Ruthenium catalysts

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Into a solution of L1 (0.037 g, 0.09 mmol) in methanol (25 mL) the complex [RuCl2(PPh3)3] (0.07 g, 0.07 mmol) was added. The resulting solution was refluxed for 5 h under visible light (125 W halogen lamp), then cooled at room temperature and concentrated to 2 mL. The precipitate was obtained after the addition of 50 mL of diethyl ether/n-pentane (1:1) to the concentrated solution. The product was filtered, washed with diethyl ether/n-pentane (1:1) (2 * 25 mL) and dried in the vacuum. A solution of 1 in methanol was kept at room temperature for slow evaporation under daylight. Single crystals (light green) suitable for X-ray structure determination were obtained after one week. Yield: 0.49 g, 93%. Elemental analyses for RuC42H36Cl2N7P (841.72): calcd C 59.89, H 4.28, N 11.64%; found C 60.38, H 4.51, N 11.26. MS, (FAB, m/z): 806 [M+, RuC42H36ClN7P], 56 (100%) [NC3H6], 508 [Ru C24H21N7]+, 544 [RuC24H21N7Cl]+, 770 [RuC42H36N7P]+. 1H NMR (CD3OD): delta 3.98, 4.54 (AB system, 2JHH = 15.0 Hz, N-CH2-bzimtrans-bzim, 2H+2H), 4.40 (s, N-CH2-bzimtransPPh3, 2H), 7.05-9.64 (m, aromatic, 27H). 13C{1H} NMR (CD3OD): delta 64.10 (s, N-CH2-bzimtransPPh3), 63.50 (s, N-CH2-bzimtrans-Cl), 110.6-123.4 (m, bzim-ring), 127.2-133.8 (aromatics). 31P{1H} NMR (CD3OD): delta 48.26 (s, PPh3). UV-Vis (H2O): nm [epsilon (dm3 mol-1 cm-1)]: 382 (1660). Cyclic voltammetry (CH3CN, 22 C): Eox = 0.87 mV; Ered = 0.81 mV; E1/2 = 0.84 mV.

15529-49-4, As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

Reference£º
Article; Guadalupe Hernandez; Thangarasu, Pandiyan; Hoepfl, Herbert; Cruz, Julian; Serrano-Ruiz, Manuel; Romerosa, Antonio; Inorganica Chimica Acta; vol. 431; (2015); p. 258 – 265;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

After a 50 mL two-necked flask was purged with argon, ligand 5c (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to prepare a sand product. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain a yellow-green solid product 6c in a yield of 96%.

246047-72-3, 246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

RuCl2(PPh3)3 (1 g, 1 .04 mmol) and the ligand of formula (IVg) (obtained from Example 1 ) (231 .4 mg, 1 .1 mmol) were placed in a 25 mL Schlenk tube under argon atmosphere, and dissolved in dry diglyme (2 mL). The reaction mixture was heated to 165C for 2 h, allowed to cool down to room temperature and stored at -18C to precipitate further overnight. Cold Et2O (2 mL) was added while cooling with a dry ice//so-propa- nol bath. The precipitate was filtrated by cannula, and washed with Et2O (5 times 2 mL). The orange powder was dried in vacuo, affording 530 mg (79%) of Ru(6-MeNN- SEt)(PP i3)Cl2 as an orange powder. An equilibrium of two conformations of Ru(6- MeNNSEt)(PPh3)Cl2 are existent in solution, delivering a doubled set of signals in NMR. For1H-NMR only data of the major conformation is given due to overlapping signals.1H-NMR (300 MHz, CD2CI2): delta 7.67-7.16 (m, 17H, CHarom), 7.01 (d, 1 H, J = 7.8, CHarom), 5.65 (m, 2H), 4.47 (m, 1 H), 3.5 (m, 1 H), 3.34 (m, 1 H), 3.22 (d, 1 H, J = 1 1 .1 ), 2.98 (m, 1 H), 2.59 (m, 1 H), 1 .53 (m, 2H), 0.87 (t, 3H, J = 7.5) ppm.31P-NMR (122 MHz, CD2CI2): delta 48.8, 45.8 ppm.HRMS (ESI+): calculated for C29H32CI2N2PRUS (M+H): 644.0518; found 644.0518 (M+H), 667.0412 (M+Na)

15529-49-4, As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

Reference£º
Patent; DSM IP ASSETS B.V.; BELLER, Matthias; BONRATH, Werner; DE VRIES, Johannes, Gerardus; FAN, Yuting; HUeBNER, Sandra; LEFORT, Laurent; MEDLOCK, Jonathan, Alan; PUYLAERT, Pim; VAN HECK, Richard; (49 pag.)WO2017/194663; (2017); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid., 246047-72-3

As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

General procedure: To a round-bottomed flask with a stir bar was placed with [Ru(PPh3)3Cl2] (868 mg, 2.0 mmol) under the nitrogen. Pre-dried THF(10 mL) was added and the resulting mixture was stirred at room temperature. Then salen-enH2 (536 mg, 2.0 mmol) and a little excess of Et3N (252 mg, 2.5 mmol) in THF (5 mL) were added. The reaction mixture was stirred at room temperature overnight. After removal of solvents, CH2Cl2 (15 mL) was added and the solution was filtered through cilite. The filtrate was concentrated and the residue was washed with Et2O (5mL 2) and hexane (5 mL 2) to give the desired product. Recrystallization from CH2Cl2/Et2O (1:2) afforded green block-shaped crystals of [RuCl(PPh3)(salen)] (3) suitable for X-ray diffraction in three days. Yield: 1011 mg, 76% (based on Ru).

