M.W:100-200| Page 19 of 20 | Ruthenium catalysts

Properties and Exciting Facts About 271-95-4

If you want to learn more about this compound(1,2-Benzisoxazole)COA of Formula: C7H5NO, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(271-95-4).

COA of Formula: C7H5NO. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 1,2-Benzisoxazole, is researched, Molecular C7H5NO, CAS is 271-95-4, about Aromaticity of anthranil and its isomers, 1,2-benzisoxazole and benzoxazole. Author is Domene, Carmen; Jenneskens, Leonardus W.; Fowler, Patrick W..

Direct computation of the π-c.d., i.e., the ‘ring current’, of anthranil (1) and its isomers 1,2-benzisoxazole (2) and benzoxazole (3) reveals different patterns of current flow: isomers sustain strong benzene-like currents in the six-membered and bifurcated flow in the five-membered ring, whereas, in keeping with its lower thermodn. stability, anthranil has only a perimeter circulation without sep. monocycle currents. Although the ring current criterion does not offer a sharp distinction between 2 and 3, their difference in thermodn. stability is identical to that between isoxazole and oxazole suggesting an aromaticity order 1 < 2 ≈ 3. If you want to learn more about this compound(1,2-Benzisoxazole)COA of Formula: C7H5NO, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(271-95-4).

Reference:
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

A small discovery about 271-95-4

Here is a brief introduction to this compound(271-95-4)Name: 1,2-Benzisoxazole, if you want to know about other compounds related to this compound(271-95-4), you can read my other articles.

Epoxy compounds usually have stronger nucleophilic ability, because the alkyl group on the oxygen atom makes the bond angle smaller, which makes the lone pair of electrons react more dissimilarly with the electron-deficient system. Compound: 1,2-Benzisoxazole, is researched, Molecular C7H5NO, CAS is 271-95-4, about Chemical evolution. XVII. Mechanisms of the photochemical rearrangements of ortho-substituted benzene derivatives and related heterocycles.Name: 1,2-Benzisoxazole.

The mechanisms of the photochem. rearrangements of isoxazoles, 2-cyanophenol, pyrazoles, and anthranilonitriles were investigated by using low-temperature techniques. Isonitrile (I) was detected by ir (2130 cm-1) and uv in the photoconversion of indoxazene to benzoxazole. I was further identified by independent synthesis and hydrolysis to the formanilide in acid. 2-Cyanophenol (II) is also formed on photolysis of indoxazene; however, no intermediate could be detected in this conversion. Quenching and sensitization studies suggest that the formation of benzoxazole proceeds from the singlet and II from the triplet excited states. The solvent dependence of the reaction suggests that benzoxazole is formed from an initial π,π* excitation and II is formed from an n,π* excitation. The photoconversion of II to benzoxazole may also proceed by I as shown by the uv spectrum of the reaction mixture after irradiation at – 77°. No intermediates were identified in the photochem. conversion of indazoles to benzimidazoles and anthranilonitriles using the above techniques. Emission measurements of the singlet and triplet energies of all the compounds used in this study are reported.

Here is a brief introduction to this compound(271-95-4)Name: 1,2-Benzisoxazole, if you want to know about other compounds related to this compound(271-95-4), you can read my other articles.

Reference:
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Some scientific research about 22766-68-3

The chemical industry reduces the impact on the environment during synthesis, Ethyl quinuclidine-4-carboxylate, , I believe this compound will play a more active role in future production and life.

Ethyl quinuclidine-4-carboxylate, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”22766-68-3

1-Azabicyclo[2.2.2]oct-4-yl(diphenyl)methanol A solution of phenyllithium (1.5-1.7 M in 70 cyclohexane/30 ether, 20.0 mL, 32 mmol) was chilled down to -30 C. under Ar. Ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (1.51 g, 8.23 mmol) in THF (20 mL) was slowly added to the reaction mixture at -30 C. over 25 min. The reaction was allowed to warm up to room temperature over 16 h. The reaction was quenched with H2O and then evaporated to dryness under vacuum. H2O and EtOAc were added, causing a white solid to crash out. This solid was filtered off, to give the title compound (0.79 g). The aqueous phase was further extracted with EtOAc, the combined organic layers were dried over MgSO4, filtered, and concentrated under vacuum. The crude product was treated with EtOAc and hexane and filtered to yield more of the title compound (0.67 g). Total yield (1.46 g, 60.7%). EI-MS m/z 294(M+H+) Rt (1.37 min).

The chemical industry reduces the impact on the environment during synthesis, Ethyl quinuclidine-4-carboxylate, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Laine, Damane I.; Palovich, Michael R.; McCleland, Brent W.; Neipp, Christopher E.; Thomas, Sonia M.; US2007/185155; (2007); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

A new synthetic route of 22766-68-3

The chemical industry reduces the impact on the environment during synthesis, 22766-68-3, , I believe this compound will play a more active role in future production and life.

