Tag: M.W:400-500

37366-09-9, Name is Dichloro(benzene)ruthenium(II) dimer, molecular formula is C12H12Cl4Ru2, belongs to ruthenium-catalysts compound, is a common compound. In a patnet, once mentioned the new application about 37366-09-9, category: ruthenium-catalysts

A protocol for the synthesis of C2- and C1-symmetric 2,2?-diarylphosphino-substituted biferrocenes (bifep-type ligands) is presented and the preparation of four representatives is described [(S p,Sp)-2-R12P-2?- R 22P-1,1?-biferrocene; 1 (bifep): R1 = R2 = Ph; 2: R1 = Ph, R2 = Cy; 3: R1 = R2 = 3,5-Me2C6H3; 4: R1 = 3,5-Me2-4-OMe-C6H2, R2 = 3,5-(CF3)2C6H3]. In addition, the synthesis of three palladium(ii) complexes ([PdX2(L)], 10: L = 1, X = Cl; 11: L = 4, X = Cl; 12: L = 1, X = C6F5 and of four bifep ruthenium complexes (13: [RuCl(p-cymene)(1)]PF6; 14: [RuI(p-cymene)(1)]PF6; 15: [RuCl(benzene)(1)]PF6; 16: [RuI(p-cymene)(1)]I) is reported. In the solid state the biferrocene unit of complexes 10, 11 and 15 adopt either a (P)-shaped (10) or an (M)-shaped (11, 15) conformation. In solution, palladium complexes 10 and 11 are present as equilibrium mixtures of rapidly interconverting (P)- and (M)-shaped conformers. Rhodium- and iridium-mediated asymmetric hydrogenations of a number of olefins and one imine give products with only low to moderate enantiomeric excess, while in the ruthenium-catalyzed hydrogenation of ketones a maximum e.e. of 82% is obtained. The low enantioselectivities are assumed to be related to the conformational flexibility of bifep-type ligands.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law.category: ruthenium-catalysts. In my other articles, you can also check out more blogs about 37366-09-9

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Related Products of 37366-09-9. Chemistry is an experimental science, and the best way to enjoy it and learn about it is performing experiments.Introducing a new discovery about 37366-09-9, Name is Dichloro(benzene)ruthenium(II) dimer

A series of bipyridyl (bpy) Pt(II) complexes with pi-bonded catecholate (cat) [(bpy)Pt(LM)][BF4]n (2-5) (LM = Cp*Rh(cat), n = 2; Cp*Ir(cat), n = 2; Cp*Ru(cat), n = 1; and (C6H6)Ru(cat), n = 2) were prepared and fully characterized. The molecular structures of the four compounds were determined and showed that the solid-state packing is different and dependent on the pi-bonded catecholate unit. For instance, while the (bpy)Pt(II) complexes 2 and 3 with rhodium and iridium catecholates did not show any Pt···Pt interactions those with the ruthenium catecholates 4 and 5 showed the presence of Pt···Pt and pi-pi interactions among individual units and generated one- and two-dimensional supramolecular chains. The photophysical properties of these compounds 2-5 were investigated and showed that all compounds are luminescent at low temperature, in contrast to the well-known parent compound [(C6H4O 2)Pt(bpy)] (1), which is weakly luminescent at 77 K. Time-dependent density functional theory studies are advanced to explain this difference in behavior and to highlight the role of the pi-bonded catecholate system.

If you are hungry for even more, make sure to check my other article about 37366-09-9. Related Products of 37366-09-9

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Reference of 15746-57-3. Let’s face it, organic chemistry can seem difficult to learn. Especially from a beginner’s point of view. Like 15746-57-3, Name is Cis-Dichlorobis(2,2′-bipyridine)ruthenium(II). In a document type is Article, introducing its new discovery.