15529-49-4, 15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Article; Tang, Li-Hua; Wu, Fule; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 477; (2018); p. 212 – 218;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(PPh3)3RuCI2 (1 eq., 0.575 g, 0.6 mmol) and 1-(4-fluorophenyl)-1-phenylprop-2-yn-1-ol (compound 16A, 1.5 eq., 0.20 g, 0.9 mmol) were added in 4 ml HCI/dioxane solution (0.15 mol/l). The solution was heated to 90C for 3 hour, after which the solvent was removed under vacuum. Hexane (20 ml) was added to the flask and the solid was ultrasonically removed from the wall. The resulting suspension was filtered and washed two times using hexane (5 ml). The remaining solvent was evaporated affording a red-brown powder; 0.49 g (Yield: 90%). The product was characterized by NMR spectra 31P.31P NMR (121.49 MHz, CDCI3): 628.26.

15529-49-4, The synthetic route of 15529-49-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; GUANG MING INNOVATION COMPANY (WUHAN); W.C. VERPOORT, Francis; YU, Baoyi; WO2014/108071; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

246047-72-3, General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid.

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

A suspension of 1.00 g (1.19 mmol) of [RuCl2(PCy3)(ImH2Mes)(phenylmethylene)] (commercially available from Sigma- Aldrich Inc., St. Louis, USA), 0.15 g (1.47 mmol) of copper chloride and 0.30 g (1.47 mmol) of 2-[((?,Z)-2-propenyl)-phenoxy]-propionarnide as a 3.5:1 mixture of E/Z-isomers in 75 ml of dichloromethane was stirred for 30 min at 400C. The reaction mixture was evaporated to dryness at 40C/10 mbar. The crude title product was dissolved in 100 ml of ethyl acetate and the formed suspension filtered. The filtrate was evaporated to dryness at 40 C/10 mbar. The crude title product was purified by repeated digestion with pentane / THF to yield 0.41 g (53%) of the title compound as a green solid.MS: 655.1 (M+). Anal, calcd. for C3IH37Cl2N3O2Ru: C, 56.79; H, 5.69; N, 6.41; Cl, 10.81. Found: C, 56.23; H, 5.59; N, 6.16; Cl, 10.84.Crystals of the title compound suitable for X-ray crystal structure analysis were grown by vapor diffusion of pentane into a solution of 10 mg of [RuCl2(=CH(o-OCH(Me)CONH2) Ph)(ImH2MeS)] in 0.5 ml of tetrahydrofuran at room temperature.Fig. 3 shows a labeled view of the complex of formula E.

246047-72-3, The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; WO2009/124853; (2009); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Compound 6 (604.4 mg, 1.0 mmol) and degassed morpholine (20 mL) were placed in a 100-mL Young-Schlenk container substituted with argon gas. Thereafter, the Young-Schlenk container was placed in an oil bath, and heated to 120 C. while stirring the components in the Young-Schlenk container, thereby causing a reaction. The progress of the reaction was confirmed by TLC, and the heating was stopped after two hours. Subsequently, the morpholine in the reaction mixture restored to room temperature (25 C.) was removed after collection with a liquid nitrogen trap under reduced pressure (0.1 to 2 mmHg). At this time, the reaction mixture was sufficiently stirred, and the Young-Schlenk container was immersed in water at room temperature (25 C.) to prevent cooling of the Young-Schlenk container by the heat of vaporization. (0217) After sufficiently removing the morpholine, dichlorotris(triphenylphosphino)ruthenium (II) (958.8 mg, 1.0 mmol) and dehydrated toluene (20 mL) were added while introducing argon gas into the container, and the mixture was heated to 110 C. using an oil bath, thereby causing a reaction. The heating was stopped after three hours, and the reaction mixture was restored to room temperature (25 C.). (0218) Subsequently, dehydrated hexane (40 mL) was added to the reaction mixture in an argon gas atmosphere. Thereafter, the whole mixture, including the hexane layer and the toluene layer, in the Young-Schlenk container was stirred and completely mixed. After leaving the mixture unattended for 15 minutes, the generated purple substance was filtered out in an argon atmosphere while being washed with dehydrated diethylether, thereby obtaining a crude product. (0219) Subsequently, the resulting crude product was subjected to column chromatography (developing solvent: chloroform/ethyl acetate=5/1) in which silica gels were accumulated to about 10 cm, thereby removing a compound with high polarity. The effluent was collected to a flask and the collection was continued until the color of the purple liquid was slightly diluted. After this operation, the solution collected in the recovery flask was rapidly concentrated by an evaporator, thereby obtaining 435.1 mg (0.58 mmol, 58%) of substantially pure Compound 2c (RUPCY2) as a purple substance. (0220) The spectral data of Compound 2c (RUPCY2) is shown below. (0221) 1H NMR (500 MHz, CDCl3): delta 7.86 (d, 2H, J=7.4 Hz, C10H6N2), 7.66 (t, 2H, J=7.5 Hz, C10H6N2), 7.56 (d, 2H, J=7.5 Hz, C10H6N2), 3.87 (d, 4H, J=8.1 Hz, PCH2), 2.41 (br, 4H, C6H11), 2.18 (d, 4H, J=12.1 Hz, C6H11), 2.05 (d, 4H, J=10.9 Hz, C6H11), 1.54-1.81 (m, 20H, C6H11), 1.20-1.34 (m, 20H, C6H11). 13C NMR (150 MHz, CDCl3): delta 163.3, 158.3, 134.1, 122.0, 119.9, 40.5 (d, 1JPC=13.0 Hz), 36.3, 30.3, 29.4, 27.7, 27.5, 26.4. 31P{1H} NMR (241 MHz, CDCl3): delta 54.1. HRMS (ESI, (M-Cl)+) Calcd for C36H54ClN2P2Ru+: 713.2494. Found m/z=713.2476. (0222) FIG. 1 shows a result of X-ray single crystal structural analysis (Oak Ridge Thermal Ellipsoid Plot) of Compound 2c.