22766-68-3, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”22766-68-3

Example 33 Preparation of 1-azabicyclo[2.2.2]oct-4-yl(di-3-thienyl)methanol A solution of t-Butyl lithium (1.7M in pentanes, 5.8 mL, 9.86 mmol) was chilled to -78 C. under Ar. 3-Bromothiophene (0.46 mL, 4.90 mmol) dissolved in THF (4.0 mL) was slowly added to the reaction mixture over 6 min. The reaction was stirred for 30 min and then ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.3132 g, 1.71 mmol) in THF (4 mL) was added. The reaction was allowed to warm up from -78 C. to room temperature over 16 h. After 14 hours, the reaction was slowly quenched with water. EtOAc was added, causing a grey solid to crash out. The solid was filtered off to give the title compound (0.3375 g, 64.6%). EI-MS m/z 306(M+H)+ Rt (1.27 min).

The chemical industry reduces the impact on the environment during synthesis, 22766-68-3, , I believe this compound will play a more active role in future production and life.

Some scientific research about 40117-63-3

The chemical industry reduces the impact on the environment during synthesis, Quinuclidine-4-carboxylic acid hydrochloride, , I believe this compound will play a more active role in future production and life.

Quinuclidine-4-carboxylic acid hydrochloride, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”40117-63-3

Step 4. Quinuclidin-4-ylcarbonyl chloride hydrochloride Quinuclidine-4-carboxylic acid hydrochloride (0.192 g, 0.001 mole) was suspended in dichloromethane (5 ml) and dimethylformamide (1 drop) and oxalyl chloride (0.436 ml. 0.635 g, 0.005 mole) were added. The resulting suspension was heated to reflux under an atmosphere of argon for six hours. Following concentration of the suspension in vacuo the residue was suspended in dichloromethane, concentrated in vacuo and finally dried in vacuo to give the title compound as a pale brown solid.

Reference£º
Patent; SmithKline Beecham p.l.c.; US6281226; (2001); B1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

New downstream synthetic route of Ethyl quinuclidine-4-carboxylate

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Ethyl quinuclidine-4-carboxylate reaction routes.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.22766-68-3, Ethyl quinuclidine-4-carboxylate it is a common compound, a new synthetic route is introduced below.22766-68-3

Step 1. A solution of 4-carbethoxyquinuclidine (10.92 g) in THF (155 mL) was treated at-780C with borane-THF (1.0 M, 77.5 mL). The resulting mixture was stirred at -78C for 4 h, then treated with water (50 mL), warmed to room temperature and stirred for an additional hour. The reaction mixture was diluted with ethyl acetate and the aqueous phase was separated and extracted with two further portions of ethyl acetate. The combined organic layers were washed with brine- (twice), dried (MgSO4), filtered and evaporated in vacuo. Purification by silica gel chromatography (eluting with cyclohexane-ethyl acetate [1 :0 to 1 :1]) gave 1-boranyl-1-aza-bicyclo[2.2.2]octane-4- carboxylic acid ethyl ester (7.12 g, 61%) as an off-white solid. 1H NMR (400 MHz, CDCI3) delta 4.16 (2H1 q, J = 6.9), 3.10-3.05 (6H1 m), 1.98-1.93 (6H, m), 1.26 (3H, t, J = 6.9).

Reference£º
Patent; ARGENTA DISCOVERY LIMITED; WO2008/99186; (2008); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

A new synthetic route of Quinuclidine-4-carboxylic acid hydrochloride

The chemical industry reduces the impact on the environment during synthesis, 40117-63-3, , I believe this compound will play a more active role in future production and life.

40117-63-3, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”40117-63-3

Step 8: (S)-4- ((1- (5- (2-methoxyquinolin-1-ium-3-yl)oxazol-2-yl)- 7- (methylamino)- 7-oxoheptyl)carbamoyl)quinuclidin-1-ium mono L-tartrate salt (F8)A solution of 4-carboxyquinuclidin-1-ium chlorhydrate (1.3 eq.) in DMF (0.1 M) was treated with HOBt (1.3 eq.), EDC HC1 (1.3 eq.) and DIPEA (1.3 eq.). The reaction mixture was stirred at room temperature for 10 minutes and then added to F7. The reaction was stirred for at RT for 48 h, filtered and directly purified by RP-HPLC (Acetonitrile/H20 + 0.1 % TFA). The product was obtained as TFA salt which was partitioned between DCM and sat. aq. NaHCO3. Theorganic phase was separated dried over Na2504 and concentrated under reduced pressure. The resulting solid was dissolved in acetonitrile/H20 (1:1) and treated with L-tartaric acid (1 eq.). The resulting solution was lyophilized to obtain the title compound. MS (ESj C29H37N504: 520 (M+H).

The chemical industry reduces the impact on the environment during synthesis, 40117-63-3, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; IRBM SCIENCE PARK S.P.A.; C.N.C.C.S. SCARL COLLEZIONE NAZIONALE DEI COMPOSTI CHIMICI E CENTRO SCREENING; ALTAMURA, Sergio; BIANCOFIORE, Ilaria; BRESCIANI, Alberto; FERRIGNO, Federica; HARPER, Steven; LAUFER, Ralph; ONTORIA ONTORIA, Jesus Maria; MALANCONA, Savina; MONTEAGUDO, Edith; NIZI, Emanuela; ORSALE, Maria Vittoria; PONZI, Simona; PAONESSA, Giacomo; SUMMA, Vincenzo; VENEZIANO, Maria; WO2014/67985; (2014); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

Some scientific research about Quinuclidine-4-carboxylic acid hydrochloride

Preparation of 3-fluorobenzyl quinuclidine-4-carboxylate (compound 91)A mixture of quinuclidine-4-carboxylic acid hydrochloride (100 mg, 0.52 mmol) and thionyl chloride (500 mu, 6.85 mmol) was refluxed for 2 hours. The reaction was cooled at room temperature and the solvent was accurately removed. The residue was suspended in dry DCM and treated with (3-fluorophenyl)methanol (65.8 mg, 0.52 mmol). The reaction was stirred at room temperature for 24 hours. The solvent was evaporated, the residue was dissolved in water (1 ml), basified with NaHCO3 and extracted twice with EtOAc. The combined organic layers were dried over Na2SO4, filtered and evaporated to obtain 3-fluorobenzyl quinuclidine-4-carboxylate (41 mg, 29.8 % yield), which was used in the next step without any further purification.

Reference£º
Patent; CHIESI FARMACEUTICI S.p.A.; AMARI, Gabriele; RICCABONI, Mauro; DE ZANI, Daniele; WO2012/146515; (2012); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

Some scientific research about 22766-68-3

The chemical industry reduces the impact on the environment during synthesis, Ethyl quinuclidine-4-carboxylate, , I believe this compound will play a more active role in future production and life.

A solution of phenyllithium (1 .9 M in 70 cyclohexane/30 ether, 22.30 mL, 42.40 mmol) was cooled down to -30C under nitrogen. A solution of ethyl 1 -azabicyclo[2.2.2]octane-4-carboxylate (III, 2.0 g, 10.90 mmol) in THF (27.0 mL) was slowly added to the reaction mixture at -30C over 25 mins. The reaction mixture was allowed to warm up to room temperature over 16h. The reaction was quenched with water (10.0 mL) and then evaporated to dryness under vacuum. Water (40.0 mL) and ethyl acetate (40.0 mL) were added, causing a white solid to crash out. This solid was filtered off under vacuum, to give a white powder (2.46 g, 76.8%). 1 -azabicyclo[2.2.2]oct-4-yl(diphenyl)methanol (IV): ^H-NMR (300 MHz, CDC ) delta 7.54 – 7.51 (m, 3H), 7.33 – 7.20 (m, 6H), 2.85 – 2.80 (m, 6H), 1 .78 – 1.72 (m, 6H). MS (ESI) m/z calcd for C20H23NO: 293, found 294 [M + H]+.

The chemical industry reduces the impact on the environment during synthesis, Ethyl quinuclidine-4-carboxylate, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; HOVIONE SCIENTIA LIMITED; TURNER, Craig; LOURENCO, Nuno Torres; SOBRAL, Luis; ANTUNES, Rafael; SANTOS, Maria; ESPADINHA, Margarida; (35 pag.)WO2018/87561; (2018); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

Some tips on Quinuclidine-4-carboxylic acid hydrochloride

40117-63-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,40117-63-3 ,Quinuclidine-4-carboxylic acid hydrochloride, other downstream synthetic routes, hurry up and to see

Name is Quinuclidine-4-carboxylic acid hydrochloride, as a common heterocyclic compound, it belongs to quinuclidine compound, and cas is 40117-63-3, its synthesis route is as follows.

Step 5: (S)-4-((1-(5-(2-methoxyquinolin-1-ium-3-yl)-JH-imidazol-2-yl)- 7-(methylamino)- 7-oxoheptyl)carbamoyl)quinuclidin-1-ium mono L-tartrate salt (A5) A solution of 4-carboxyquinuclidin-1-ium chlorhydrate (1.3 eq.) in DMF (0.2 M) was treated with TBTU (1.3 eq.) and NMM (2.6 eq.). The reaction mixture was stirred at room temperature for 10 minutes and then added to a solution of A4 in DMF (0.2 M). The reaction was stirred at RT for 2 h and subsequently was purified by RP-HPLC (Acetonitrile/H20 + 0.1 % TFA). Theproduct was obtained as TFA salt which was partitioned between DCM and sat. aq. NaHCO3. The organic phase was separated, dried over Na2504 and concentrated under reduced pressure. The resulting syrup was dissolved in acetonitrile/H20 (2:3) and treated with L-tartaric acid (1 eq.). The resulting solution was lyophilized to obtain the title compound. 1H-NMR (400 MHz, 300 K, DMSO-d6) oe 8.73 (br s, 1H), 7.94 (t, 2H, J 9.6 Hz), 7.76 (d, 1H, J 8.0 Hz), 7.67 (br s,1H), 7.60 (m, 2H), 7.42 (t, 1H, J8.0 Hz), 5.02 (m, 1H), 4.13 (s, 3H), 3.93 (s, 2H), 3.18 (t, 6H, J7.2 Hz), 2.54 (d, 3H, J4.4 Hz), 2.05-1.91 (m, 8H), 1.51-1.23 (m, 8H). MS (ESj C29H38N603:519 (M+H).