A series of mono and polynuclear Ru(II) and Os(II) polypyridine complexes based on the bpy-O-bpy ligand {bpy-O-bpy = bis[4(2,2′-bipyridinyl)]ether} has been prepared. The redox, absorption and luminescence properties of these species have been measured and compared with those of the [Ru(bpy)3]2+ and [Os(bpy)3]2+ parent compounds. Electrochemical oxidation involves the metal centers, and occurs reversibly in acetonitrile at room temperature at about +1.30 and +0.85 V vs. SCE, respectively, for the Ru- and Os-based units. Reduction is ligand-centered and features a first irreversible wave followed by several reversible processes. Absorption spectra are essentially the sum of the spectra of the component monometallic species. Luminescence emission is observed both in acetonitrile solution (298 K) and in frozen matrix (77 K), originating from 3MLCT states. Homometallic complexes display luminescence properties which are close to that featured by the parent [M(bpy)3]2+ species. In heterometallic species luminescence is observed only from the Os-based unit, indicating that efficient energy transfer takes place from the Ru-based to the Os-based moiety. The results indicate that the electronic communication through the bpy-O-bpy bridging ligand is so small that it doesn’t substantially modify the properties of the metal units, which are those of the corresponding isolated [M(bpy)3]2+ units, but large enough to allow efficient energy transfer through the bridge. The bpy-O-bpy bridging ligand appears thus a promising component for the synthesis of multimetallic antenna systems.

If you are interested in 15746-57-3, you can contact me at any time and look forward to more communication.Reference of 15746-57-3

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Chemistry is an experimental science, and the best way to enjoy it and learn about it is performing experiments.Introducing a new discovery about 15746-57-3, Name is Cis-Dichlorobis(2,2′-bipyridine)ruthenium(II), HPLC of Formula: C20H16Cl2N4Ru.

To take advantage of the luminescent properties of d6 transition metal complexes to label proteins, versatile bifunctional ligands were prepared. Ligands that contain a 1,2,3-triazole heterocycle were synthesised using CuI catalysed azide-alkyne cycloaddition “click” chemistry and were used to form phosphorescent IrIII and RuII complexes. Their emission properties were readily tuned, by changing either the metal ion or the co-ligands. The complexes were tethered to the metalloprotein transferrin using several conjugation strategies. The IrIII/RuII-protein conjugates could be visualised in cancer cells using live cell imaging for extended periods without significant photobleaching. These versatile phosphorescent protein-labelling agents could be widely applied to other proteins and biomolecules and are useful alternatives to conventional organic fluorophores for several applications.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law.HPLC of Formula: C20H16Cl2N4Ru. In my other articles, you can also check out more blogs about 15746-57-3

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Related Products of 37366-09-9. Chemistry is an experimental science, and the best way to enjoy it and learn about it is performing experiments.Introducing a new discovery about 37366-09-9, Name is Dichloro(benzene)ruthenium(II) dimer

The mononuclear eta5-cyclopentadienyl complexes [(eta5-C5H5)Ru(PPh3)2Cl], [(eta5-C5H5)Os(PPh3)2Br] and pentamethylcyclopentadienyl complex [(eta5-C5Me5)Ru(PPh3)2Cl] react in the presence of 1 eq. of the tetradentate N,N?-chelating ligand 3,5-bis(2-pyridyl)pyrazole (bpp-H) and 1 eq. of NH4PF6 in methanol to afford the mononuclear complexes [(eta5-C5H5)Ru(PPh3)(bpp-H)]PF6 ([1]PF6), [(eta5-C5H5)Os(PPh3)(bpp-H)]PF6 ([2]PF6) and [(eta5-C5Me5)Ru(PPh3)(bpp-H)]PF6 ([3]PF6), respectively. The dinuclear eta5-pentamethylcyclopentadienyl complexes [(eta5-C5Me5)Rh(mu-Cl)Cl]2 and [(eta5-C5Me5)Ir(mu-Cl)Cl]2 as well as the dinuclear eta6-arene ruthenium complexes [(eta6-C6H6)Ru(mu-Cl)Cl]2 and [(eta6-p-iPrC6H4Me)Ru(mu-Cl)Cl]2 react with 2 eq. of bpp-H in the presence of NH4PF6 or NH4BF4 to afford the corresponding mononuclear complexes [(eta5-C5Me5)Rh(bpp-H)Cl]PF6 ([4]PF6), [(eta5-C5Me5)Ir(bpp-H)Cl]PF6 ([5]PF6), [(eta6-C6H6)Ru(bpp-H)Cl]BF4 ([6]BF4) and [(eta6-p-iPrC6H4Me)Ru(bpp-H)Cl]BF4 ([7]BF4). However, in the presence of 1 eq. of bpp-H and NH4BF4 the reaction with the same eta6-arene ruthenium complexes affords the dinuclear salts [(eta6-C6H6)2Ru2(bpp)Cl2]BF4 ([8]BF4) and [(eta6-p-iPrC6H4Me)2Ru2(bpp)Cl2]BF4 ([9]BF4), respectively. These compounds have been characterized by IR, NMR and mass spectrometry, as well as by elemental analysis. The molecular structures of [1]PF6, [5]PF6 and [8]BF4 have been established by single crystal X-ray diffraction studies and some representative complexes have been studied by UV-vis spectroscopy.

If you are hungry for even more, make sure to check my other article about 37366-09-9. Related Products of 37366-09-9

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Children learn through play, and they learn more than adults might expect. Science experiments are a great way to spark their curiosity, get their minds active, and encourage them to do something that doesn’t involve a screen. 37366-09-9, C12H12Cl4Ru2. A document type is Article, introducing its new discovery., Quality Control of: Dichloro(benzene)ruthenium(II) dimer

The synthesis of binuclear organometallic ruthenium complexes of an expanded porphyrin-type macrocycle is reported; pyrrolic hydrogen bonding donors were found to interact with ancillary ligands in the primary coordination sphere and to stabilize coordinated dioxygen in an eta2-fashion. The Royal Society of Chemistry.

Interested yet? Keep reading other articles of 37366-09-9!, Quality Control of: Dichloro(benzene)ruthenium(II) dimer

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

In an article, published in an article, once mentioned the application of 15746-57-3, Name is Cis-Dichlorobis(2,2′-bipyridine)ruthenium(II),molecular formula is C20H16Cl2N4Ru, is a conventional compound. this article was the specific content is as follows.HPLC of Formula: C20H16Cl2N4Ru

This paper discusses the synthesis of two carbon-based pyridine ligands of fullerene pyrrolidine pyridine (C60-py) and multi-walled carbon nanotube pyrrolidine pyridine (MWCNT-py) via 1,3-dipolar cycloaddition. The two complexes, C60-Ru and MWCNT-Ru, were synthesized by ligand substitution in the presence of NH4PF6, and Ru(ii)(bpy)2Cl2 was used as a reaction precursor. Both complexes were characterized by mass spectroscopy (MS), elemental analysis, nuclear magnetic resonance (NMR) spectroscopy, infrared spectroscopy (IR), ultraviolet/visible spectroscopy (UV-VIS) spectrometry, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), and cyclic voltammetry (CV). The results showed that the substitution way of C 60-py is different from that of MWCNT-py. The C60-py and a NH3 replaced a Cl- and a bipyridine in Ru(ii)(bpy) 2Cl2 to produce a five-coordinate complex of [Ru(bpy)(NH3)(C60-py)Cl]PF6, whereas MWCNT-py replaced a Cl- to generate a six-coordinate complex of [Ru(bpy) 2(MWCNT-py)Cl]PF6. The cyclic voltammetry study showed that the electron-withdrawing ability was different for C60 and MWCNT. The C60 showed a relatively stronger electron-withdrawing effect with respect to MWCNT. The Royal Society of Chemistry 2011.

Do you like my blog? If you like, you can also browse other articles about this kind. HPLC of Formula: C20H16Cl2N4Ru. Thanks for taking the time to read the blog about 15746-57-3

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

A catalyst don’t appear in the overall stoichiometry of the reaction it catalyzes, but it must appear in at least one of the elementary reactions in the mechanism for the catalyzed reaction. 15746-57-3, Name is Cis-Dichlorobis(2,2′-bipyridine)ruthenium(II), molecular formula is C20H16Cl2N4Ru. In a Article，once mentioned of 15746-57-3, COA of Formula: C20H16Cl2N4Ru

The ligand 4,4?-biquinazoline, 1, forms the complex [Ru-(bipy)2(1)]2+ which consists of atropisomeric (Deltalambda/Lambdadelta) and Deltadelta/Lambdalambda) pairs of enantiomers but upon crystallization, spontaneous resolution of the major Deltalambda/Lambdadelta pair occurs to give Deltalambda and Lambdadelta crystals; although the free ligand is covalently hydrated in aqueous solution the ruthenium complex is not.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data.COA of Formula: C20H16Cl2N4Ru, If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 15746-57-3, in my other articles.

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Chemistry is an experimental science, and the best way to enjoy it and learn about it is performing experiments.Introducing a new discovery about 15746-57-3, Name is Cis-Dichlorobis(2,2′-bipyridine)ruthenium(II), HPLC of Formula: C20H16Cl2N4Ru.

A series of TiO2-supported copper(I) dyes, [Cu(Lanchor) (Lancillary)]+ with Lancillary = 2,2?:4?,4?:2?,2?-quaterpyridine (1), 4,4?-bis(6-methyl-[2,2?-bipyridin]-4-yl)-1,1?-biphenyl (2), or 4,4?-bis(6,6?-dimethyl-[2,2?-bipyridin]-4-yl)-1,1?-biphenyl (3), and Lanchor = (6,6?-dimethyl-[2,2?-bipyridine]-4,4?-diyl)bis(4,1-phenylene)bis(phosphonic acid) (4), has been assembled in a stepwise manner. DSSCs incorporating these dyes demonstrate the need for 6,6?-substituents in both ligands in [Cu(Lanchor) (Lancillary)]+; both JSCand VOC increase on going from [Cu(4) (1)]+ to [Cu(4) (2)]+ to [Cu(4) (3)]+. First, second and third generation dyes [(4){Cu(3)}n]n+ (n = 1, 2 or 3) have been assembled using the ‘surfaces-as-ligands, surfaces-as-complexes’ strategy, although the separation between sites of electron injection and hole transporting domains in the multinuclear complexes fails to enhance DSSC performance. Replacing Lancillary 2 in [Cu(4) (2)]+ by the metalloligand {Ru(bpy)2(2)}2+ improves dye performance due to the better spectral response of the heteronuclear [Cu(4){(2)Ru(bpy)2}]3+ complex. This assembly approach presents a flexible method of tuning dye properties while retaining the surface-bound bis(diimine) copper(I) domain.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law.HPLC of Formula: C20H16Cl2N4Ru. In my other articles, you can also check out more blogs about 15746-57-3

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature.37366-09-9, Name is Dichloro(benzene)ruthenium(II) dimer, molecular formula is C12H12Cl4Ru2. In a Review，once mentioned of 37366-09-9, Computed Properties of C12H12Cl4Ru2

Ruthenium(II) dimers [{Ru(eta6-arene)(mu-Cl) Cl}2] (1a-f) readily react with the iminophosphorane-phosphine ligand Ph2PCH2P(=N-p-C5F4N) Ph2 (2), in dichloromethane at room temperature, to afford the neutral derivatives [Ru(eta6-arene)Cl2 {k1-PPh2PCH2P(=N-p-C5 F4N)Ph2}](arene=C6H6 (3a), 1-iPr-4-C6H4Me (3b), 1,3,5-C6H3Me3 (3c),1,2,3,4- C6H2Me4 (3d), 1,2,4,5-C6 H2Me4 (3e), C6Me6 (3f)). Treatment of 3a-f with AgSbF6 in dichloromethane yields the cationic species [Ru(eta6-arene) Cl{k2-P,N-Ph2 PCH2P(=N-p-C5F4N)Ph2}][SbF6] (4a-f). The catalytic activity of complexes 3 and 4 in transfer hydrogenation of cyclohexanone by propan-2-ol has been studied. Among them, the cationic derivative [Ru(eta6-C6Me6)Cl{k2-P, N-Ph2PCH2P(= N-p-C5F4N) Ph2}][SbF6] (4f) shows the highest activity. Electrochemical data for 3 and 4 are also reported.

Note that a catalyst decreases the activation energy for both the forward and the reverse reactions and hence accelerates both the forward and the reverse reactions.Computed Properties of C12H12Cl4Ru2, you can also check out more blogs about37366-09-9

Reference：
Highly efficient and robust molecular ruthenium catalysts for water oxidation,
Catalysts | Special Issue : Ruthenium Catalysts – MDPI