15529-49-4, The synthetic route of 15529-49-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; National University Corporation Nagoya University; Saito, Susumu; Noyori, Ryoji; Miura, Takashi; Naruto, Masayuki; Iida, Kazuki; Takada, Yuki; Toda, Katsuaki; Nimura, Sota; Agrawal, Santosh; Lee, Sunkook; (42 pag.)US9463451; (2016); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

A common heterocyclic compound, the ruthenium-catalysts compound, name is Dichlorotris(triphenylphosphino)ruthenium (II),cas is 15529-49-4, mainly used in chemical industry, its synthesis route is as follows.,15529-49-4

General procedure: Synthesis of the ruthenium(II) Schiff base complexes (2a-d) was accomplished according to the following procedure: To a solution of Schiff base 1a-d in methanol was added dropwise a solution of NaOH in methanol and the reaction mixture was stirred for 2hat room temperature. The deprotonated ligand mixture was transferred by cannula to a 50-mL three-necked flask fitted with a reflux condenser containing the [RuCl2(PPh3)3] precursor, stirred mixture was refluxed for 4h. A yellow precipitate was then filtered and washed with methanol and ethyl ether and then dried in a vacuum. Complex 2a: [RuCl2(PPh3)3] complex (0.30g, 0.31mmol), Schiff base 1a (0.070g, 0.37mmol), NaOH (0.18g, 0.45mmol), and methanol (20mL) afforded 0.25g (80%) of the title complex as a yellow solid: anal. calculated for C49H48ClNOP2Ru was 68.01C, 5.59H and 1.62% N; found: 68.34C, 5.55H and 1.60% N. UV-Vis: lambdamax(n) (nm), epsilonmax(n) [M-1cm-1]: lambdamax(1) (252), epsilonmax(1) [10020], lambdamax(2) (370), epsilonmax(2) [625], lambdamax(3) (422), epsilonmax(3) [240]; IR (KBr): nux (cm-1): nuC=N (1618), nuC-O (1355); 1H NMR: (CDCl3, 400MHz): 7.30-7.70 (m, 12H: metha-PPh3 and 1H: CH=N), 7.30-7.70 (m, 6H, para-PPh3), 7.21-7.30 (m, 12H, ortho-PPh3), 6.63-6.68 (m, 1H, salicyl-ring), 6.4-6.5 (dd, 3JH,H=1.6Hz, dd, 3JH,H=1.2Hz, 1H, salicyl-ring), 6.04-6.10 (m, 1H, salicyl-ring), 5.85-5.80 (m, 1H, salicyl-ring), 3.85-3.92 (m, 1H, CHPentyl), 1.60-1.80 (m, 3H, CH2Pentyl), 1.29-1.38 (m, 4H, CH2Pentyl), 1.07-1.15 (m, 1H, CH2Pentyl),13C NMR (CDCl3) delta 166.12, 160.83, 135.16, 135, 134.84, 134.26, 134.21, 134.16, 132.12, 132.04, 131.93, 131.91, 129, 128.53, 128.44, 127.62, 127.59, 127.55, 123.36, 121.99, 111.80, 75.92, 32.39, 23.43; 31P{1H} NMR (CDCl3: delta, ppm): 43.15 (s). EPR: no signal was observed.

As the rapid development of chemical substances, we look forward to future research findings about 15529-49-4

Reference£º
Article; Afonso, Maria Beatriz A.; Cruz, Thais R.; Silva, Yan F.; Pereira, Joao Clecio A.; Machado, Antonio E.H.; Goi, Beatriz E.; Lima-Neto, Benedito S.; Carvalho-Jr, Valdemiro P.; Journal of Organometallic Chemistry; vol. 851; (2017); p. 225 – 234;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI