dissolved in toluene (10 mL), and 3-bromopyridine (1.50 grams, 4 mol equivalents) was added. The reaction flask was purged with argon and the reaction mixture was stirred for approximately 12 hours at about 20 C. to about 25 C. during which time a color change from dark purple to light green was observed. The reaction mixture was transferred into 75 mL of cold (about 0 C.) pentane, and a light green solid precipitated. The precipitate was filtered, washed with 4¡Á20 mL of cold pentane, and dried under vacuum to afford (IMesH2)(C5H4BrN)2(Cl)2RuCHPh 6 as a light green powder (1.8 grams, 86% yield).

With the complex challenges of chemical substances, we look forward to future research findings about (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

Reference£º
Patent; California Institute of Technology; Cymetech, LLP; US6759537; (2004); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is Dichlorotris(triphenylphosphino)ruthenium (II), as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 15529-49-4, its synthesis route is as follows.,15529-49-4

General procedure: The amine (4-CH3-pip, 4-CH2Ph-pip or 4-CH2(OH)-pip;0.34 mmol) was added to a solution of [RuCl2(PPh3)3] (0.26 mmol;0.25 g) in acetone (40 mL). The resulting dark green solution wasstirred for 2 h at RT. A green precipitate was formed, filtered,washed with methanol and ethyl ether, and then dried in vacuum.

With the complex challenges of chemical substances, we look forward to future research findings about Dichlorotris(triphenylphosphino)ruthenium (II)

Reference£º
Article; Chaves, Henrique K.; Ferraz, Camila P.; Carvalho Jr., Valdemiro P.; Lima-Neto, Benedito S.; Journal of Molecular Catalysis A: Chemical; vol. 385; (2014); p. 46 – 53;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI